• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1995.10a
• /
• pp.790-793
• /
• 1995

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.04a
• /
• pp.231-234
• /
• 1991

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.496-502
• /
• 2007

In this paper, a slotted waveguide feeder for the electric field uniformity in multi-mode cavity is designed and fabricated. In case of the conventional feeder, a mode stirrer or a turntable is used for improving electric field uniformity in the multi-mode cavity. The proposed feeder has four slots, which have uniform radiation characteristic, on broad wall and shorted terminations at both ends. The electric field uniformity is simulated by CST's MWS(Microwave Studio) for the conventional and proposed feeders, respectively. The fabricated feeder shows the return loss of less than -20 dB at 2.45 GHz. To verify the validity of our proposal, the temperature distribution of the water samples in the multi- mode cavity is observed after a few minutes' heating. The proposed feeder is confirmed to have much better field uniformity in the multi-mode cavity than the conventional feeder.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.648-651
• /
• 2009

Using a mode-matching technique, a waveguide structure with multiple stubs which is utilized as the component of various communication systems has frequency filtering characteristics. We define a proper fitness function to automatically design the pass and stop bands of a waveguide structure with multiple stubs for frequency filtering and the genetic algorithm can be implemented with the fitness function proposed in this paper. The frequency filtering characteristics are numerically computed and parametric sweeps are also performed.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.543-546
• /
• 2008

A genetic algorithm is introduced to design a waveguide filter which is one of essential elements of satellite system. The waveguide filter composed of waveguide steps is analyzed based on the Green's function and mode-matching technique. Genetic optimization for a waveguide filter is performed in terms of each parameter. Insertion loss behaviors versus frequency are computed and compared with measurement results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.962-971
• /
• 2004

In this paper, we present the numerical analysis method for analyzing scattering characteristics of a rectangular waveguide with the conducting half cylinder using the mode matching method and compute scattering characteristics of a waveguide according to the rotation and changing radius of the half cylinder. Also, in conjunction with the generalized scattering method, the proposed method can be easily applied to a rectangular waveguide with cascade structure of conducting half cylinders. From the simulated result of a two pole filter, resonance frequency could be controlled by the rotation of half cylinders. The simulated result shows good agreement with the HFSS's result. The proposed structure and analysis method are easily applied to the design of waveguide components with conducting half cylinders.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.651-658
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Thus, each section of the designed waveguide transformer should be operated with evanescent mode over the whole design frequency band of the proposed microwave broadband power divider. This paper presents several simulations and experimental results of multi-section power divider to show validity of the proposed microwave broadband power divider configuration. Simulation and experiment show excellent performance of multi section power divider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1271-1281
• /
• 2000

본 논문에서는 모드 매칭법과 일반 산란계수법을 이용하여 경사진 금속봉이 도파란내에 놓여 있을 때 반사 특성과 투과 특성을 구하였으면, 이 결과를 이용하여 동축선로와 도파관과의 접합에 응용할 수 있도록 최적의 조건을 도출하였다. 여기서 반사특성은 기울기사 클수록 뚜렷아세 개선되어서 최소-40dB까지 감소하였고, 투과특성은 최적의 각도 45$^{\circ}$에서 최대의 특성을 얻을 수 있었다. 또한, 이를 HFSS의 결과와 비교하였을 때 잘일치하는 결과를 얻을 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.108-113
• /
• 2014

This paper presents the influence on the transmission characteristics of swelling in rectangular waveguides for Q-band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a swelling is calculated by using internal impedance in order to investigate the influence of swelling in the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.614-620
• /
• 1998

In this paper, we analyze theoritically the propagation and radiation characteristics for elliptical corrugated waveguides. The solutions of wave equations in an elliptic cylinder system are obtained in terms of Mathieu functions of 1st and 2nd kind. The electromagnetic fields in the elliptical corrugated waveguide can be represented by series and products of angular and radial Mathieu functions. By using impedence matching at the boundary between the inner region and the slot region, characteristic equations are derived. Then the characteristic equation is solved for $HE_{11}$ mode which is dominant mode in the elliptical corrugated waveguide and the fields in the aperture is calculated. And the propagation pattern for the elliptical corrugated waveguides is calculated through the field equivalence principle.