• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.393-402
• /
• 1995

The structural analysis of the reactor coolant system mainly consist of too fields. The one is the static analysis considering the impact of pressure and temperature built up during normal operation. The other is the dynamic analysis to estimate the impact of postulated events such as the seismic loads or postulated branch line pipe breaks event. Since the most important goal of the RCS structural analysis is to prove the safety of the RCS during normal operation or postulated events, a widely proven theory having enough conservatism is adopted. The load occurring on the RCS during normal operation is considered as the basic design loading condition throughout whole plant life time. The most typical characteristic of the RCS during normal operation is the thermal expansion of the RCS caused by reactor coolant with high temperature and pressure. Therefore, the exact estimation on the thermal movement of the RCS is needed to get more clear understanding on the thermal movement behavior of the RCS. In this study, the general structural analysis concept and modeling method to evaluate the thermal movement of the RCS under the normal plant operation condition are presented. To discuss the validation of the suggested analysis, analysis results are compared with the measured data which ore referred from the standardized 1000 MWe PWR plant under construction.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.417-424
• /
• 2002

컴퓨터는 인간의 모든 꿈과 희망을 실현시켜 줄 수 있는 마법상자는 아니다. 정보화 시대라고 일컫는 현재, 정보의 가치를 더해주는 컴퓨터의 중요성은 날로 커지고 있는 반면 인간의 존엄성은 경시되고 있다. 많은 사람들은 요즘 사회가 커다란 도덕적 위기에 빠졌다고 걱정하지만 컴퓨터 사용과 관련된 윤리적 문제에 대해서는 심각하게 느끼지 못하고 있는 것 같다. 정보통신 기술의 발달에 따라 새로운 교육의 필요성이 대두되고 있다. 기존의 전통적인 교육방식에서 사이버 윤리 교육은 교과서 중심의 단편적인 교육이었기 때문에 학습자의 흥미를 유발하지 못하였으며, 교육자와 학습자의 상호작용이 부족하여 사이버 윤리 교육의 효과가 미흡하였다. 정보통신 기술의 발달에 따라 새로운 교육의 필요성이 대두되고 있다. 기존의 전통적인 교육방식에서 사이버 윤리 교육은 교과서 중심의 단편적인 교육이었기 때문에 학습자의 흥미를 유발하지 못하였으며, 교육자와 학습자의 상호작용이 부족하여 사이버 윤리 교육의 효과가 미흡하였다. 이런 관점에서 본 논문은 정보통신 시대가 수반하고 있는 사회적 영향력과 윤리적 이슈들에 대하여 좀더 교육적인 측면으로 접근해 윤리교육의 현황과 문제점, 그리고 체계적인 확산방안에 대해 살펴보았다. 본 논문에서는 사이버공간에서 윤리 교육을 받는 청소년들을 중심으로 그들에게 새로운 윤리교육의 한 형태인 사이버공간에서 관련된 문제들을 교육적인 측면으로 해결할 수 있는 방안을 제시하고자 한다. 그러나, 무엇보다 우리가 명심해야 할 것은 인간의 존엄성은 그 어떤 이유를 막론하고 존중되어야 한다는 사실이다. 검증되지 않은 스토리 보드에 의한 저작 단계로 바로 돌입하고 있는 것이 한국의 실정이라 하겠다. 따라서 본 프로젝트에 의해 개발 된 교수 설계 도구는 교육/학습 컨텐츠의 품질 보증을 위한 방법론인 교육 공학의 체제적 교수 설계 이론 Model (Instructional System Design Model), 특히 그 중에서도 이 분야의 사실상의 표준 이론(de facto standard)인 Dick & Carey 교수와 Gagne 교수의 인지주의 ISD Model을 기반으로 정교한 교수 설계와 코스 맵 설계를 가능하게 함으로써 학습 컨텐츠의 품질 보증 활동을 지원 할 수 있는 도구로 개발하였다. 특히 Linux 기반에서 PHP로 개발 함으로써 Platform에 구애받지 않은 사용 환경을 구현 하였으며 향후 많은 e-Learning Platform에 교수 설계 모듈로 장착 함으로써 기존의 e-Learning Platform들의 가치를 높일 수 있는 계기가 될 것으로 생각한다.실징후를 파악하는데 그치지 않고 부실의 원인을 파악하고 이에 대한 대응 전략을 수립하며 그 결과를 측정하는데 활용될 수도 있다. 따라서 본 연구에서는 기업의 부도예측 정보 중 현금흐름정보를 통하여 '인터넷기업의 미래 현금흐름측정, 부도예측신호효과, 부실원인파악, 비즈니스 모델의 성격규정 등을 할 수 있는가'를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.748-757
• /
• 2007

This paper is intended to solve the technical problem that fails in large-capacity induction motor starting due to serious voltage drop during starting period. One induction motor that is established already can reach in steady-state using reactor starting method but the voltage magnitude of PCC (point of common coupling) has dropped down a little. When the same capacity induction motor is installed additionally in the PCC, where the existing induction motor is operating, voltage drop becomes more serious by starting of additional induction motor. As a result, the additional induction motor fails in starting. Therefore, voltage compensation method is proposed so that all of two induction motors can be started completely. First, modeling technique is described in order to implement starting characteristics of large induction motor. And then, this paper proposes strategic starting scheme by proper voltage compensation that use no-load transformer tap control (NLTC) and step voltage regulator (SVR) for starting of two large induction motors successfully and improving the feeding network voltage profile during the starting period. The induction motor discussed in this paper is the pumped induction motor of 2500kVA capacity that is operating by KOWACO (Korea Water Resources Corporation). Modeling and simulation is conducted using PSCAD/EMTDC software.

• Korea journal of population studies
• /
• v.31 no.1
• /
• pp.127-146
• /
• 2008

Over the past four decades reproductive behavior has changed slowly in much of the African countries. The average total fertility rate has fallen from six or more to near five today. Between 1960 and 2000 the largest fertility decline occurred in such Northern African countries as Algeria, Libya, and Morocco. The mortality rate has decreased in most African countries. The purpose of this study is to review the pattern of demographic transition in African countries. At first, this study focuses on the fertility transition. In Africa, the total fertility rate has decreased from 6.59 to 4.85 between 1960 and 2000. The mortality rate has also decreased in most of African countries. It is also interesting to find that there is a clear difference among African countries. In terms of infant mortality rate, Libya shows the lowest rate(17), while Mali and Somalia remain still high rate(142 and 133, respectively). This study tests a path model in which infant mortality rate acts as an intermediate variable between three socioeconomic variables and the fertility rate. The findings of this paper substantiate some of our hypotheses on the interrelationships among socioeconomic variables, infant mortality rate, and fertility rate. The result also shows the indirect effects of socioeconomic variables on fertility rate via infant mortality.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.319-328
• /
• 2003

The purpose of this paper is to develop a medical laser system using the semiconductor diode laser in order to photodynamic cancel therapy as a light source. The ideal light source for photodynamic therapy would be a homogeneous nondiverging light with variable spot size and specific wavelength with stability. After due consideration in this point, in this paper, we used a diode laser resonator of 635nm wavelength. The development laser system have a statistical laser out beam with accuracy control using the constant current control of method and clinic-friendly with compact. In order to protect the diode resonator from the over-current, the rush-current and electrical fault, we specially designed. The most importance therapeutic factor are the radiation mode for cancer therapy. So we developed the radiation mode of CW(Continuous Wave), long pulse, short pulse, and burst pulse and can adjust the exposure time from several milli-second to several minute. The experimental result shows that laser beam power was increased linear from 10mW to 300mW according to the increasing input current and the increasing exposure time. The developed new compact diode laser system have a stability of output power and specific wavelength with easy control and transportable for many applications of PDT.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.96-102
• /
• 2011

The objective of study was carried out to find a proper entrance date for breaking dormancy depending on cutting and entrance date into greenhouse investigating plant growth and flowering characteristics of chrysanthemum 'Baekma'. Days to visible bud formation and days to flowering were increased as cutting date was delayed. The flowering rate of cutting on September 18 was 100% while cutting on October 30 did not induce flower bud formation. Flower characteristics were surveyed after 'Baekma' and 'Jinba' rooted cuttings were planted on September 10. Branching formation rate of 'Baekma' was gradually increased as entrance date was delayed while that of 'Jinba' was about 70-80% regardless of entrance date. Lethality of 'Baekma' moving into greenhouse on December 20 was 1.5% by cold injury. 'Jinba' started to die on November 10 by cold injury and lethality of 'Jinba' moving into greenhouse on December 20 was 21.7%. Thus, lethality of 'Jinba' was about 5-14 times higher than that of 'Baekma'. Days to visible bud formation and days to flowering were decreased as entrance date was delayed in chrysanthemum 'Baekma'. Days to visible bud formation of entrance date on November 10 and December 10 were 67.9 and 50.3, respectively. On the other hand, that of 'Jinba' was increased until entrance date on December 10 and decreased on December 20. Based on these results, it was suggested that dormancy of 'Baekma' was started at late September and completed at late October.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.377-377
• /
• 2017

다목적댐은 비어있는 저수지 용량을 활용, 상류에서 유입되는 홍수를 저류하여 하류의 피해를 경감시키고, 저류된 저수량을 활용하여 갈수시 생 공 유지용수 등을 목적에 맞게 하류로의 공급에 주요 목적이 있다. 이를 위해 댐 계획에는 상류에서 유입되는 목표 빈도 계획홍수량을 산정하고, 이에 따른 여수로의 계획방류량 등이 포함된 홍수 조절 방안이 수립된다. 다목적댐은 그 중요도 때문에 많은 사회적 재화(財貨)가 투입되어 하천에서 가장 높은 빈도인 200년 빈도 홍수량에 대비하도록 설계되어 있다. 그러나 대부분의 댐 하류 하천에서는 긴 연장에 따른 투자비용 등의 한계로 상류 댐에 미치지 못하는 100년 빈도 이하로 설정되어있다. 이런 상 하류의 홍수계획간 괴리로 댐의 계획 방류량 수준의 홍수 조절시에는 하류 하천에 재난상황으로 발생할 우려가 있다. 기상예보의 고도화로 단기 예보의 정밀도가 높아져 단기간 댐 운영에는 효과적으로 활용되고 있다. 하지만 5일 이후를 예보하는 중 장기예보는 아직까지도 불확실성이 높은 실정이다. 여기에 기후변화 등 기상의 불확실성을 고려하여 홍수기 초 장마와 태풍 등의 영향에 대비하기 위해 무작정 댐을 저(低)수위로 운영하면 이후 여름 가뭄에 취약해 지고, 반대로 저수량 확보의 고(高)수위 운영을 할 경우 연이은 태풍 등 홍수상황에 취약해 지게 된다. 최근 '14~'15년도 낙동강 수계에 여름가뭄으로 안동 임하댐이 가뭄단계에 돌입하는 등 홍수기초 적정 저수량의 확보는 안정적 수자원시설 운영에 중요성이 커지고 있다. 본 연구에서는 이러한 불확실한 기상상황에 대비하고 댐의 이치수 목적 달성을 위해, 홍수기초 가능한 저수량을 확보하되 계획홍수량이 들어와도 하류피해는 경감시킬 수 있는 저수지 수위를 찾고자하였다. 이를 위해 낙동강 수계 9개 다목적댐(안동, 임하, 성덕, 보현산, 군위, 김천부항, 합천, 남강, 밀양댐)을 대상으로 댐 설계 및 직하류 하천 상황을 고려한 "홍수기초 댐 저수량 확보 수위 검토"를 실시하였다. 댐 직하류 하천의 홍수대비 상황 및 홍수조절시 제약사항 등을 조사해 주요지점(Critical Point)을 선정하고 그 지점의 홍수량을 파악한다. 이어서 저류함수 모형을 활용하여 댐별 저수지 모의 운영을 실시하였다. 대상 댐 저수지에 계획홍수량을 유입시키고 수위를 점차 조정하면서 하류 지점의 홍수량 내의 규모로 방류를 하는 저수지 모의 운영을 실시하였다. 이때 저수지의 계획홍수위를 초과하지 않는 등 안정적 홍수조절이 가능한 특정 수위를 찾아 하류 하천 환경을 고려한 댐 운영 수위로 선정하였다. 최근 홍수기총에는 강수량이 계속 줄어들고 홍수기 이후 더 많은 강수가 내리는 등 기후변화로 댐 운영은 날로 어려워지고 있다. 본 연구의 분석 결과는 홍수기초 가뭄 및 장마 또는 태풍 등에 대비하여 댐 운영의 이 치수 두 가지 목적을 달성하는데 참고가 될 수 있을 것이다.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.221-230
• /
• 2021

The study attempts to suggest potential problem and solutions expected in the process of implementing KASS, which is currently under development to improve the domestic navigation safety system, and to summarize improvement effects of domestic navigation safety system anticipated by the implementation of KASS. Challenges expected in the process of implementing KASS exists in four aspects: emotional, technical, cost, safety aspects. When KASS is implemented and operates, various benefits can be realized. Benefits include cost savings by not using navigation safety systems during takeoff and landing; reduction of flight delays and cancellations by removing airway congestion; increase of aircraft accommodation capacity; reduction of carbon emissions; preparation for future aviation demands and improvement of air transportation safety; and reduction of flight accidents. In conclusion, it is expected to enter into an era of more intense competition due to increased aviation demands. In order to survive in this competitive environment, early introduction of KASS is indispensable. Analysis results of this study are expected to provide reference information for academic research in this area. A possible future research topic include a study predicting the changes in the navigation safety systems introduced by KASS and proposing practical and useful ways to respond the changes.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.22-44
• /
• 2022

Lacquer, in addition to high-end crafts such as lacquerware inlaid with mother-of-pearl, was an important strategic material used in a wide range of fields such as industry, architecture, and munitions during the Japanese colonial era. In particular, as the demand for lacquer used in munitions soared in the 1940s when the war started, a ticket system was introduced to restrict its distribution. Meanwhile, Japan experienced a chronic shortage of lacquer as a result of the rapidly increasing demand for it, and thus went on to import Chinese lacquer after the late 19th century. After the 1910s, the market share of Chinese lacquer reached 90%, and the local situation in China began to affect the supply and demand for lacquer in Japan. To counteract the issue, the Japanese government increased the production of lacquer in Joseon. As for the project to increase lacquer production in Joseon, objective indicators were prepared through a number of tests in the 1910s and 20s, which paved the way for the project to begin in earnest in the 1930s. Lacquer trees were planted and training classes on how to collect lacquer were held throughout the country. The Japanese government promoted the lacquer production industry as a promising side job for Koreans. The project, implemented in various parts of the country, reaped fruitful results, and it provided the basis for lacquer production in Korea that has continued to this day. At that time, the major regions in the southern part of the country where the project was concentrated were Wonju, Okcheon, and Hamyang, regions that are still known today as major production sites. The improved method of collecting lacquer taught to Koreans by the Japanese has now become the main method of collecting lacquer in Korea. This study attempts to identify the current status of the project to increase lacquer production through various records from the Japanese colonial era with a view to contributing to the study of modern lacquer craft history.

• Asia Marketing Journal
• /
• v.10 no.3
• /
• pp.103-125
• /
• 2008

After having changed its corporate brand from LG Fire & Marine Insurance to LIG Non-life Insurance in 2006, LIG Insurance has successfully built the corporate image as the leading insurance financial group by engaging in extensive corporate social responsibility activities. LIG, as 'a partner for sharing precious moments of life', intended to provide customers a new value of an insurance by building up the new corporate brand. It established three values to be shared internally. First was to instill a brand value orientation within the organization. Second, the firm identified the brand's value to be delivered to the customers. Third, they defined the image objective to be communicated to them. Based on these set of objectives, the company designed and implemented an integrated marketing communication(IMC) strategy over several years. The result was a successful transition to the new corporate brand name.