• Electronics and Telecommunications Trends
• /
• v.3 no.3
• /
• pp.64-75
• /
• 1988

본 고에서는 점차 고기능화 고속화되고 있는 모뎀의 기술동향을 분석하고 고속모뎀에 필요한 여러가지 복잡한 기능들이 하나의 칩으로 구현되고 있는 모뎀용 IC의 기술개발동향을 파악하고자 하였다.

• Environmental engineer
• /
• v.23 s.233
• /
• pp.76-77
• /
• 2006

비가오는 날 특장차량 정비업체 소속 재해자가 우천으로 인해 신체 등이 젖은 상태에서 옥외작업장에서 차량 도장작업을 하기 위해 차량 적재함 문짝 하단을 핸드그라인더로 연마작업을 하던 중 핸드그라인더 누전에 의해 감전 사망한 재해임.

• Environmental engineer
• /
• v.18 s.191
• /
• pp.74-76
• /
• 2002

우리 환경인들의 삶의 터전인 현장에는 많은 유해$\cdot$위험요인들이 상존하고 있으나 이를 간과하거나 무시하고 지나쳐버림으로써 돌이킬 수 없는 중대재해가 빈번히 발생하고 있습니다. 이에 본지는 최근 발생된 환경오염방지시설 또는 생산공정 현장에서의 재해사례를 알려드림으로써 발생가능한 재해를 사전예방하고 회원 여러분들의 소중한 생명을 보호코자 합니다.

• Composites Research
• /
• v.22 no.4
• /
• pp.13-19
• /
• 2009

Adhesive joints are widely used for structural joining applications in various fields and environmental conditions. Polyurethane adhesive is using for LNG carrier with cryogenic temperature condition. Even if similar polyurethane adhesive is used for different substrate, it shows different adhesion properties. Specially, variation of adhesion properties depending on the resin system or fiber is very important factor for selection of adhesive on industrial application. In present study, we got different peel strength according to the different test temperature when different polyurethane adhesive was used for same fiber reinforced composite. The main cause was investigated using by SEM and it was proven that the different adhesion property between glass fiber on composite surface and polyurethane adhesives at cryogenic temperature.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.567-573
• /
• 2016

GMAW and GTAW processes have been used for welding of equipment mounting pads during decades. For improving the mobility and survivability of KWV(Korean Wheeled Vehicle), various types of equipment are required and numbers of pads for welding were increased. In this research, for improving productivity of mounting pads welding process, new technology of stud welding was studied. In this study, mechanical properties of stud weldment were investigated to compare with those of GMAW weldment. Also, research of stud weldment durability was carried out and proved its fatigue strength under the condition of KWV's 32,000 km load profile.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.63-64
• /
• 2001

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.579-587
• /
• 2003

A lot of VOCs that is noxious ate exhausted at drying process of enamel coating device. This VOC gas can be incinerated perfectly through catalytic combustion, and heat that is occurred in incineration process ran be again used in drying process. By using VU catalytic combustion technology, in this study, we developed a enamel coating machine that have an excellent environment improvement and energy saying effect. As basic research for this development characteristics ana performance of catalytic combustion for VOC gas was evaluated and numerical analysis for drying oven was calculated. According to the result, VOCs combustion characteristics of metal form catalysis was excellent in high temperature, and it was seen that enamel coating machine should be designed as a precious controllable structure of recirculating supply rate and suction rate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.266-267
• /
• 2012

아연계 합금도금강판은 내식성이 향상되는 반면 아연 이외의 원소 성분에 의해 고온다습에서 변색되기 쉽기 때문에 이를 억제하기 위한 후처리 기술이 필요하다. 또한, 아연계 합금도금 강판이 자동차 부품으로 적용되기 위해서는 변색 억제를 위해 처리한 후처리제가 쉽게 제거되어 인산염처리 공정에서 도금 표면에 인산염결정이 용이하게 형성되어야 한다. 본 연구에서는 건식공정으로 제작된 아연계 합금도금 강판에 우레탄계 알칼리 후처리제를 도포하고, 고온다습 환경에서의 변색 억제 특성과 적정 부착량에서의 인산염처리 및 전착도장 특성에 대해 평가하였다. 두 형태의 후처리제는 건식 아연계 합금도금 강판에 도포 직후 표면에 간섭색을 나타내었으며, 첨가제를 통해 간섭색 제어가 가능하였다. 또한, 두 형태의 후처리제 모두가 고온다습 환경에서 무처리 강판에 비교하여 월등히 우수한 변색 억제 효과를 보였으며, 인산염처리 및 전착도장이 양호하게 얻어지는 것을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.487-493
• /
• 2020

Recently, the ministry of environment banned the use of the existing airless method using the spray in painting industrial facilities. Therefore, it is necessary to develop a pressure-roller attached to existing airless painting systems. The hole design of the SUS piping and drum-bases of pressure-rollers currently developed and sold have not been studied in detail, so their efficiency is questionable. In particular, if sufficient paint is not supplied to both ends of the roller, it is necessary to rework with a brush after painting. Therefore, the holes of the drum base need to be distributed so that the paint can flow to both ends of the roller. In this study, numerical analysis was performed to determine the effects of the hole design in the SUS piping and drum-base on the flow patterns of the paint and to suggest more efficient design measures. The analysis results showed that the uniform placement of the holes in the SUS piping is good for the balanced inflow of the paint. For the drum-base, the paint can flow better into both ends of the roller when the holes are concentrated and machined on both ends of the drum-base.

• Electronics and Telecommunications Trends
• /
• v.22 no.4 s.106
• /
• pp.109-117
• /
• 2007

e-Manufacturing을 위한 가상현실 기술은 급격하게 변화하고, 시장에서의 경쟁력 확보가 절실한 제조업에서 정보기술(IT)을 접목하여 제품의 시장 출시 기간 단축 및 개발 비용의 획기적인 절감을 실현하는 것이다. 본 글에서는 e-Manufacturing의 개요, 필요성, 가상현실 기술과의 연관관계, 구성요소를 소개하고, 각 구성요소인 PLM, CAD, CAE을 가상현실 기술과 관련하여 개요 및 기술동향을 제시하고자 한다. 또한, 이를 적용한 연구 사례로 한국전자통신연구원 디지털콘텐츠연구단에서 개발한 “선박 도장 훈련 시뮬레이션”과 “설계 검증용 상용 CAD 지원 렌더링 클러스터” 기술을 소개한다.