• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.623-631
• /
• 2007

In this paper, dynamic elastic module of banded gneiss were calculated on the basis of SPS velocity logging data obtained from a geotechnical test-hole in Pungsan-dong, Hanam, Gyeonggi Province, Korea. This study mainly focuses on the velocity analysis, Q factor calculation relative to attenuation factor, and generation of crack information and its relation with seismic velocity. As a result, P-wave and S-wave velocity of fresh hard rock was 5,559m/s and 3,063m/s, respectively, with Poisson's ratio being 0.28. With these results, dynamic modules were prepared, and crack information analyzed by acoustic televiewer was incorporated to identify the correlation among and between delay of first arrival by crack amplitude ratio, and velocity. The results of this study revealed that the analyzed logging hole mainly consisted of micro crack and a number of cracks and the size of crack aperture, functioned as a variable to seismic velocity in the micro crack area of this type of hard rock.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.458-463
• /
• 2015

These days, streaming users are using ABR (Adaptive Bitrate) technique services by requesting the most adequate video rate selectively based on their own channel states. Most ABR related video rate adaptation techniques are only focused on real-time bitrate adaptations based on their own channel state, and misses energy limited characteristics that come from a mobile device's battery dependence. In other words, the mobile device's important characteristics and accompanying energy consumption are not being considered and causes dissatisfaction over streaming services. In this paper, we propose energy efficient prefetching based dynamic adaptive video streaming techniques, which saves unnecessary consumed energy while providing video rates of the same performance. Our scheme continuously turns off energy modules with enough streaming in the buffer and turns on in case of the opposite situation to save energy. Through the performance evaluation, this study's proposed scheme is 60% better than the previous work at global average mobile download speed.

• Journal of Technology Innovation
• /
• v.26 no.4
• /
• pp.173-198
• /
• 2018

In this paper, we analyze the determinants of the adoption of industrial robots using the data from 42 countries, and thereby examine the factors underlying the rapid expansion of industrial robots in Korea. To this end, the industrial robot data for the years 2001-2016 were drawn from the World Robotics dataset of the International Federation of Robotics (IFR). The explanatory variables included labor market environment variables and innovation capacity variables extracted from the dataset of the relevant international organizations. For data analysis, the Arellano-Bond dynamic panel analysis was performed to control for the endogeneity problem of some explanatory variables. The empirical results confirmed the exceptionally rapid expansion of industrial robots in Korea as compared to other countries, even when considering the national income level, employment cost, and innovation capacity. This phenomenon could be attributed to both the demand-side and supply-side factors. For one thing, changes in the labor market environment, such as an increase in employment costs, have led to an increase of the corporate demand for industrial robots. For another, the supply-side factors, such as an increase in the capital intensity and innovation capacity of companies, have also contributed to the widespread adoption of industrial robots.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.119-128
• /
• 2008

This paper analyzes the relationship between two representative statistical methods for bandwidth extension (BWE): Gaussian Mixture Model (GMM) and Hidden Markov Model (HMM) ones, and compares their performances. The HMM method is a memory-based system which was developed to take advantage of the inter-frame dependency of speech signals. Therefore, it could be expected to estimate better the transitional information of the original spectra from frame to frame. To verify it, a dynamic measure that is an approximation of the 1st-order derivative of spectral function over time was introduced in addition to a static measure. The comparison result shows that the two methods are similar in the static measure, while, in the dynamic measure, the HMM method outperforms explicitly the GMM one. Moreover, this difference increases in proportion to the number of states of HMM model. This indicates that the HMM method would be more appropriate at least for the 'blind BWE' problem. On the other hand, nevertheless, the GMM method could be treated as a preferable alternative of the HMM one in some applications where the static performance and algorithm complexity are critical.

• Proceedings of the Technology Innovation Conference
• /
• 2003.02a
• /
• pp.121-135
• /
• 2003

기술 패러다임의 변화는 전체 산업구조를 변화시킬 뿐 아니라 새로운 산업 분야를 만들어내고 현존하는 산업분야 내의 기술을 변화시킨다. 기술혁신의 산업별 유형에 관한 Paviit의 연구는 이러한 산업분야 별 기술적 특성의 다양성, 즉 기술 패러다임 변화에 토대를 두고 있으며 그의 산업분류는 많은 후행 연구에서 인용되어 왔다. 그럼에도 불구하고 Paviit의 연구는 분석이 특정 시기에 국한되고, 정량적 분석이나 시간의 흐름을 고려한 동적 분석이 부족하며 일부 산업분야의 데이터가 미흡하다는 점 등, 데이터 분석과 관련된 몇 가지 한계점을 가지고 있다. 따라서 본 논문에서는 Paviit 연구의 한계점을 극복하고자 1975년과 1999년 사이에 미국특허청(USPTO)에 등록된 특허에 대한 자료 및 특허인용에 대한 자료를 이용하여 실험적인 분석을 실시하였다. 산업구조의 변화를 고려하여 Pavitt이 제시한 4개의 산업 유형은 1)공급자 지배형(Supplier dominated), 2)규모 집약형(Scale intensive), 3)전문 공급자형 (Specialized suppliers), 4)화학 기반형(Chemical science based), 5)생명과학 기반형(Bio-science based), 6)정보과학 기반형 (Information science based)의 6개로 확장되었다. 이와 같이 도출된 각 산업 유형 별로 A)특허 네트워크(Patent Network), B)기술 궤적 (Technology Trajectory) 두 가지 측면에서 분석을 실시하였다. 우선 특허 네트워크 분석은 기술발달 과정에서의 지식 흐름을 연구하기 위한 분석으로, 산업 내 분석으로는 각 산업에 속한 특허들의 관계의 측면에서 긴밀성을 나타내는 네트워크 밀도와 기술 지식의 집중 정도를 나타내는 네트워크 중심도를 산출하였고 산업간 분석으로는 산업간 지식 흐름의 양상을 살펴보았다. 또한, 기술 궤적 분석에서는 각 산업별 기술의 특성을 분석하는 것으로, 특정 기술 지식의 활용 기간을 통해 기술 주기를 도출하고, 산업 내 평균 권리 청구 항목 수를 이용하여 각 산업의 기술 범위를 비교하였다. 각각의 동적 분석을 통해 시간에 따른 변화 양상이 관찰하였고, ANOVA 분석을 이용하여 통계적 유의성을 검증하였다. 본 연구는 현재의 기술 패러다임 내에서 Pavitt이 제시한 산업 분류의 근거를 보충 설명하였고 특허 정보를 이용하여 기술혁신의 산업별 유형에 대한 폭넓은 분석방법을 제시하였다.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.6
• /
• pp.715-725
• /
• 2000

As a link composition of a double link type level luffing jib crane was determinated through the link composition design, the design to be considered will be computations of the luffing trajectory deviation at the fly jib tip and the required luffing device capacity. This paper is a study regarding the static and dynamic analysis for a mechanism of the crane. The objective of the static analysis is to determinate the capacity and the dimension of luffing device when the crane selfload, rated hoisting load, wind load and inertia force are applied on the crane. The objective of dynamic analysis is to compute the luffing trajectory deviation, velocity and inertia force due to luffing acceleration for each link. All analyses are performed by computer programs. The reliability of the program was checked by results from analyses of the related commercial package. It is expected that the productivity and reliability of the design can be improved by this program which can rapidly and exactly deal with static and dynamic analysis for a given link composition of the crane.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2012

The dynamic stability of railway vehicle has been one of the important issues in railway safety. The dynamic simulator has been used in the study about the dynamic stability of railway vehicle and wheel/rail interface optimization. Especially, a small scale simulator has been widely used in the fundamental study in the laboratory instead of full scale roller rig which is not cost effective and inconvenient to achieve diverse design parameters. But the technique for the design of the small scale simulator about the dynamic characteristics of the wheel-rail system and the bogie system has not been well developed in Korea. Therefore, the research using the small-scaled derailment simulator and the 1/5 scaled bogie has been conducted. In this paper, we did running stability test of 1/5 scaled bogie using small-scaled derailment simulator. Also, for the operation of the small scaled simulator, it is required to investigate the performance and characteristics of the simulator system. This could be achieved by a comparative study between an analysis and an experiment. This paper presented the analytical model which could be used for verifying the test results and understanding of the physical behavior of the dynamic system comprising the small- scaled derailment simulator and the 1/5 scaled bogie.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.86-86
• /
• 2020

수리구조물에 관한 기존 연구들은 대부분 기능성과 안정성 측면에서 본체에 작용하는 유체력에 대한 안정성에 주안점을 두고 있다. 수리구조물 상·하류의 수위차에 기인한 기초지반내의 흐름 및 간극수압 변화는 하천 구조물의 안정성을 연구하는데 매우 중요하다. 해양에서는 파랑하중에 의한 과잉간극수압이 액상화를 발생시켜 해안구조물의 안정에 큰 영향을 미치는 것으로 보고되며, 이에 관련 연구들이 활발하게 진행되고 있다. 반면, 하천구조물 주변 지반의 흐름 및 간극수압 뿐 아니라, 액상화에 관한 연구는 아직 미진한 실정이다. 본 연구에서는 수리구조물 주변의 유동 및 와동 현상 뿐 아니라, 수위차에 따른 지반 내부 유동장과 간극수압에 관한 특성을 분석하기 위해 유체-구조물-지반 비선형 상호작용을 고려할 수 있는 수치수조를 새롭게 제안하였다. 그리고 제안하는 수치수조의 타당성 및 유효성을 검증하기 위해 기존 실험값과 비교·검토를 수행하였고, 그 결과는 거의 유사한 경향을 나타내었다. 또한 이 수치수조에 다양한 입사조건(상·하류 수위차)에 적용하여 유체-구조물-지반의 비선형동적상호간섭 해석을 수행하였다. 최종적으로 수치수조에서 측정한 구조물 주변의 유동, 와동, 수위로부터 수리특성을 논의하였다. 게다가 지반내의 흐름과 간극수압을 측정하여 상·하류 수위차가 수리구조물의 안정성에 미치는 영향을 분석할 수 있었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.373-384
• /
• 2000

To assess the safety of nonlinear steel frame structures subjected to short duration dynamic loadings, especially seismic loading, a nonlinear time domain reliability analysis procedure is proposed in the context of the stochastic finite element concept. In the proposed algorithm, the finite element formulation is combined with concepts of the response surface method, the first order reliability method, and the iterative linear interpolation scheme. This leads to the stochastic finite element concept. Actual earthquake loading time-histories are used to excite structures, enabling a realistic representation of the loading conditions. The assumed stress-based finite element formulation is used to increase its efficiency. The algorithm also has the potential to evaluate the risk associated with any linear or nonlinear structure that can be represented by a finite element algorithm subjected to seismic loading or any short duration dynamic loading. The algorithm is explained with help of an example and verified using the Monte Carlo simulation technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.105-114
• /
• 2018

Membrane fouling in EC-MBR (Electro-Coagulation aided Membrane Bio-Reactor) processes was evaluated according to the operating parameters, such as current density and contact time. In addition, the fouling mechanism was investigated. Compared to the control (i.e., no electro-coagulation), membrane fouling for filtration of the activated sludge suspension after electro-coagulation was reduced significantly. Membrane fouling was improved further when the contact time was doubled under a low current density of $2.5A/m^2$. On the other hand, membrane fouling was not mitigated further, as expected, even though the contact time was doubled from 12 to 24 hr. at a current density of $10A/m^2$. This indicates that the overall decrease in membrane fouling is a function of the product of the current density and contact time. The particle size of the activated sludge flocs after electro-coagulation was changed slightly, which means that the membrane fouling reduction was not attributed to a larger particle size resulting from electro-coagulation. The experimental confirmed that the dynamic membrane made from aluminum hydroxide, Al(OH)3, and/or aluminum phosphate, Al(PO4), which had been formed during the electro-coagulation, played a key role on the reduction of membrane fouling. The dynamic membrane prevents the particles in the feed solution from deposition to the membrane pores and cake layers. Dynamic membrane formation as a result of electro-coagulation plays a critical role in the mitigation of membrane fouling in EC-MBR.