• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1615-1622
• /
• 2009

Generally, the Terminal Based Navigation System(TBNS) used embedded road data searches a path that has less qualitative than The Center Based Navigation System(CBNS). TBNS has not used real time road data but it is recently able to use it with technique such as TPEG. However, it causes to increase a cost of exploring by using real time road data for improvement quality of a path, because of limited performance. In this paper, we propose a Dynamic Heuristic to improve quality of path in the TBNS. Dynamic Heuristic(DH) is not fixed data and is dynamically modified using transferred real time road data from server. In this paper, we propose path-lading algorithm with Maximum Speed Dynamic Heuristic (DH-MAX) and do an experiment. The DH-MAX is to be used the highest speed as DH, in real map divided by same size. And proposed algorithm searches path using the priority searching only of the fixed data, but also the highest speed with real time information. In the performance test, the quality of path is enhanced but the cost of searching is increased than A* algorithm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.291-298
• /
• 2007

This paper presents a signal processing algorithm to control the dynamic bandwidth of a single-degree-of-freedom (SDF) dynamic sensor system. An accelerometer is a representative SDF sensor system. In this paper, a moire-fringe-based fiber optic accelerometer is newly used for the test of the algorithm. The accelerometer is composed of one mass, one damper and one spring as a SDF dynamic system. In order to increase the dynamic bandwidth of the accelerometer, it is needed to increase the spring constant or decrease the mass. However, there are mechanical difficulties of this adjustment. Therefore, the presented signal processing algorithm is very effective to overcome the difficulties because it is just adjustment in the signal processing software. In this paper, the novel fiber optic accelerometer is introduced shortly, and the algorithm is applied to the fiber optic accelerometer to control its natural frequency and damping ratio. Several simulations and experiments are carried out to prove the performance of the algorithm. As a result, it is shown that the presented signal processing algorithm is a good way to broaden the dynamic bandwidth of the fiber optic accelerometer.

• Journal of the Society of Disaster Information
• /
• v.7 no.3
• /
• pp.198-205
• /
• 2011

In this paper, an experimental study is performed in order to determine the effects of interaction between vehicle and structure. For this purpose a wheel tracking machine and an adequate precast concrete deck single span bridge are designed. Results presented in the paper show that interaction between vehicle and structure produce additional effects on dynamic behavior of structure including reversal and contrary behavior.

• Composites Research
• /
• v.26 no.3
• /
• pp.201-206
• /
• 2013

The electrical resistance measurement was investigated as a damage monitoring method. In this study, 0.5 wt% Carbon nanotube reinforced polypropylene (CNT/PP) composites were evaluated under compressive fatigue loading. The shape of specimens was $20^{\circ}$ curved round type. Compression strength and electrical resistance were measured at different sections of specimen during compression. The microcracks of CNT/PP composites were detected based on the changing ratio of electrical resistance. Micro-damage during compressive fatigue test could be detected by electrical resistance measurements. The reason is that the contact points of CNTs in composites decreased under fatigue loading. During compressive fatigue test, larger change of electrical resistance was detected at the microcrack sections. It was proved that microcracks could be detected by electrical resistance measurement under compression test, whereas the real delamination parts were consistent with the predicted results by electrical resistance measurement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.413-422
• /
• 2001

In this study, the effect of hydrodynamic masses is investigated in the dynamic characteristics and earthquake response analyses of the submerged HANARO flow tubes. First, the consistent hydrodynamic masses of the surrounding water are obtained by finite element method. Then, modal analyses and response spectrum analyses are performed and verified by comparing the results with those measured from an experiment. Arbitrary cross-sections of submerged structures and boundary conditions of the surrounding fluid can be considered by using the general benefits of a finite element method comparing with the conventional analytical methods. Practical criteria based on parametric studies are proposed to evaluate the dynamic characteristics of HANARO flow tubes including the hydrodynamic masses.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.1 s.41
• /
• pp.43-50
• /
• 2005

Many highway bridges in Korea need seismic retrofit because only one decade has passed since the seismic design criteria was introduced. For the highway bridges of which bearings are worn and dysfunctional, the validity of seismic retrofit method using laminated rubber bearings was discussed in this study. Real scale RC pier specimens without seismic details were constructed. And then, Pot bearing, Rubber bearing (RB), Lead-rubber bearing (LRB) were applied to these specimens. Through pseudo dynamic test method, dynamic behavior of these RC piers under earthquake was simulated and compared. From the test results, proposed seismic retrofit method was found to be valid.

• Annual Conference on Human and Language Technology
• /
• 2017.10a
• /
• pp.87-91
• /
• 2017

구문분석은 자연언어처리의 오랜 관심 분야로 다양한 접근방법과 알고리즘이 시도되어 계속 발전하고 있다. 하지만 기존의 접근방법은, 학습단계에서는 정답으로부터 추출된 이전 정보를 사용하고 평가 단계에서는 예측으로 이루어진 정보를 활용한다는 근본적인 차이가 있다. 이러한 차이를 극복하기 위한 다양한 시도가 있었고 그 중 동적 오라클 기법이 합리적인 시간 증가와 성능향상을 보였다. 본 연구에서는 이러한 동적 오라클 기법을 한국어 구문분석에 적용하였다. 동적 오라클 기법을 한국어에 적용할 때 고려해야하는 부분에 대해 탐구하고 실험을 통해 동적 오라클 기법을 한국어 구문분석에 적용하여 결과를 살펴보았다.

• 한국어정보학회:학술대회논문집
• /
• 2017.10a
• /
• pp.87-91
• /
• 2017

구문분석은 자연언어처리의 오랜 관심 분야로 다양한 접근방법과 알고리즘이 시도되어 계속 발전하고 있다. 하지만 기존의 접근방법은, 학습단계에서는 정답으로부터 추출된 이전 정보를 사용하고 평가 단계에서는 예측으로 이루어진 정보를 활용한다는 근본적인 차이가 있다. 이러한 차이를 극복하기 위한 다양한 시도가 있었고 그 중 동적 오라클 기법이 합리적인 시간 증가와 성능향상을 보였다. 본 연구에서는 이러한 동적 오라클 기법을 한국어 구문분석에 적용하였다. 동적 오라클 기법을 한국어에 적용할 때 고려해야하는 부분에 대해 탐구하고 실험을 통해 동적 오라클 기법을 한국어 구문분석에 적용하여 결과를 살펴보았다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.145-148
• /
• 2010

본 논문에서 우리는 도로 영역과 하늘 영역, 그리고 도로와 하늘이 아닌 나머지 영역으로 분할하기 위해 동적인(dynamic) 패턴을 이용한 적응적인(adaptive) 병합 방법을 제안한다. 원본영상에서 Mean Shift 알고리즘과 라벨링(Labeling)을 수행하고 영역을 과분할 한다. 컬러에 의해서 도로와 하늘영역이 검출되지 못하는 영역을 위해서 도로 영역과 하늘 영역에서 동적인 패턴 추출한 후 매칭을 통해 유사 영역을 병합한다. 이것은 도로와 하늘의 정보를 현재 환경에서 적응적으로 추출하는 방법이다. 실험에서 정적인(static) 패턴을 사용해서 병합하는 방법과 동적인 패턴을 사용해서 병합하는 방법을 비교하였다. 그 결과, 동적인 패턴을 사용하였을 때 8.12%의 향상된 성능을 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1277-1280
• /
• 2002

화상회의 시스템들은 여러 명의 사람들에게 멀티미디어 데이터를 공유하여 전송하기 때문에 안정적인 대역폭을 보장받지 못하며, 계속적으로 변화하는 네트워크 상태에서 최적의 서비스를 제공하기 위해서는 동적 흐름제어 기법이 필요하게 된다. 동적 흐름제어 기법은 최적의 서비스를 제공하기 위해서 사용 대역폭이 클 경우에는 데이터의 량이 많은 고품질의 데이터를, 사용 가능한 대역폭이 낮을 경우에는 데이터의 량이 적은 저품질의 데이터를 생성한다. 본 논문에서는 기존의 두 가지 흐름제어 기법에서 사용된 측정 요소인 패킷 손실율과 왕복 시간외의 성능을 개선시킬 수 있는 요소인 네트워크 상태에 따른 제어 메시지의 빈도수와 데이터의 량을 이용한 동적 흐름제어 기법을 제안한다. 또한 실험을 통하여 기존의 동적 흐름제어 기법과 제안한 동적 흐름제어기법의 성능을 비교하였다.