• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.68-75
• /
• 2008

This paper investigates the correlation between surface roughness and gloss of aluminium sheet painted waterborne paint. One customer criterion of automotive quality is the as-painted appearance of the final products. Especially, the current emphasis on control of surface roughness of sanded aluminium sheet has been prompted by the automotive industry's concern with the as-painted appearance. because the influence of such characteristics on paintability, and painted appearance is important in defining outer panel requirements for automobile. This paper is dedicated primarily to the issue of painted appearance and reviews for improvement of roughness. The conclusions are obtained as follows ; 1) Painted aluminium sheet appearance is strongly affected by surface roughness of base-metal and influenced by sand paper and sanding method. 2) The painted appearance of aluminium sheets was determined and related to surface roughness parameters, combination of sand paper.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.6
• /
• pp.541-545
• /
• 2008

Hypersensitivity pneumonitis (HP) is an immunologically-mediated disease resulting from repeated exposure to sensitizing agents, such as organic dusts or chemicals. Isocyanate is a volatile and highly reactive chemical that is extensively used in the manufacturing of automobiles, upholstery, and polyurethane foam. Occupational respiratory diseases associated with isocyanate, such as bronchial asthma, are well-known. It is thought that HP is one of the rare diseases induced by isocyanate with a very low frequency worldwide. We report a case of HP in an automobile painting sprayer which appeared to be associated with isocyanate.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.129-135
• /
• 2013

To recover of volatile organic compounds (VOCs) induced by painting process, we prepared separation system using hollow fiber membrane modules and evaluated the recovery performance of VOCs with different feed pressure and operating time. Concentration of volatile organic compound in permeate through the membrane increased with increasing operating time and pressure. Performance of the membrane for removing the VOCs when we applied 2-stage process showed better performance than that of single stage process.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.373-382
• /
• 2016

Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1385-1391
• /
• 2012

The authenticity of a document is recognized only when sealing on the document can be recognized to be the same as the original seal of a person who drew up the document. But forge in various ways is prevalent; forge through stamp-copy, forge through photocopying, forge through computer seal sculpture machine, forge through photosensitive resin, etc. Among the methods above, a method of making a forged seal with photosensitive resin panels, which is one of the easiest forging methods, enables making a forged seal the same as the original seal through the work of projecting ultraviolet rays on a resin panel on which negative film is stuck after making it using the original seal. But as research into this reality has not been sufficiently carried on, it is difficult to identify forged sealing through photosensitive resin seals, indeed. For this reason, unless regulations about making forged seals using resin machine for print are enforced, crimes related to forged seals using photosensitive resin are expected to increase in the future. Thus, after stamping 10 resin seals made based on an original seal carved of thick and thin strokes of characters, this paper intends to clarify that there are differences between original sealing and forged sealing through sealing identification method. Consequently, we verified the significant difference in the statistics between original sealing and forged sealing.

• 월간산업보건
• /
• s.212
• /
• pp.4-8
• /
• 2005

• Fire Protection Technology
• /
• s.39
• /
• pp.18-26
• /
• 2005

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.110-116
• /
• 2013

A concrete structure has become bigger and higher because of development of construction technology and a change in construction environment. Also it tends to focus on repairing, reinforcement and exterior in harmony with environment for structure maintenance and performance improvement. The research is about eco friendly durable painting applicable to concrete structure using civil and architecture. it purpose to improve external beauties and durable problems due to flexibility by variation of temperature, adhesion of exterior wall, crack and delamination in existing organic and mineral painting. For those problems, we made a eco friendly pre-paint that is made with preliminary treatment mixture as a highly enriched waterproof agent and adhesive increasing agent in preprocessing mixture. Then we performed an experiment on durability of prevention neutralization of concrete, durability abrasion, hiding power, adhesion, temperature resistance and resistance to chemical attack. The result of an experiment shows that hiding power is over 0.96 in standard test, durability abrasion test got higher value 1mg than water paint 75mg and tensile strength is 6 times higher than standard waterproof specification.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.357-364
• /
• 2004

합금화용융아연도금강판(GA)은 가격이 저렴하고 내식성 및 용접성이 우수하여 최근 자동차용강판으로 그 사용량이 급격하게 증가하고 있으나 도금밀착성이 나쁘고 프레스성형이 떨어지는 단점을 가지고 있다. 본 연구에서는 GA 도금층에 여러가지 유,무기계 윤활처리를 실시하여 이것이 마찰특성은 물론 용접성, 도장성 및 내식성에 미치는 영향을 평가하였다. 유기계 윤활피막은 가공성과 도금 밀착성에서 유리하나 용접성과 탈지성에서는 불리하였고, 무기계 윤활피막인 Prephosphate 및 금속윤활처리 강판은 가공성에서는 유기윤활피막 보다 약간 떨어지나 용접성과 탈지성에서는 우수한 결과를 나타냈다.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.583-590
• /
• 2008

Blasting has been applied in newly-built steel structures for cleaning forged surfaces and increasing the adhesive property of applied painting systems. However, the effect of the blast cleaning on fatigue behavior of welded joints is not clear. In this paper, fatigue tests were carried out on out-of-plane gusset welded joints and the effect of the blast cleaning on the fatigue behavior was studied. The curvature radius at the weld toe of the surface-treated specimens by using the blast method is larger than that of as-welded specimens. By the blast cleaning compressive residual stresses were induced into weld toes. The experimental results showed that the fatigue life of surface-treated specimens is longer than that of as-welded specimens, even though the fatigue life of surface-treated specimens and that of as-welded specimens are not clearly different in the high stress range. About a 160% increase in fatigue limit could be realized by using blast cleaning.