• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.715-716
• /
• 2015

영구자석 전동기(Permanent Magnet Synchronous Motor : 이하 PMSM)는 기존 유도전동기에 비해 자속량, 토크 리플 측면에서 우수하다. 또한 모터 제작시 특수모터가 아닌 실용 모터임에 따라 절연재를 위한 공간, 가격대비 효율 등을 고려해야 한다. 본 논문에서는 팬부하용 전동기의 권선형태가 전절권과 동심권을 가질 경우 두 전동기의 특성을 비교하며, 엔드코일의 다른 형태를 통해 볼 수 있는 차이점을 분석 하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1749-1757
• /
• 1995

The structure of turbulence of fully developed flow through three concentric annuli with both rough inner and outer walls was investigated experimentally for Reynolds number range Re=15000-93000. Turbulence intensities were measured in three (u, v, w) directions, and turbulence shear stresses in annuli of radius ratios .alpha.= 0.26, 0.4 and 0.56, respectively. The result showed that the structure of turbulence for these asymmetric flows was not the same as that for the annulus with smooth walls. The velocity fluctuations of all three components (u, v, and w-directions) showed little discernible variation with Reynolds numbers, but became apparent with the influence of radius ratio (.alpha.) The experimental results for an annulus with the roughened outer wall and a smooth annulus were shown in the figures as a reference. The eddy diffusivities and friction factors were also presented and discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.54-61
• /
• 1999

The fully developed turbulent momentum and heat transfer induced by the roughness elements on the outer wall surfaces in concentric annuli are analytically studied on the basis of a modified turbu-lence model. The resulting momentum and heat transfer are discussed in terms of various parame-ters such as the radius ratio the roughness density Reynolds number and Prandtl number accord-ing to the heating condition. The study shows that certain artificial roughness elements may be used to enhance heat transfer rates with advantage from the overall efficiency point of view.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.587-592
• /
• 1999

The combined effects of radius ratio and roughness pitch ratio on the turbulent fluid flow characteristics of the fully developed flow in the annullar tubes with rib-roughened core walls were determined for Reynolds number ranging from 12,000 to 66,000. To understand the underlying physical phenomena responsible for friction factor enhancement, measurements of velocity profiles and zero shear stress and maximum velocity positions were combined to propose the friction factor correlation. Friction factors were found to be a function of the roughness pitch ratio and radius ratio.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.142-150
• /
• 2002

This study describes a method of finding an optimal path of a soccer robot by using a concentric circle method with different radii of rotation. Comparing with conventional algorithms which try to find the shortest path length, the variable concentric circle method find the shortest moving time. The radius fur the shortest moving time for a given ball location depends on the relative location between a shooting robot and a ball. Practically it is difficult to find an analytical solution due to many unknowns. Assuming a radius of rotation within a possible range, total path moving time can be calculated by adding the times needed for straight path and circular path. Among these times the shortest time is obtained. In this paper, a graphical solution is presented such that the game ground is divided into 3 regions with a minimum, medium, and maximum radius of rotation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.515-519
• /
• 2002

자동차 및 유체기계의 흡기계나 배기계에 사용되는 소음기의 음향성능은 전달손실로 기계성능은 배압으로 표현된다. 유체가 흐르는 관 사이의 임피던스 부정합을 이용하는 반사형 소음기의 경우, 내부 유로에 천공을 주어 음향감쇠를 시키거나 유동을 안정시키는 경우가 많다. 본 연구에서는 동심관형 공명기의 내부 관에 존재하는 천공의 분포 양상이 소음기의 전달손실과 배압에 미치는 영향을 실험을 통하여 고찰하였다. 내부관의 평균 천공율은 일정하지만 길이 방향을 따라서 천공율이 변하는 다섯가지의 공명기에 대한 실험을 수행하고, 성능에 미치는 영향을 살펴보았다. 전달손실은 천공요소의 임피던스 모델을 고려하여 예측한 결과와 비교하였고, 측정된 배압은 모의 해석 결과와 비교하였다. 분석 결과, 천공율이 점점 작아지는 분포나, 작았다가 커진후 다시 작아지는 형태의 분포를 가질 경우, 배압 측면에서 매우 유리하고, 음향 전달손실도 큰 차이가 없음을 밝혔다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.1-9
• /
• 1999

For roughened annular pipes with diameter ratios of 0.26, 0.39, and 0.56 and with Reynolds numbers ranging 13,000 to 67,000, friction factor, autocorrelation coefficients, power spectral density functions, and integral length scales for each flow condition using X-type hot wire anemometry system are experimentally investigated. Distributions of these quantities show that the times which the streamwise autocorrelation coefficients become zero first increase with decreasing the radius ratios of concentric annuli and Reynolds numbers, however the power spectra density functions increase with increasing the radius ratios and Reynolds number.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.81-88
• /
• 1995

Fully developed turbulent flow through three concentric annuli with both the rough inner and outer walls was experimentally investigated for a Reynolds number range Re=15,000-85,000. Measurements were made of the pressure drop, the positions of zero shear stress and maximum velocity, and the velocity distributions in annuli of radius ratios, ${\alpha}=0.26$, 0.4 and 0.56, respectively. The experimental results showed that the positions of zero shear streess and maximum velocity were only weakly dependent on the Reynolds number. It was also found that the position of zero shear stress was not coincident with that of maximum velocity. Furthmore, the former was influenced more sensitively than the latter on the square-ribbed roughness along the axial direction.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1412-1417
• /
• 2004

Concentric annular heat pipes having the length of 200 mm and the outside diameter of 25.4 mm were manufactured and tested. The inside diameters of the heat pipes were 11.3 mm and 8.1 mm and the material of the container was copper. To compare with thermal performances between the concentric annular heat pipe and a copper block with same shape, start-up and isothermal performance were tested. In the result, the start-up of the concentric annular heat pipe was influenced by the start-up of their heat source. The concentric annular heat pipe reached at steady state faster then the same shape of copper block. The maximum wall temperature difference of the concentric annular heat pipe on whole surface was $4.6^{\circ}C$, and the case of the copper block was $16.5^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.142-143
• /
• 2007

나노미터 크기의 동심원 패턴이 형성된 도광판을 설계하기 위한 전산모사를 수행한다. 광원은 LED 1개를 사용하였으며 PMMA 도광판 재질의 파장에 따른 빛의 흡수 현상을 고려하였다. 도광판 위치에 따른 투과광선의 세기 분포, 투과광선의 투과각도 분포 및 편광에 따라 투과광선의 세기가 어떻게 달라지는지 살펴보았다.