• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 1996년도 추계학술대회
• /
• pp.57-58
• /
• 1996

• 대한치과의사협회지
• /
• 제19권1호통권140호
• /
• pp.20-22
• /
• 1981

• 대한치과의사협회지
• /
• 제20권2호통권153호
• /
• pp.127-130
• /
• 1982

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.103-124
• /
• 1992

The purpose of this study was to investigate the effect on the fracture strength and color of ceramic by the design of the metal coping in ceramo metal crown. In this study, four types of ceramic crowns were made for fracture strength : standard ceramo metal crown, collariess ceramo metal crown, modified ceramo metal crown, and ceramic jacket crown. And three types of disk formed-specimens were made to compare the dentin shade owing to aluminous opaque powder and palladium alloy. Fracture strength was measured by universal testing machine(Instron Co. Ltd., U.S.A) and color was measured by color and color difference meter(Yasuda Seiki Seisakusho, Ltd., Japan). The results were as follows : 1. The fracture strength of ceramic was affected significantly by the design of metal coping in ceramo metal crown. The mean fracture strength(192.0 Kg) of standard ceramo metal crown was about 1.7 times higher than that(111.5 Kg) of collarless ceramo metal crown, and about 2.8 times higher than that(67.8 Kg) of ceramic jacket crown. 2. Modified ceramo metal crown that has metal band in the labio cervical had the lowest fracture strength. 3. Lightness, yellowness and redness of the dentin fired were decreased by the metal coping.

• 대한치과보철학회지
• /
• 제49권3호
• /
• pp.191-196
• /
• 2011

연구 목적: 본 연구는 여러 가지 금속-도재 합금의 도재결합강도를 측정하여 임상에 적용하는 것이 적절한지 평가하고자 하였다. 연구 재료 및 방법: 금속도재소부 전장관으로 가장 많이 사용되는 Ni-Cr 합금(Group 1)과 75% 금합금(Group 2) 및 최근 도재금 합금으로 판매되고 있는 52.5% (Group 3), 51.5% (Group 4), 32% (Group 5), 10% 금합금(Group 6)이 시편으로 제작되었다. 시편은 각각 5개씩 제작되었으며, 제작된 시편에 전용 도재를 소성하고 3점 굴곡 시험을 통하여 도재와 각 금속간의 결합강도를 측정하였다. 결과: Group 1의 도재 결합강도가 $40.62{\pm}3.32$ MPa로 다른 실험군의 도재결합 강도에 비해 통계학적으로 유의성 있게 가장 높은 결합강도를 보였고(P<.05), 다음으로 Group 2가 $37.47{\pm}1.57$ MPa, Group 3이 $35.85{\pm}1.48$ MPa, Group 4가 $35.04{\pm}1.34$ MPa, Group 5가 $33.17{\pm}1.62$ MPa, Group 6가 $30.75{\pm}1.21$ MPa 순으로 결합강도가 감소하였다. Group 2, 3, 4 의 도재결합 강도는 Group 6와 통계학적으로 유의성을 보여주고 있으나(Duncan's test, P<.05), Group 3과 4는 Group 5와 서로 유의한 차이를 보이지 않았다(Duncan's test, P>.05). 도재 결합 강도 차이는 금 함량이 높을수록 강도가 높았고, 모든 실험군에서 ISO 9693에서 제시하는 기준치(25 MPa)보다 높은 수치를 나타내었다. 결론: 실험에 포함된 모든 합금들이 임상적으로 사용 가능할 것으로 추정된다.

• 구강회복응용과학지
• /
• 제22권3호
• /
• pp.203-210
• /
• 2006

Although porcelain fused to metal crowns made from non-precious metal have good mechanical properties, they also have disadvantages such as the poor biological acceptability and the low corrosional resistance. Titanium is used as the alternative metal for porcelain fused to metal crowns, in spite of difficulties in casting. For that reason non-precious alloy including titanium which is easy to cast is currently used. This study evaluated the bond strength between non-precious alloy including titanium and Ni-Cr alloy. $Tilite^{(R)}V$ as non-precious alloy including titanium, $Rexilium^{(R)}V$ as Ni-Cr alloy and $Omega900^{(R)}$ and $Vintage(Regular)^{(R)}$ as porcelain powders were used. The results were as follows. 1. In comparison with the kind of alloy, the bond strength of $Tilite^{(R)}V$ was lower than that of $Rexilium^{(R)}V$. There was no significant difference between two groups. 2. In comparison with the kind of porcelain powder, the bond strength of $Omega900^{(R)}$ was higher than that of $Vintage(Regular)^{(R)}$ in $Tilite^{(R)}V$. There was significant difference between two groups(p < 0.05).

• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.706-718
• /
• 1997

Ceramometal crowns are common restorations in fixed prosthodontics because of their casting accuracy, the high strength properties of the metal, and the cosmetic appearance of porcelain. However, deterioration of the initial fit of the metal coping has been observed after the porcelain firing cycle. The distortion due to repeated firing makes it difficult to fit crown margin and elicits microleakage. The major causes of distortion are the residual stress that accumulate during wax-up, casting, cold work and the induced stress caused by the mismatch of porcelain-metal thermal contraction. This study examined the marginal fit changes of metal copings in relation to repeated firing and the effects of heat treatment that reduce the distortion resulted from residual stress. The marginal changes of the copings that were treated with conventional method and those treated with heat before repeated firing, were evaluated. The metal die which represented preparations of a maxillary central incisor was fabricated, and 45 wax patterns were cast with nonprecious metal alloys. The heat treatment of each group was performed as follows. Group 1(control) : Casting - Devesting - Cold work - Firing Group 2 : Casting - Heat treatment - Devesting - Cold work - Firing Group 3 : Casting - Devesting - Cold work - Reinvesting - Heat treatment - Devesting - Firing The copings were fired 3 times. After each firing, the marginal fit changes were measured with inverted metallurgical microscope at the 4 reference points located at labial, lingual, and both proximal surface. Measurements were compared, and statistically analyzed. The results were as follows ; 1. In all groups, the highest value of marginal fit changes of the copings studied were found after the first firing cycle. 2. When the distortion of each experimental group at the first firing cycle were compared, group 1 exhibited the greatest changes($20-27{\mu}m$), followed by group 2($9-13{\mu}m$), and group 3($8-10{\mu}m$). 3. The copings treated with heat before devesting(group 2) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 4. The copings treated with heat after reinvesting(group 3) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 5. No siginificant differences in marginal fit changes were found between the copings treated with heat before devesting(group 2) and the copings treated with heat after reinvesting(group 3). (p>0.01)

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.439-447
• /
• 2019

임플란트 식립 시 자연치와 임플란트 사이의 간격은 치주 조직 보존 및 심미에 중요한 요소이다. 또한 고정성 치아 수복 시 치아의 비정상적 위치 이동과 경사 이동은 의도적 근관치료를 필요로 할 수도 있고 저작효율에 불리하게 작용하기도 한다. 본 증례에서는 치열이 불균일하고 붕괴된 교합을 가진 환자에서 완전구강회복을 시행하기에 앞서 치아재배열을 위한 교정치료를 진행하였다. 환자는 통증이나 소리와 같은 측두하악관절장애 증상 및 불편감이 없으므로 교정치료를 진행하는 데 무리가 없었다. 임플란트 식립 전부터 시작한 교정치료를 임플란트 임시 보철물 시적 후에도 진행하였고 전치부 보호 및 심미를 위하여 교합고경을 전치부 기준 2 mm 거상하였다. 교정치료 완료 후 임플란트 및 자연치에 도재전장금관(Porcelain-fused-to-metal crown, PFM crown) 혹은 브릿지(bridge)로 최종 수복하였다. 환자의 치열 개선 및 무치악부 수복으로 기능적, 심미적으로 만족할 만한 결과를 보였다.