• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.153-153
• /
• 2005

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2335-2341
• /
• 1999

The $2\times32$ coupler consists of Mach-Zehnder interferometer and Y branch coupler. For the designs of this coupler, three dimensional rectangular core waveguide decomposed to two-dimensional structure by the effective index method. To optimize the waveguide structure, the confinement factor was investigated with two-dimensional finite difference Beam Propagation Method. The $2\times32$ coupler fabricated by simulation with height between Mach-Zehnder arms, H=$43.6\mu\textrm{m}$(path difference $0.668\mu\textrm{m}$) was showed best characteristics. In the results of dry etching of core layer, the etching rate of core layer was above 2600${\AA}$/min, the etching ratio of SiO2 to Al mask was 30:1 and the uniformity of etching was $\pm$5%. The maximum insertion loss and the uniformity of $2\times32$ coupler were below 19.2dB, 2dB respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.867-871
• /
• 2012

In this paper, we proposed and demonstrated a low loss $1{\times}4$ type plastic optical fiber(POF) coupler incorporating a polymer tapering waveguide region. To avoid leakage loss at the interfaces between the POF and the polymer waveguide, we employed two POF transition regions, in which the cross section of the POF is adiabatically converted from a circular to a rectangular shape without change of its cross-section area. The device was fabricated based on a injection mold made of a silicon rubber. The fabricated POF coupler showed 1.33 dB of excess loss and 2.2 dB of flatness.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.170-171
• /
• 2003

광도파로는 변조기, 스위치, 필터, 센서, 파장변환기 등 많은 분야에 응용이 되고 있다. 이러한 광도파로의 손실측정방법에는 프리즘 커플러를 이용하는 방법, fabry-perot 구조의 물질이 갖는 pyroelectric effect를 이용한 방법, 도파로의 입출력 단에 fiber를 커플링하여 측정하는 방법 등을 들 수 있다. 그러나, 프리즘 커플러를 이용한 방법은 미세패턴의 도파로 측정이 어렵고, pyroelectric effect를 이용하는 방법은 특정한 방향으로 도파되는 광의 측정이 불가능하며, 마지막으로 fiber 커플링 방법은 항상 같은 조건하에서의 손실 측정이 어려운 단점이 있다. (중략)

• Electronics and Telecommunications Trends
• /
• v.8 no.3
• /
• pp.207-221
• /
• 1993

광 커플러는 광섬유로부터 광신호를 분기하거나 결합하는 광통신망의 가장 기초적인 부품으로 광통신망에서 다양한 기능을 수행하고 있다[1]. 따라서 광 커플러는 광통신망의 구성에 있어서 가장 중요한 부품의 하나이며, 특히 광가입자망의 구현에 따라 그 수요가 크게 증가될 전망이다. 현재 가장 일반적인 광 커플러는 Evanescent 광 결합원리를 이용하는 광섬유형 근접 커플러이며, 그 이외에도 각종 평면도파로를 이용한 도파로형 커플러가 제품의 소형화 및 양산성이 우수하여 많은 연구개발이 진행되고 있다. 본고에서는 현재까지의 각종 광 커플러의 기술 및 시장 현황을 통신용 단일모드 광 커플러를 중심으로 고찰하고 앞으로의 광 커플러 개발 방향을 제시하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.18-23
• /
• 2006

In this paper, we derive a novel eigenvalue equation of double silica layers on silicon only for TE mode and present the method as an example how to use it to determine the refractive indices and thicknesses with prism coupler. Our method to solve eigenvalue equation have good merit rather than [5] in that the equation is real and iteration parameters can be reduced from four to three. The average magnitude of the errors is less than $10^{-5}\~10^{-6}$ approximately

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.261-271
• /
• 2008

Holographic volume grating couplers (VGCs) are become increasingly attractive device for the application of optical interconnects because of their higher preferential coupling, dry fabrication processing, compact, and low cost. In this paper, the analysis, design, and implementation of the waveguide-imbedded input-output VGC with $45^{\circ}$ grating slant angle using holographic photopolymer(Dupont HRF600-20) for guided-wave optical interconnection applications, are presented. To show the usefulness of the proposed VGC, we fabricated the VGCs operating at 632.8nm and 1550nm wavelengths and its results are presented. The measured input coupling efficiency of the single VGC with $0.5{\mu}m$ grating period at 632.8nm wavelength is above 86.6% for TE-polarization. The input coupling efficiency of the $1\times2$ VGC with $0.73068{\mu}m$ grating period at 1550nm wavelength is about 90.8%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.156-161
• /
• 1998

We developed aerosol flame deposition method and made stress-free Pyrex-based optical waveguide on silicon substrate using this method. Zr is doped to control the refractive index of Pyrex waveguide layers. The refractive index of the film changes from 1.460 to 1.475 as the content of Zr changes from 0 to 3 wt%. Er is doped to see the possibility of applying this Pyrex waveguide as PLC-type (Planar Lightwave Circuit) optical amplifier. The refractive index of the film changes from 1.460 to 1.465 as the content of Zr changes from 0 to 1 wt%. Light launching using a prism coupler to the fabricated waveguide showed good quality for application to PLC. The polarization dependence of refractive-index of the Pyrex film is measured to be less than $2{\times}10^{-4}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6221-6226
• /
• 2015

In this paper, waveguide analysis was interpreted as an optical waveguide using the feedback perturbation method simple and easy to apply compared to the analysis method, while the other almost identical to the numerical calculation method. In addition, efficient coupling with an optical transmission line of optical fiber and the waveguide form the thin film of different functional elements is required in order to achieve the full optical communication system. However, problems arise, such as the light field (field) and the decrease of the access efficiency due to inconsistency in the distribution characteristics of the connection surface by the difference in size of the cross section thereof when connecting the optical fiber and the waveguide directly to the combination of a thin film. Therefore propose a new type of connector structure to increase the efficiency of the connection when connecting the optical fiber waveguide and the thin film was analyzed by applying a coupled mode theory, the binding efficiency of the modified contactor. And by diffusing Ti on the $LiNbO_3$ substrate and a wide range of applications in the manufacture of integrated optical material made of a current low-loss Ti: $LiNbO_3$ optical waveguide and making the Y-branch waveguide, and the properties were confirmed.