• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.288-294
• /
• 2011

In this paper, the FPGA-based SoC board (Xilinx Virtex-4 ML401 EVM) is adopted to control electrical power inverter system. For marine application, its performance is shown on PC-based system for monitoring electrical characteristics of a power inverter using by the NMEA 2000 protocol. This power inverter system is achieved in Real-Time monitoring and control by dual micro-processor operation on embedded FPGA-based SoC board. One micro processor is for control (Control processor) electrical power inverter using by PWM signal. And the other microprocessor (Communication processor) is for communication with PC-based monitoring system. The two-processor is communicating each other using by dual-port ram (DPRAM). PC-based system user can control and monitor information of the electrical power inverter via NMEA 2000 based communication processor. Control and monitoring information includes the inverter status and configuration. SoC board converts this information to Parameter Group Numbers (PGNs) in the NMEA 2000 protocol. This system can be applied to marine power electronics for distributed power generation, transmission or regulation systems on the ship.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.332.1-332.1
• /
• 2014

정보통신 기술의 발전으로 지능형 자동차와 같은 미래형 고부가 가치 자동차 산업은 지속적인 성장이 기대된다. 그리고, 안전과 직결되는 차간 거리 계측은 다양한 종류의 센서에 의해 측정이 되고 있으며, 운전자 및 탑승자의 생명을 보호하고 있다. 다양한 차간 거리센서 중에서도 전방의 물체 인식 및 넓은 영역, 장거리에 대한 센싱은 레이저를 이용하여 구현할 수 있다. 본 논문은 자동차 뿐만 아니라, 지능형 자율 주행시 전방의 물체 인식 및 거리 계측 센서로 적용이 가능한 반도체 레이저의 설계 및 제작에 관해 소개한다. 반도체 레이저는 물질에 따라 각각 다른 파장대역의 광을 조사하고 있으며 이 레이저 빔은 물체에 맞고 부딪히면 반사되어 되돌아 오는 특성을 가지고 있다. 따라서, 펄스 구동에 의해 단위 펄스당 출사되는 레이저는 전방 물체에 부딪혀 되돌아 오는 시간을 구하게 되면 레이저 광원에서 물체까지의 거리를 구할 수가 있게 된다. 여기서 펄스 레이저의 출력은 물체 감지가 가능한 거리의 정보를 가지고 있으며, 펄스로 구동될 때 반복 주파수 및 펄스 폭은 각각 거리계측 시간과 분해능을 결정하는 주요 요소가 된다. 따라서, 장거리 물체의 계측과 물체 식별 능력을 높이기 위해서는 반도체 레이저의 출력을 높이고 펄스폭을 줄여서 분해능을 향상하는 것이 필요하다. 또한, 물체 인식 또는 계측 시간을 빠르게 하기 위해서는 고속 주파수로 동작하게 되면 가능해 질 것이다. 본 논문은 1,550 nm 대역의 반도체 레이저를 제작하여 펄스 구동으로 출력과 펄스폭을 측정하였다. 또한, 보다 높은 전류에서 칩 단면의 열화를 방지하기 위한 기술을 적용하여 설계 및 제작된 레이저의 특성을 측정하여 향후, 지능형 자동차의 레이저 레이다(LIDAR)와 같은 응용분야에 많이 활용될 수 있을 것으로 기대한다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.360-370
• /
• 2009

Using solar power in wireless sensor networks requires a different approach to energy optimization from networks with battery-based nodes. Solar energy is an inexhaustible supply which can potentially allow a system to run forever, but there are several issues to be considered such as the uncertainty of energy supply and the constraint of rechargeable battery capacity. In this paper, we present SolarSS: a reliable storage system for solar-powered sensor networks, which provides a set of functions, in separate layers, such as sensory data collection, replication to prevent failure-induced data loss, and storage balancing to prevent depletion-induced data loss. SolarSS adapts the level of layers activated dynamically depending on solar energy availability, and provides an efficient resource allocation and data distribution scheme to minimize data loss.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.259-264
• /
• 2016

In this paper, we proposed an arduino-based smart green house management system model and implemented it. The proposed system consists of control unit composed of sensors and arduino, agent program controlling the green house, and web applications providing user interfaces. The control unit transmits data of sensors such as temperature, humidity, illuminance, moisture, etc. to the agent program, and then the agent saves the data in its database. In reverse, control data are transmitted from agent program to control unit. Users can monitor sensed data of green houses and control actuators remotely using web. Plus, smart green house management is available by context awareness and autonomous control functions of the proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.708-714
• /
• 2014

Wireless sensor networks (WSNs) generally consist of densely deployed sensor nodes that depend on batteries for energy. Having a large number of densely deployed sensor nodes causes energy waste and high redundancy in sensor data transmissions. The problems of power limitation and high redundancy in sensing coverage can be solved by appropriate scheduling of node activity among sensor nodes. In this paper, we propose a cellular automata based node scheduling algorithm for prolonging network lifetime with a balance of energy savings among nodes while achieving high coverage quality. Based on a cellular automata framework, we propose a new mathematical model for the node scheduling algorithm. The proposed algorithm uses local interaction based on environmental state signaling for making scheduling decisions. We analyze the system behavior and derive steady states of the proposed system. Simulation results show that the proposed algorithm outperforms existing protocols by providing energy balance with significant energy savings while maintaining sensing coverage quality.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.155-163
• /
• 2007

In this paper, Though sensors of Ubiquitous Middle-ware System based on RFID/USN can usually be reacted from six mouths to two years, they can be exhausted their power of storage battery only one day by communication rates and ranges. That is, the lifetime of sensor node is depended on how much spending power under wireless communication that can communicate its sensing data to its destination. Therefore, it is necessary that each sensor should be designed the Routing path to its destination, in order to remote collecting data. But, in order to improve lifetime of sensor node and modify inner setting, it is opposite to simple searching path method of sensor node by entering external commands. accordingly, 1:n sensor arrangement of n form command and data send-receive that is possible simulation do without interference other sensors and research to different sensor data analysis and conversion ways to convert Sensing data that accept from sensors to actuality information.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.345-352
• /
• 2017

In this paper, we design and implement an educational robot system that can use scratch education with the function of user demanding to perform robot education in actual school site in an embedded environment. It is developed to enable physical education for sensing information processing, software design and programming practice training that is the basis of robotic system. The development environment of the system is Arduino Uno based product using Atmega 328 core, debugging environment based on Arduino Sketch, firmware development language using C language, OS using Windows, Linux, Mac OS X. The system operation process receives the control command of the server using the Bluetooth communication, and drives various sensors of the educational robot. The curriculum includes Scratch program and Bluetooth communication, which enables real-time scratch training. It also provides smartphone apps and is designed to enable education like C and Python through expansion. Teachers at the school site used the developed products and presented performance processing results satisfying the missionary needs of the missionaries.

• Convergence Security Journal
• /
• v.15 no.7
• /
• pp.119-124
• /
• 2015

The purpose of this study was to examine the current status and future prospects through the Classification of sports and ICT convergence technology for the health. Sports and ICT convergence technology could be classified into three types-sports and virtual reality, wearable devices, application and platforms. First, the application of virt ual reality technology gives a user the feeling of reality, fun, and flow through the sensing technology. And this was extended to 'Gamification' concept, gamification of the Nike Plus has become a catalyst in the spread of wea rable devices market. Second, the fastest growing sector in the wearable device area is the health and sports. Chin ese and start-up companies as well as global ICT companies is competing for expanding the pool by releasing the fitness-related wearable devices. Third, the building of platform that can utilize the health and exercise-related dat a collected through the application is expanding.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.695-697
• /
• 2013

In this paper, temperature sensing circuit using by MOS is proposed. It produces the voltage as output and is applicable for the internal IC temperature measurement. It is designed by two current mirrors using MOS to implement the IC in the CMOS fabrication and is applicable for the various applications. It operates in two mode, temperature mode and sleep mode. From the simulation results, output voltage is measured from 0V to 1.2V by sweeping $0^{\circ}C{\sim}125^{\circ}C$ in temperature mode and output current flows under 100pA in sleep mode.