• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.62-62
• /
• 2010

인공관절은 노인성 질환이나 자가 면역질환, 신체적인 외상 등에 의한 관절의 손상 부위를 대체하기 위해 고안된 관절의 인공대용물로써 최근 인구의 고령화와 질병, 사고의 증가에 따라 그 수요가 급격히 증가하는 추세를 보이고 있다. 인공관절의 소재로는 현재 metal-on-polymer(MOP) 소재가 가장 많이 사용되고 있는데, metal 소재로서는 Co-Cr계 합금이, polymer 소재로서는 초고분자량 폴리에틸렌 (ultra high molecular weight polyethylene) 이 주로 사용되고 있다. MOP 소재의 경우 충격흡수의 장점이 있는 반면 wear debris에 의한 골용해로 인해 관절이 느슨해지는 문제점이 발생하여 재시술의 주요 원인이 되고 있다. 또한 metal 소재로 주로 사용되고 있는 Co-Cr계 합금의 경우 인공관절의 마모, 부식 현상에 의해 Co, Cr등이 체내에 용출되어 세포독성의 문제를 일으킬 수 있다는 단점을 가지고 있다. 본 연구에서는 고체원소 이온주입 기술을 이용하여 316L stainless steel 기판에 niobium을 이온 주입 한 후 niobium nitride (NbN) 박막을 증착하여 counterpart 소재인 초고분자량 폴리에틸렌(UHMWPE) 의 마모를 줄이는 실험을 진행하였다. Pin-on-disk tribometer를 통해 마모 테스트를 진행하여 NbN 박막의 내마모특성을 평가하였으며, 박막의 결정구조 및 화학적 특성을 평가하기 위해 XRD, AES 분석을 수행하였다. 또한 박막의 경도와 표면조도를 측정하기 위해 micro hardness tester, AFM을 이용하였다.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.100-109
• /
• 2013

This study aims to analyze 19 kinds of mineral contents in hair targeting 311 people in Seoul who suffer from hair loss. The results are as follows: 1. The average contents of all kinds of minerals were within the standards. 2. Sodium, potassium, and selenium were more detected in men than in women; calcium, magnesium, copper, and manganese were more detected in women than in men; toxic elements, mercury, antimony, and arsenic were more detected in men than in women, which was statistically significant. 3. As the age increased, potassium (p<.05), iron (p<.01), manganese (p<.05), chromium (p<.01), and mercury (P<0.01) increased gradually, which was statistically significant. In particular, the content of mercury exceeded its standard in those over fifty. 4. Selenium (p<.01), lead (p<.05), aluminum (p<.05), and arsenic (p<.01) were more detected in natural hair than in permanent or colored hair. Calcium (p<.001), magnesium (p<.001), and manganese (p<.01) were more detected in permanent or colored hair than in natural hair. They were all statistically significant.

• Economic and Environmental Geology
• /
• v.31 no.6
• /
• pp.509-518
• /
• 1998

Fly ashes have been deposited around Youngwol power plant until electrostatic precipitator was installed in 1981. Fresh fly ash samples from electrostatic precipitator and weathered fly ash from ash disposal site were collected from Youngwol power plant, along with 65 soil samples of nearby area to look into the influence of PFA deposit on the soils in surrounding area. In chemistry, EPA does not contain high level of toxic elements and there is no notable concentration of toxic elements in soil near power plant. Total concentrations of Co, Cr, Cu, V, and Zn are 13 ppm, 89 ppm, 73 ppm, 157 ppm and 57 ppm in PFA. Concentrations of theses elements in ash-rich soils are 15 ppm, 78 ppm, 60 ppm, 133 ppm and 68 ppm, and those in ash-poor soils are 19 ppm, 70 ppm, 38 ppm, 91 ppm and 97 ppm. But these metal elements are highly concentrated in magnetic fractions of EPA (Co, 129 ppm; Cr, 217 ppm; Cu, 210 ppm; V, 197 ppm; Zn 90 ppm). Considering the process of long-term weathering of PFA, potentially toxic substances from the ash could be leached into soils and groundwater.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.472.1-472.1
• /
• 2014

현재 Cu(In,Ga)Se2나 Cu2ZnSn(S,Se)4 (CZTSSe)계 박막태양전지의 버퍼층으로 가장 많이 사용되는 물질은 CdS이다. 하지만 Cd의 독성 문제로 인해 사용에 제약이 있고, CdS의 작은 밴드갭(~2.4 eV)으로 인해 단 파장 영역에서 광활성층의 빛 흡수를 저해하는 문제 때문에 새로운 대체 물질을 찾으려는 연구가 많이 이루어지고 있다. 이러한 관점에서, ZnS계 물질은 독성 원소인 Cd을 사용하지 않고, 3.6 eV 정도의 큰 밴드갭을 가지기 때문에, CdS 버퍼층을 대체하기 위한 물질로 관심을 받고 있다. ZnS계 버퍼층을 증착하는 위해 chemical bath deposition (CBD), molecular beam epitaxy (MBE), thermal evaporation, spray pyrolysis, sputtering, elecrtrodepostion 등의 다양한 공정이 사용될 수 있다. 본 연구에서는 상기의 다양한 공정 가운데, 공정 단가가 낮고, 대면적 공정에 용이한 CBD 공정을 이용하여 ZnS계 버퍼층을 증착하는 연구를 수행하였다. 용액의 조성, 농도, 공정 온도, 시간 등을 비롯한 다양한 공정 변수가 ZnS계 박막의 morphology, 조성, 결정성, 광학적 특성 등 다양한 특성에 미치는 영향이 체계적으로 연구되었다. 또한, 상기 ZnS계 버퍼층을 CZTSSe 박막태양전지에 적용하여 CdS를 성공적으로 대체할 수 있음을 확인하였다. 본 연구를 통하여 ZnS계 버퍼층이 향후 친환경적인 박막태양전지 제조에 활용될 수 있는 가능성을 확인할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.160-160
• /
• 2011

I-III-VI족 화합물 반도체인 $CuInS_2$(CIS) 박막은 Cu(In,Ga)$Se_2$에 비해서 독성원소를 사용하지 않으므로 환경 친화적이고 Ga, Se를 사용하지 않아 조성의 조절이 쉬우며 태양전지의 이상적인 밴드갭인 1.5 eV에 근접한 1.53 eV의 직접천이형 에너지 밴드갭을 가지고 있어 태양전지의 광흡수층으로써 유망한 재료이다. CIS 박막 증착에는 다양한 방법이 있으며 본 연구에서는 chamber를 진공으로 만들고 CIS를 구성하는 용액으로부터 미립자화 된 입자를 노즐을 통하여 팽창시켜 에어로졸을 생성하고 입자들의 운동에너지를 증착에 직접 이용 할 수 있는 Aerosol Jet Deposition (AJD)라는 방법을 이용하려고 한다. 이 방법은 높은 증착속도로 우수한 박막을 성장시킬 수 있는 저비용 및 단순공정으로 CIS를 증착 할 수 있는 새로운 방법이다. 물을 용매로 하여 수용액 상태의 $CuCl_2{\cdot}2H_2O$, $InCl_3$, $(NH_2)_2CS$를 혼합하여 CIS 용액을 제조하고 carrier gas를 주입하여 CIS 용액을 노즐로 이동시켜 팽창시킨다. 용액이 팽창되면서 온도가 감소하여 응축이 일어나며 이 응축된 용액이 가열된 기판 위에 충돌하여 용매가 증발하면서 결정화된 CIS가 증착이 된다. CIS의 특성은 용액의 전구체 비율, 기판 온도, 팽창 전 압력, chamber 압력 등의 영향을 받는데 본 연구에서는 기판 온도를 증착변수로 선택하여 CIS 박막을 증착하고 박막의 특성을 고찰하고자 한다.

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.321-326
• /
• 2005

We investigated the effects of pollutants on two pine species (Pinus koraiensis and Pinus rigida) in an industrial region, using a physiological approach. We measured the growth and physiological parameters (photosynthetic activity and chemical contents) of the pine trees in relation to environmental pollutants. The concentrations of manganese (Mn), fluorine (F) and chlorine (CI) in needles of two pine species at the damaged site were significantly higher than those at the control site, and concentrations of essential elements (P) and chlorophyll in needles at the damaged site were significantly lower than at the control site. The light-saturated net photosynthesis $(P_{sat})$, apparent quantum yield $(\Phi)$, carboxylation efficiency (CE) of both pines at the damaged site were significantly lower than those at the control site. The length of shoots and survivorship of needles of two pines at the damaged site were significantly lower than those at the control site. Especially, at damaged site, growth of shoots and needle longevity of P. koraiensis are larger than those of P. rigida.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.43-49
• /
• 2007

The metals we are familiar with(Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn, etc) are common elements and conservative pollutants. Although metals are often vital constituents of the metabolism of living organisms(trace elements}, a number of them are toxic if their concentration exceeds a certain threshold. It has long been recognized that measurements of trace metals in natural waters are often subject to large errors in terms of precision and accuracy. Since 1975 in US and European countries, seawater concentration of many trace metals have been shown to be factors of 10-1,000 lower than those previously accepted. Vertical profiles have been found to be consistent with known biological, physical and/or geochemical processes. These are resulted from major advances in analytical instrumentation and methodology for trace elements, and greater attention has been given to assuring the elimination of contamination during sampling, storage, and analysis.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.213-227
• /
• 2006

The geochemical evolution of mine drainage and leachate from waste rock dumps and stream water in Pb-As-rich abandoned Sechang mine area was investigated to elucidate mechanisms of trace metals. Total and sequential extractions were applied to estimate the distribution of trace metals in constituent phases of the waste rocks and to assess the mobility of trace metals according to physicochemical conditions. These discharged waters varied largely in chemical composition both spatially and temporally, and included cases with significant]y low pH (in the range 2.1-3.3), and extremely sulphate (up to 661 mg/l and metal contents (e.g. up to 169 mg/l for Zn, 27 mg/l for As, 3.97 mg/l for Pb, 2.99 mg/l for Cu, and 1.88 mg/l for Cd). Arsenic and heavy metal concentrations at the down-stream of Sechang mine have been decreased nearly to the background level in downstream sites (sites 8 and 16) without any artificial treatments. The oxidation of Fe-sulfides and the subsequent hydrolysis, of Fe(II), with precipitation of poorly crystallized minerals, constituted an efficient mechanism of natural attenuation which reduces considerably the transference of trace metals (i.e. Fe and As) to rivers. The dilution of drainage by mixing with pristine waters provoked an additional decrease of trace metal concentrations and a progressive pH increase. On the other hand, the most soluble cations (i.e. Zn) remained significantly as dissolved solutes until the pH was raised to approximately neutral values. With respect to ecotoxicity, it is likely that the Zn pollution is of particular concern in Sechang mine area. This was confirmed by the sequential extraction experiment, where Zn in wet waste-rock samples occurred predominantly in the exchangeable fraction (65-89% of total), while Pb was the highest in the reducible and carbonate fractions, and Cd, Cu and As in the residual fraction. Pb concentration in the readily available exchangeable fraction (34-48% of total) was dominated for dried waste rock samples. Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreased in the order of Zn>Pb>Cd>As=Cu.

• Prospectives of Industrial Chemistry
• /
• v.22 no.3
• /
• pp.11-30
• /
• 2019

나노스케일 구조를 갖는 납 기반 할로겐화 페로브스카이트는 조절 가능한 방출 파장과 결함 내성(defect-tolerance)을 가지며, 높은 광 발광 양자 수율과 물질의 실온 합성 가능성으로 인해 최근 많은 관심을 받았다. 이러한 특성은 디스플레이에 적용되었을 때, 넒은 색 영역을 표현할 수 있다. 그러나 납의 독성이 페로브스카이트 디스플레이의 상용화를 방해한다. 따라서 최근에 비납계 할로겐화 페로브스카이트 나노결정에 대한 연구가 진행되었다. 본 글에서 우리는 비납계 페로브스카이트 나노결정의 설계 및 광 물리적 특성 및 발광 소자로의 응용에 대한 우리의 견해에 대하여 서술하며, 할로겐화 페로브스카이트 나노결정의 특징, 납을 대체할 수 있는 후보 원소에 대한 논의, 콜로이드성 비납계 페로브스카이트 나노결정을 합성하는 방법, 이들의 광학 특성을 제어하고 향상시키는 방법, 발광소자에서 비납계 페로브스카이트 나노결정을 사용한 최근의 연구 동향 및 이 분야에 대한 전망을 서술한다.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.15-22
• /
• 2019

Coal combustion products are generated during coal combustion and can be grouped into fly ash and bottom ash depending on collection methods. Fly ash and bottom ash can be recycled for various purposes based on their characteristics. Australia is the fourth largest coal production country in the world and reuses coal ash as cement, concrete, mine filler, and agricultural soil amendment. When fly ash is used as a supplement for cement and concrete, strength of the cement and the durability of the concrete can be improved. Use of coal combustion product for mine backfill stabilizes underground mine voids and stores a large amount of coal ash in the voids. Because of alkalinity of coal combustion products, it can neutralize acid mine drainage when used for mine backfill. In addition, it can be used as an agricultural soil amendment to improve acidity and physical properties of the soil and to supply plant nutrients. Recycling of fly ash in Australia will be further expanded because of its low trace element contents that can be toxic to plants and low radioactive element contents existing within soil background concentrations. The characteristics of coal combustion products are related to the characteristics of the coal used for combustion, and since Korea imports coal from Australia, Korean coal combustion products also can be recycled for various purposes.