• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.130-140
• /
• 1992

The physical benchmark problem on the direct-contact condensation under the horizontal occurrent stratified flow was analyzed using the RELAP5/MOD2 and /MOD3 one-dimensional model. Analysis was peformed for the Northwestern experiments, which involved condensing steam/water flow in a rectangular channel. The study showed that the RELAP5 interfacial heat transfer model, under the horizontal stratified flow regime, predicted the condensation rate well though the interfacial heat transfer area was underpredicted. However, some discrepancies in water layer thickness and local heat transfer coefficient with experimental results were found especially when there is a wavy interface, and those were satisfied only within the range.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.618-624
• /
• 1986

Some studies on direct-contact condensation in cocurrent stratified flow of steam and subcooled water were reviewed. Several approaches have been performed to develop the condensation heat transfer coefficient relationshipo. The local Nusselt number is correlated in terms of the local water Reynolds and Prandtl numbers as well as the steam Froude number. In addition, a turbulence-centered model, developed principally for gas absorption in several geometries, is modified by using calculated interfacial paramters for the turbulent velocity and length scales. These approaches result in a fairly good agreement with the data, whereas, the turbulence-centered model is here rexcommened since it is based on the turbulent properties which may be closely related to the condensation phenemena.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.138-139
• /
• 2000

최근 광섬유의 전송 용량을 효율적으로 극대화하기 위한 방안으로서 파장 분할 다중화 (WDM: Wavelength Division Multiplexing) 방식의 광통신 시스템이 제안되어 사용되고 있다. WDM 시스템에서는 각 채널 (channel) 마다 각기 다른 파장의 광신호가 할당되어 있기 때문에, 여러 파장이 다중화된 광신호에서 원하는 파장의 광신호를 선택하기 위해서는 파장 선택 필터 (wavelength selective filter) 가 필요하다. 격자 보조 동방향 결합기 (GACC: Grating-Assisted Codirectional Coupler) 는 전파 상수(propagation constant) 가 서로 다른 두 도파로 사이에서의 광파워 교환이 파장에 의존하는 특성을 가지고 있기 때문에 WDM 시스템에 응용될 파장 선택 필터로서 많은 연구가 되어 왔다$^{(1),(2)}$ . (중략)

• Elastomers and Composites
• /
• v.40 no.3
• /
• pp.159-165
• /
• 2005

Reactive monomer, glycidyl methacrylate (GMA), was grafted onto low density polyethylene (LDPE) using peroxide and then reactive blend with nylon-6 was rallied out by corotating twin screw extruder. Grafting of GMA was identified using FT-IR. Graft ratio or GMA increased with reaction temperature, peroxide concentration and styrene comonomer concentration. It is observed that tensile elongation and tensile strength or LDPE-g-GMA/nylon-6 blend were higher than those of LDPE/nylon-6 blend. Morphology of blend was analyzed using SEM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1183-1192
• /
• 1989

본 논문에서는 평면변형률 상태하에서 안정하게 성장하는 균열선단에 집중 되어있는 강소성역의 해석에 역점을 두어 재결정법과 탄.소성유한요소법을 도입하여 안정 성장균열 선단에 형성되는 균열 성장저항에 직접적인 영향을 미치고 있는 소성 역의 크기나 형태에 대한 실험 및 해석을 하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.916-925
• /
• 1988

The Navier-Stokes equations of the vorticity-stream-function form are solved numerically for the flow past a semicircular arc for Reynolds numbers in the range 0.1

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.133-138
• /
• 1999

3차원 트러스 구조물을 설계대상으로, 구조계와 제어계의 동시최적설계문제에 대하여 고찰하였다. 구조 설계에대한 최소중량설계와 제어 설계에대한 외란 억제문제를 설계목적으로 고려하였다. 그리고, 본연구의 유용성을 입증하기위한 수치 시뮬레이션의 결과를 기술하였다.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.255-266
• /
• 1998

One-step continuous reactive blend with EPDM is investigated using a modular intermeshing corotating twin screw extruder This was performed via anionic polymerization mechanism. Mechanical properties were characterized and compared with mechanical blends.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.305-315
• /
• 2021

An intermeshing corotating twin screw extruder is mainly used for compounding polymeric materials. Twin screw extruder can adopt modular-type screw configurations, which directly controls the quality and productivity of the products. The types, shapes, and specifications of the screw and kneading elements are summarized, and the effects of screw configuration on the processabiliy of the materials are discussed. The principles of screw configuration universally applied to mass production of general-purpose resins are explained, and the guidelines of screw combination according to the roles of feeding, melt mixing, and metering zones are listed. The strategies of screw combination suitable for various cases, such as side feeding of liquid additives or inorganic fillers, reactive extrusion, devolatilization process, production of products requiring bright color and transparency, and processing of materials with low apparent specific gravity, are presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.76-84
• /
• 2009

The vibration and stability of thin, flexible corotating disks in an enclosed compressible fluid is investigated analytically and compared with the results of a single rotating disk. The discretized dynamical system of the corotating disks is derived in the compact form of a classical gyroscopic system similar with a single disk. For the undamped system, coupled structure-acoustic traveling waves destabilize through mode coalescence leading to flutter instability. However, it is found that the flutter regions of the corotating disks are wider than those of a single disk. A detailed investigation of the effects of dissipation arising from acoustic or disk damping is also performed. Finally, in the presence of both acoustic and disk dampings, the instability regions are found and compared with those of a single disk. Although this study does not allow a radial clearance between the disk and the enclosure, the computational frame work of the problem can be expanded to the system having the radial clearance in an enclosure.