• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.195-198
• /
• 2003

정밀 수치해석으로 구한 태핑음 데이터를 기준으로 하여 복합재료 구조물 내의 층간분리 손상의 존재 여부를 판단하는 비파괴 검사법을 제안하였다. 태핑음의 수치 모사를 위해 동적 접촉 알고리듬을 이용한 유한요소법과 경계요소법을 이용하였다. 태핑음 수치해석 과정에 대한 정식화를 수행하고 실제 구조물의 태핑음과 비교하여 수치해석 기법의 타당성을 밝혔다. 웨이브릿 페킷 변환에 근거한 특성 추출법을 이용하여 태핑음으로부터 손상 판단을 위한 특성을 추출하고 손상 판단의 지표가 되는 특성 지수를 정의하였다. 복합재료 구조물에 대한 층간분리 손상 검출과정을 시연함으로써 제시된 태핑음 검사법의 타당성을 밝혔다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.315-320
• /
• 1992

This paper presents the simulation architecture and strategy for dynamic simulation of chemical process and describes key features of developed dynamic simulation system, MOSA(Multi-Objective Simulation Architecture). A plant structure may be partioned into several strong coupling units, called cluster. If this cluster is solved simultaneously, it is possible to simulate whole plant without introducing convergence problem of tear streams. In this study, a flexible modular approach based on clusters was proposed as a promising architecture for dynamic chemical process simulator.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.279-281
• /
• 2012

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 콘크리트재질의 플로팅 구조물의 축소모형을 제작하고 손상을 모사하여 손상 전, 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물의 손상을 탐지하였다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.67-68
• /
• 2001

제지공장은 에너지 다소비 업종이며 고도의 장치산업이기 때문에 초지 설비의 효과적 운영을 통한 생산성 극대화가 경제성과 직결되어 었다. 또한 24시간 연속생산을 하는 초지 설비로 소비자가 선호하는 품질의 종이를 생산하기 위해서는 공정의 안정성 이 매우 중요하다. 이는 공정의 불안정화는 생산제품의 품질 변화를 유발함으로써 균일 성을 저하시키는 악영향을 미치기 때문이다. 제지 공정의 안정화를 저해하는 인자에는 지절, 지종 변화, 조업중단, 조업재개 둥과 공정의 특성상 수반되는 돌발사태 등이 있을 수 있다. 이들 인자 가운데 가장 심각하게 공정의 안정성을 악화시키는 것은 지절의 발 생이라 할 수 있다. 지절이 발생되면 생산성 저하 등의 여러 문제점이 발생하기도 하지 만 다량의 파지가 발생되기 때문에 공정 안정성 면에서 볼 때에도 부득이하게 생성된 다량의 파지를 공정에 재투입하기 위해 재해리해야하므로 많은 양의 백수가 소모되며 이에 따라 예기치 않은 공정 백수의 사용으로 전체 백수계에 갑작스런 변동이 생기게 된다. 백수가 파지의 해리에 사용됨에 따라 공정 내에는 추가적인 청수가 공급되어야 하므로 전체적으로는 청수의 사용량도 늘어난다. 또한 증가된 파지의 재사용도 대부분 의 공장에서 broke chest의 용량이 한정되어 있으므로 이의 적절한 컨트롤은 중요하다. 더욱이 점차 공정이 고폐쇄화됨에 따라 공정 컨트롤에 대한 여유가 적으므로 백수와 공정의 관리는 점차 어려워지고 있다. 공정 시율레이션은 현존하는 공정을 수학적으로 모델화하여 이를 컴퓨터 하드 왜어를 이용해 실제 공장에서 일어나는 상황을 모사하는 것이다. 이러한 공정 모사는 새로운 공장을 설계하기 전에 타당성 조사와 여러 가지 사례조사를 실시할 때, 기존 공 장의 개조나 증설 또는 기존 공장의 운전조건을 실제로 변경하기 전에도 미리 모사를 함으로써 실제 시험 운전을 하는 경우 보다 많은 비용과 시간을 절약할 수 있다. 본 연 구는 백상지 생산 공정 설계도면을 참고하여 상용 시율레이터로 시율레이션 모델을 구 축하고 이를 기반으로 지절 상황을 모사하였으며, 지절 후의 공정 불안정화 상황을 파 악하였다. 또한 이러한 상황의 대책을 강구하기 위해 다양한 공정 조절 방안을 시율레이션 모댈에 적용하여 그 결과를 해석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.769-777
• /
• 2015

In this study, the rheological models were introduced and developed to reflect rate dependent tensile behaviour of concrete. In general, mechanical properties(e.g. strength, elasticity, and fracture energy) of concrete are increased under high loading rates. The strength of concrete shows high rate dependency among its mechanical properties, and the tensile strength has higher rate dependency than the compressional strength. To simulate the rate dependency of concrete, original spring set of RBSN(Rigid-Body- Spring-Network) model was adjusted with viscous and friction units(e.g. dashpot and Coulomb friction component). Three types of models( 1) visco-elastic, 2) visco-plastic, and 3) visco-elasto- plastic damage models) are considered, and the constitutive relationships for the models are derived. For validation purpose, direct tensile test were simulated, and characteristics of the three different rheological models were compared with experimental stress-strain responses. Simulation result of the developed visco-elasto-plastic damage(VEPD) model demonstrated well describing and fitting with experimental results.

• Journal of the Korea Convergence Society
• /
• v.3 no.4
• /
• pp.35-44
• /
• 2012

In this study, a simulation program is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this paper, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation program using the MATLAB/SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.42-46
• /
• 2009

For understanding of high performance liquid rocket engine operating at high pressure, dynamic characteristics of liquid oxygen in a swirl injector operating at supercritical conditions has been numerically investigated. Turbulent numerical model is based on large eddy simulation and contains full conservation laws including Soave modification of Redlich-Kwong equation of state and Chung's model. Preconditioning method is applied to get an effective convergence rate. Numerical analysis results are compared with the one that ideal equation of state applied to. Differences of thermodynamic properties and mixing dynamics are investigated at liquid phase area inside injector and combustion chamber.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.35-38
• /
• 2007

Aiming at time-dependent performance prediction of Liquid Rocket Engine(LRE) system, Modular Program for Conceptual Design of LRE is reviewed, and a modeling and dynamic analysis of rocket engine system with reference to Rocket Engine Dynamic Simulator(REDS) is outlined. Component modeling is based on classical thermodynamic and inviscid theories, and were formulated mathematically in terms of essential parameters. Essential design parameters are addressed. The rocket engine is modeled as a system of pipes with various hydraulic elements, and then the operate characteristic of that elements are simulated by solving conservation equation sequentially.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.1 s.41
• /
• pp.43-50
• /
• 2005

Many highway bridges in Korea need seismic retrofit because only one decade has passed since the seismic design criteria was introduced. For the highway bridges of which bearings are worn and dysfunctional, the validity of seismic retrofit method using laminated rubber bearings was discussed in this study. Real scale RC pier specimens without seismic details were constructed. And then, Pot bearing, Rubber bearing (RB), Lead-rubber bearing (LRB) were applied to these specimens. Through pseudo dynamic test method, dynamic behavior of these RC piers under earthquake was simulated and compared. From the test results, proposed seismic retrofit method was found to be valid.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2006

A 2-D unconfined flow model is developed to analyze annual variations of groundwater level and bank filtration rate (BFR) for an experimental riverbank filtration site in Koryeong, Korea. Two types of boundary conditions are examined for the river boundary in the conceptual model: the static head condition that uses the average water level of the river and the dynamic cyclic condition that incorporates annual fluctuation of water level. Simulations show that the estimated BFR ranges $74.3{\sim}87.0%$ annually with the mean of 82.4% for the static head boundary condition and $52.7{\sim}98.1%$ with the mean of 78.5% for the dynamic cyclic condition. The results illustrate that the dynamic cyclic condition should be used for accurate evaluation of BFR. Simulations also show that increase of the distance between the river and the pumping wells slightly decreases BFR up to 4%, and thereby indicate that it is not a critical factor to be accounted for in designing BFR of the bank filtration system. A sensitivity analysis is performed to examine the effects of model parameters such as hydraulic conductivity and specific yield of the aquifer, recharge rate, and pumping rate. The results demonstrate that the average groundwater level and BFR are most sensitive to both the pumping rate and the recharge rate, while the water level of the pumping wells is sensitive to the hydraulic conductivity and the pumping rate.