• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.317-322
• /
• 2015

A process for the concurrent welding and extruding of pipe was designed for continuous production of fin tubes. Unlike a conventional pipe extrusion, the new process is able to extrude a pipe continuously without limit of length by using spring type wire material. The current paper provides the basic research for welding during the extrusion using a spring type wire material. The object of the current study is to investigate the possibility that the spring type wire material could be extrude into a welded pipe. The appropriate extrusion ratio was selected through investigation of loads using computer simulations. As a result, experiments showed that pipe could be welded and simultaneously extruded with spring type wire material of aluminum. The tensile strength of the welded and extruded aluminum pipe can reach 80% of tensile strength of original aluminum feedstock.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.06a
• /
• pp.35-46
• /
• 1995

TR 단조공법은 기존의 프레스에 특수장치를 장착하여 프레스의 수직힘과 수평함을 동시에 갖도록 하여 일체형의 크랭크샤프트를 제작하는 공법으로, 연속입자흐름의 크랭크쓰 로우를 제작할 수 있기 때문에 보다 우수한 특성의 크랭크샤프트를 제작할 수 있다. TR 단 조공법을 이용한 크랭크샤프트의 제작은 하나의 소재로 단조하여 제작하기 때문에 기존과는 다른 작업공법 및 전용장비가 필요하나 국내에서는 이러한 공법이나 설비의 부재로 인해 생 산되지 못한 제품이었다. 본 개발에서는 중형엔진용 크랭크샤프트의 국산화를 실현한 측면 에서 TR 단조공법 및 장치에 대한 소개와 본 단조공법을 적용하여 제작된 크랭크샤프트의 제반 특성평가를 수행하여 균일한 물성 및 연속입자흐름에 따른 피로강도의 향상 여부를 확 인하였다.

• Transactions of Materials Processing
• /
• v.14 no.3 s.75
• /
• pp.200-206
• /
• 2005

In general, a lot of small electrode is needed for making precision injection molds, such as cell phone mold and precision connector mold, because of the limitations of NC milling process. Those small electrodes usually have very simple shapes and the actual cutting time is so short, but many NC programs and set-up process, a very complicated and time consuming Job, are needed for each electrode. This paper deals the method for increasing the productivity of machining electrodes. In this work, the process standardization of machining electrode was done and special jig fer machining small electrodes was developed. Automatic tool path optimization software was also developed to minimize tool changing time. In addition, in-line cutting tool measuring system was adopted. The productivity of machining for small electrode has been increased up to $100\%$.

• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.536-541
• /
• 2003

In this paper, the rigid-viscoplastic finite element method is employed together with an iteratively force-balancing method to analyze a piercing and trimming process with a spring-attached die in hot former forging. An actual piercing and trimming process with a spring-attached die is investigated in detail and a generalized analysis model is proposed. A multi-stage hot former forging process is simulated under various spring constants. The analyzed results are discussed in order to investigate the effects of spring constants on the metal flow lines and the formed shapes. Then an optimal piercing and trimming process in hot former forging is devised.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.570-579
• /
• 2004

정상상태 압연공정의 오일러리안 공정해석 모델에 관한 연구들을 종합 정리하였다 본 연구의 유한요소해석 모델은 집합조직의 발전에 따른 이방성과 미세기공의 성장에 따른 기계적 성질의 열성화를 평형방정식에 직접 결합하였다 따라서 집합조직의 발전 및 기공률의 변화를 예측하고 동시에 이방성과 기계적성질의 열성화를 해석에 반영할 수 있다. 더불어 오일러리안 해석에서 형상예측을 위하여 자유곡면 수정법과 유선추적법을 유한요소해석 모델에 결합하였다 본 연구의 공정해석 모델을 평판 압연, 클래드압연, 삼차원 사각단면봉의 압연 및 형상압연에 적용하여 집합 조기의 발전, R-값, 항복곡면, 결함성장 등의 기계적성질의 변화 예측과 클래드 압연시에 이중재 접촉면 형상, 배불림, 형상압연 시의 단면변화 등의 형상변화 예측을 보여주었다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.286-293
• /
• 2002

Microstructure and the electrical porperties of a ZnO-based multilayered chip-type varistor(abbreviated as MLV) with Ag/Pd(7:3) inner electrode have been studied as a function of firing of temperature. At 1100$^{\circ}$C, inner electrode layers began to show nonuniform thickness and small voids, which resulted in significant disappearance of the electrode pattern and delamination at 1100$^{\circ}$C. MLVs fired at 950$^{\circ}$C showed large degradation in leakage current, probably due to incomplete redistribution of liquid and transition metal elements in pyrochlore phase decomposition. Those fired at 1100$^{\circ}$C and above, on the other hand, revealed poor varistor characteristics and their reproductibility, which are though to stem from the deformation of inner electrode pattern, the reaction between electrode materials and ZnO-based ceramics, and the volatilization of $Bi_2O_3$. Throughout the firing temperature range of 950∼1100$^{\circ}$C, capacitance and leakage current increased while breakdown voltage and peak current decreased with the increase of firing temperature, but nonlinear coefficient and clamping ratio kept almost constant at ∼30 and 1.4, respectively. In particular, those fired between 1000$^{\circ}$C and 1050$^{\circ}$C showed stable varistor characteristics with high reproducibility. It seems that Ag/Pd(7:3) alloy is one of the electrode materials applicable to most ZnO-based MLVs incorporating with $Bi_2O_3$ when cofired up to 1050$^{\circ}$C.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2006

This paper presents test results on reduced beam section (RBS)program addressed panel zone (PZ) strength as the key variables. PZ strength has been much debated issue for several decades. A desirable range of PZ strength has not yet been proposed despite the fact that a significant amount of RBS test data is available. Test results from this study and by others showed that panel zones could easily develop a plastic rotation of 0.01 radian without causing distress to the beam flange groove welds. At this deformation level, the amount of beam distortion (i.e., buckling) was about one half that developed in strong PZ specimens. A criterion for a balanced PZ strength that improves the plastic rotation capacity while reducing the amount of beam buckling is proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.177-177
• /
• 2009

이동통신 시스템의 소형화 경량화 다기능화 추세에 따라 세라믹 모듈의 정밀도 및 집적도가 중요한 요소로 부각되고 있다. 이러한 모듈의 고집적화 추세에 대응하기 위하여 세라믹 소성시 수축율 제어가 필수적인 요소로 부각되고 있으며, 이에 따라 X, Y축의 소성 수축율을 0에 근접하게 제어하는 무수축 소성 기술이 요구되고 있다. 선행연구를 통하여 $Al_2O_3$/Glass/$Al_2O_3$ 구조의 glass infiltration법에 의한 무수축 소성 기술 구현 가능성을 확인하였으나, 아직 해결해야 할 문제점들이 있다. glass가 $Al_2O_3$층으로 infiltration되는 과정에서 glass층이 de-lamination 되는 결함이 발견되었으며 이는 유전체 기판의 Q값을 낮추고 기판의 신뢰성에 악영향을 줄 수 있어 이에 대한 개선이 필요한 실정이다. 본 연구에서는 $Al_2O_3$/Glass/$Al_2O_3$ 구조의 glass infiltration법에 의한 선행 실험에서 관찰된 기판 내부의 de-lamination 현상에 대한 원인을 규명하고 해결책을 제시하고자 하였다. glass 유동과 바인더 burn-out이 동시에 진행됨에 따라 기공이 생성되며 glass가 점성유동함에 따라 이 기공이 glass층으로 모이게 되어 de-lamination 현상이 발생하는 것으로 사료된다. 이를 해결하기 위하여 de-lamination층에 $Al_2O_3$의 tamping을 시도하여 glass층의 기공이 빠져 나갈 수 있는 channel 을 형성하고, 남아있는 기공을 $Al_2O_3$로 채우는 효과를 얻을 수 있었다. 이에 따라 기판의 밀도와 Quality factor 값이 향상되었으며 미세구조가 치밀한 무수축 기판을 제작할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.146-151
• /
• 2013

In this study, the effect of addition of waste glassy slag produced from recycling of spent catalyst (denoted as waste glass hereafter) on the physical properties of artificial aggregates made of coal bottom ash and dredged soil (7 : 3 by weight base) was evaluated. Especially, the bloating behavior of artificial aggregates was analyzed by performing the relation study between the apparent density, water absorption and microstructure. The apparent density of artificial aggregates increased slightly with sintering temperature at $1050{\sim}1150^{\circ}C$, but decreased above $1150^{\circ}C$ showing bloating phenomenon. The bloating behavior of artificial aggregates was decreased so the apparent density increased with amount of waste glass added. Also, the water absorption of artificial aggregates decreased with sintering temperature. Above $1200^{\circ}C$, big fissure and much liquid were formed at the surface of artificial aggregates and these phenomena could be suppressed by increasing amount of waste glass added. The artificial aggregates fabricated in this study had an apparent density of 1.1~1.6 and water absorption of 8~22 % which meet KS requirements for the artificial lightweight aggregates.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.133-144
• /
• 1997

Concrete plasticity models fol the analysis of reinforced concrete members in plane stress are studied. The proposed plasticity model for reinforced concrete provides a unified approach combining plasticity theory and damage models. It addresses strength mhancement under rnultiaxial compression. and tensile cracking damage. The model uses multiple failure criteria for compressive crushing and tensile cracking. For tensile cracking behavior. rotating-crack and fixed-crack plasticity models are compared. As crushing failure criterion, the Drucker-Prager and the von Mises models are used for comparison. The model uses now and existing damnge models fbr tension softening, tension stiffening. and compression softening dup to tensilt. cracking. Finite element analyses using the unified method are compatxd with existing rxpcrimcntal r.esults. To vei.ify the proposcd crushing and cracking plasticity models, the experiments have load capacities govc11.nc.d either by compressive crushing of'concrete or by yi~lding of' reinforcing steel.