• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.917-923
• /
• 2001

This paper presents the fabrication and testing results of a dual stage microactuator system for fine positioning of magnetic heads in hard disk drives. An electrostatic rotary microactuator was newly designed and fabricated. The microactuator was integrated into the head gimbal assembly of a disk drive system and its dynamic characteristics were investigated. Experimental results show that natural frequency and voltage gain of the microactuator are 4.3 KHz and 25 nm/V and the dual stage microactuator system achieves the tracking accuracy of 30 nm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.482-487
• /
• 2001

This paper introduces a Lorentz force type four-pole self-bearing motor, where the new pole arrangement of a stator is intended to function both as a synchronous PM motor and as a magnetic bearing. The Lorentz force type has some good points such as linearity of control force, freedom from flux saturation, and high efficiency unlike conventional self-bearing motors. Mathematical expressions of torque and radial force are derived to show that they can be separately controlled regardless of rotational speed and time. To verify the proposed theory, a prototype is made, where a ring-shape outer is actively controlled in two radial directions while the other motions are passively stable supposing the radial stability. Through some experiments, it is shown that the proposed scheme can provide high capability and feasibility for a small high-speed self-bearing motor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.495-498
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined by a simple sound insulation measurement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.955-956
• /
• 2014

Active noise control is noise reduction method by generate anti-phase control signal for destructive interference of through control speaker. purpose of this paper is create a virtual control source at a using the DBAP(Distance Based Amplitude Panning) algorithm which is one of the three-dimensional sound reproduction method, and verified through the experimentally for noise control method through the virtual control source. We compared active noise method by using one control speaker with active noise control method by using DBAP algorithm.

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1045-1052
• /
• 2005

Tn this paper. dual rotor disk configuration with a coreless stator is proposed for the Lorentz force type integrated motor hearing system. An experimental compensation for the effects of high order harmonics is performed using the digital controller of the experimental setup. The runout profile and rotor unbalance are also identified by the extended influence coefficient method. The experimental results confirm that this compensation scheme effectively attenuates the rotor vibration all over the operating range of rotational speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1465-1468
• /
• 2006

Railway is superior to the other land transportation systems in aspects of environmental problems. Environmental problems are not considered during a preliminary feasibility study. Investment for railway is low because of low B/C(benefit/cost)ratio in the economical efficiency analysis during the preliminary feasibility study. The body of this paper studies the railway noise which can reflect environmental problems an assessment of environmental impact. The body of this paper studies the presumption of The Benefit Cost of railroad noise arresting it will be able to reflect the evaluation environmental matter of the effect which it gives to an environment.

• 소음진동
• /
• 제5권2호
• /
• pp.147-152
• /
• 1995

본 글에서는 현재 유럽과 우리나라와 유사한 도로사정을 가진 일본, 홍콩 에서 행해지고 있는 타이어/도로 소음에 관한 연구 실태와 그 자료를 소개함으로써 자동차 자체의 소음뿐 아니라 환경 소음 관절에서 간과할 수 없는, 타이어/도로 소음에도 관심을 가져야 할 이유를 제시하였다. 본문에서 살펴본 각 국의 노력과는 별도로 유럽 공동체(EC)는 1991년에 타이어/도로 접촉에 의해 발생하는 소음을 제한 할 수 있는 기준이 1995년 10월 이전에 결정될 수 있다고 발표하고 있으며, 이에 따라 도로 표면과 자동차의 종류에 따른 소음 측정 방법에 대한 표준을 연구하기 위하여 ISO내에 ISO/TC 43/SC 1/WG 33라는 그룹이 1991년 설립되었다. 이와 같이 유럽에선 과거부터 행해온 실제도로 표면에 대한 연구뿐만 아니라 미래를 내다본 제도적인 측면에 까지 관심을 가지고 있음을 알 수 있다. 지금까지 언급한 바와 같이 다공성 도로 표면에 따른 초기 소음 감소량이 5dB(A) 이상이고 도로 수명이 다함에 따라 그 감소량은 0dB(A)가 된다. 그러나, 이 소음 감소량은 저소음 도로 표면에 대한 연구 동기를 제공하기에 충분한 가치가 있다고 생각된다. 이제 국내에서도 자동차 자체의 소음의 제어나 차음벽의 설치뿐 아니라 조소음 도로 표면에 대한 연구 가 병행되어야 할 것이다.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.223-232
• /
• 2001

Aiming at a small axial pump with a levitated rotor, an axial-type self-bearing motor is presented, which has a rotor wish four permanent magnets and two stators with two-pole three-phase windings. In this system, only the axial motion of rotor is actively controlled by two opposite self-bearing motors just like in the case of an axial magnetic bearing, while the other motions are passively stable. For rotation, It follows the theory of a four-pole three-phase synchronous motor. This paper Introduces schemes for design and control of the self-bearing motor and shows some experimental results to Prove the feasibility of application for the axial Pump.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.441-444
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined through field measurements.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.283-286
• /
• 2004

This work presents a 3-axis active mount featuring the piezoelectric stack actuators. The inertia configuration for the piezoelectric actuators is adopted to achieve appropriate force and moment in each axis. In addition, the rubber mount is integrated to provide stiffness for system loading. In order to analyze the active mount, the governing equation for the force and moment is derived and its validity is demonstrated by comparing generated force and moment of each actuator between analysis and experiment. In addition, the natural frequency of each actuator is identified though both simulation and experiment.