• Title/Summary/Keyword: 도로 모니터링

Search Result 1,491, Processing Time 0.031 seconds

VTSO 관점에서의 선박 충돌위험도 평가모델(CoRi)를 이용한 소형선박의 충돌위험도 평가·분석

  • Lee, Jin-Seok;Kim, Myeong-Hak;Song, Jae-Uk
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.05a
    • /
    • pp.284-285
    • /
    • 2018
  • 본 연구에서는 VTSO 관점에서 선박 충돌위험도 평가모델(CoRi)을 이용하여 부산항 관제구역내에서 발생한 일반 상선간 준사고 사례에 대한 충돌 위험도와 선종과 선박의 크기를 소형선박(유선 도선 어선 등)으로 가정할 경우 계산된 충돌 위험도를 비교함으로써 VTSO가 일반 상선과 다른 운항 특성을 가진 소형선박의 모니터링 및 충돌 위험 판단의 어려움을 수치적으로 분석 연구고자 한다.

  • PDF

A Suggested Method for Predicting Permeability of Porous Sandstone Using Porosity and Drying Rate (공극률과 건조율을 이용한 다공질 사암의 투과도 추정방법 제안)

  • Ko, Eunji;Kim, Jinhoo
    • Geophysics and Geophysical Exploration
    • /
    • v.17 no.3
    • /
    • pp.121-128
    • /
    • 2014
  • As the permeability is an important parameter to characterize the ease with which a porous medium transmits fluids, it is usually obtained by fluid flow experiment using core samples. In order to measure the permeability, however, an experimental apparatus is required and it might take long measurement time, especially for tight samples. In this study, the relationship between permeability and porosity as well as drying rate has been investigated to predict the permeability without a series of measuring experiments. Porosity is measured by drying monitoring method, which measures weight variation continuously while drying surface-dried saturated sample, and drying rate is obtained from weight variation ratio with respect to the water saturation. The total of 6 Berea sandstone samples, which have a permeability range of 70 to 670 mD, were used in this work, and a new and empirical equation which could predict permeability of porous sandstone by using porosity and drying rate were obtained through regression analysis.

An Effectiveness Analysis of Commercial Vehicle's Loading Pattern and Prevention of Overloading with On-board Truck Weight Sensors (화물차량 부착 중량센서 적용을 통한 운행패턴 및 과적 예방 효과 분석)

  • Kim, Jong Woo;Jho, Youn Beom;Jung, Young Woo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.17 no.6
    • /
    • pp.153-172
    • /
    • 2018
  • Overloading of Commercial vehicles have been an important area of transportation as one of the main causes of pavement damage, bridge collapse, severe traffic accident, etc. In this study, we analyzed the effects of overweight prevention by analyzing overweight driving patterns and using weight sensors. First, we analyzed relevant literatures of overweight and surveyed the commercial weight sensors. Then we chose the typical type of overweight vehicles based of overweight enforcement data analysis. MEMs inclinometer weight sensor were installed to 10 test vehicles and data was collected by weight sensors and gps in real time. As a result of gross vehicle weight and axle weight analysis, it was found weight sensor could decrease overweight rate. However, since the number of samples of test vehicles is insufficient to represent the whole commercial vehicle, further studies are deemed possible through the extension test.

Development of MEMS Sensor-based High Resolution Tilt Monitoring System (MEMS 센서 기반 고정밀 기울기 모니터링 시스템 설계)

  • Son, Young-Dal;Eun, Chang-Soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.11
    • /
    • pp.1364-1370
    • /
    • 2019
  • Tilt sensors are mainly used to measure the collapse of structures such as buildings, bridges and tunnels. Recently, due to the ease of use and low price, many tilt sensors using MEMS sensors have been used, but the measurement angle range is limited, and thus, they do not have high precision for 360 degree. This is due to the inherent offset and scale errors of MEMS sensors. In this paper, we proposed an algorithm for the calculation of precision angles to reduce the mechanical error of MEMS sensors, and produced a MEMS sensor module and a transmission module to compare the angle accuracy of sensor modules before calibration and the angle measurement accuracy after calibration. Experimental results show that the proposed technique has a precision of ± 0.015 degrees for all 360-degree.

Agricultural Drought Assessment Based on Evaporative Stress Index (ESI) Calculation using MODIS Satellite Image and ROC Analysis (MODIS 위성영상 기반 ESI 산정 및 ROC 분석을 활용한 농업가뭄평가)

  • Yoon, Dong-Hyun;Nam, Won-Ho;Lee, Hee-Jin;Park, Jong-Hwan;Kim, Dae-Eui
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.156-156
    • /
    • 2020
  • 가뭄은 다른 자연재해에 비해 진행 속도가 느리고 발생 시작 시기가 명확하지 않다. 또한 피해지역이 광범위하다는 점에서 사회, 경제적 피해와 농업 생산 시스템 및 수확량 등 농업 전반에 걸쳐 직접적인 영향을 미치고 있다. 전지구적 기후변화로 인해 국내의 가뭄 발생빈도는 2000년 이후 증가하고 있으며, 가뭄의 정량적 분석은 선제적 가뭄 대응을 위해 필요하다. 현재 국내에서는 여러 유관기관에서 지상 관측 데이터를 활용하여 가뭄을 모니터링하고, 가뭄 공간 분포 지도를 제공하고 있다. 하지만 지상 관측 데이터를 통한 가뭄 분포 지도는 미계측 지역에 대한 데이터 취득이 어렵고, 지형학적 특성을 고려하지 못하는 한계점이 있다. 이러한 한계점을 보완하기 위해 수자원 및 재해 분야에서 위성영상이 활용되고 있다. 위성영상을 활용한 가뭄 판단 및 예측에는 정규식생지수 (Normalized Difference Vegetation Index, NDVI)가 사용되고 있으며, 식생지수는 가뭄 발생, 진행 등에 있어 즉각적인 반응이 어렵다는 단점이 있다. 본 연구에서는 잠재 증발산과 실제 증발산의 비를 이용해 산정된 위성영상 기반 가뭄 지수인 Evaporative Stress Index (ESI)를 활용하였다. NASA (National Aeronautics and Space Administration)에서 제공하는 ESI는 전지구를 대상으로 5km 해상도로 제공하고 있다. 하지만 국내 가뭄 판단을 위해서는 높은 해상도의 영상이 필요하며, 본 연구에서는 MODIS (Moderate Resolution Imaging Spectroradiometer) 영상을 활용한 ESI의 산정을 통해 해상도의 문제를 개선하고자 한다. 산정한 500m 해상도의 ESI는 기존 5km 해상도의 ESI와 비교 검증하였으며, SPI 및 과거 가뭄 발생 현황 자료를 근거로 ROC (Receiver Operating Characteristics) 분석을 통해 시군 단위 농업가뭄평가의 적용성을 확인하고 한다.

  • PDF

Evaluation of the Performance of Woodchip-filled Infiltration Trench Treating Stormwater from Highway (고속도로 강우유출수 처리를 위한 우드칩 충진 침투도랑의 성능평가)

  • Park, Kisoo;Kang, Heeman;Kim, Youngchul
    • Journal of Wetlands Research
    • /
    • v.18 no.2
    • /
    • pp.183-193
    • /
    • 2016
  • In this study, design and performance of infiltration trench using woodchip as media for treating stormwater from highway were examined through field monitoring. Average reduction efficiency for TSS, COD, BOD, TN, and TP was 88%, 94%, 85%, 80%, and 75% respectively, which is similar to values reported by other studies and design manuals even though direct comparison is not possible due to different monitoring and design conditions. Mean field infiltration rate estimated by measuring the change of water depth inside the observation well was about 40mm/hr, and the time taken for complete infiltration was about 0.83days, which corresponds well with design criteria recommended by MOE guidelines in Korea. In addition, according to analysis of infiltration rate and reduction efficiency, effective rainfall depth applied for determining water quality volume(WQv), 5mm was found to be properly established as design criteria. Woodchip must be considered and included as an alternative media together with crushed rock and gravel into the design guidelines because it has more advantages in terms of weight, porosity, cost, and easiness of management than other media materials.

HyperSAS Data for Polar Ocean Environments Observation and Ocean Color Validation (극지 해양환경 관측 및 고위도 해색 검보정을 위한 초분광 HyperSAS 자료구축)

  • Lee, Sungjae;Kim, Hyun-cheol
    • Korean Journal of Remote Sensing
    • /
    • v.34 no.6_2
    • /
    • pp.1203-1213
    • /
    • 2018
  • In Arctic and Antarctic ocean, remote sensing is the most effective observation for environmental changes due to the inaccessibility of the regions. Even though satellite, UAV (Unmanned Aerial Vehical) are well known remote sensing platforms, and research vessel also used for automatic measurement on the regions, varied environment of Polar regions require time series and wide coverage of data. Especially, in high latitude, apply an optical satellite remote sensing is not easy due to low sun altitude. In this paper, we introduce an operation of hyper-spectrometer (HyperSAS/Satlantic inc.) which is mounted on Ice Breaker Research Vessel ARAON of Korea Polar Research Institute since 2010, to acquire an above water reflectance atomatically through every research cruise on Arctic and Antarctic ocean and transit both regions. In addition to, auxiliary data for the remotely acquired data, in situ water sampling were also obtained. The above water reflectance and in situ water sampling data are continuously acquired since 2010 will contribute to improve an Ocean Color algorithm in the high latitude and help to understand ocean reflectances over from high latitude through low latitude. Preliminary result from above water reflectance showed characteristics of Arctic ocean and Antarctic Ocean and used to develop algorithms for estimating various ocean factors such as chlorophyll and suspended sediment.

A Change of Vegetation at the Ecological Restoration Area of Simwon Valley in Jirisan National Park (지리산국립공원 심원계곡 생태경관 복원공사지역 식생 변화)

  • Jung, Tae-Jun;Kim, Yeon-Gyeong;Kim, Young-Jin;Jung, Myung-Hee;Park, Kyoung-Hee;Shin, Chang-Keun;Park, Seung-hong;Kim, Young-Sun
    • Korean Journal of Environment and Ecology
    • /
    • v.35 no.3
    • /
    • pp.294-304
    • /
    • 2021
  • This study aims to obtain basic data for systematic restoration by analyzing the monitoring results of the Shimwon Valley Ecological Landscape Restoration Project area in Jirisan National Park. In 2017, when the restoration project was completed, 12 monitoring plots and 4 control plots were installed for vegetation monitoring, and changes in the relative dominance, species diversity index and similarity between 2017 and 2020 were analyzed. The species diversity index of the surveyed areas where trees were planted during the restoration project was 0-1.4552, and the similarity index with the control group was 0% except for one survey area at 1.32%. The very low species diversity index and similarity index in the survey areas were attributed to the loss of trees planted during the restoration project due to death, damage by wild boars, or erosion by running water. On the other hand, the species diversity index was 0.9538-2.3222 in the monitoring plot where no tree was planted, and the similarity index was analyzed to be as high as 8.33%. It is necessary to continue the long-term monitoring for the development of ecological landscape restoration methods in the national park and analysis of the succession in monitoring plots where no trees were planted.

Characteristics of Non-Point Pollutants from Forest Landuse (산림 지역의 비점오염물질 유출 특성)

  • Kim, Ji-Yeon;Kim, Jee-Hyun;Jung, Min-Kyoung;Ji, Yong-Dea;Hwang, Jae-Yup;Park, Soo-Young;Yu, Jay-Jung;Kim, Tae-Seung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.287-287
    • /
    • 2011
  • 모니터링 자료의 부족으로 인하여 다양한 토지이용에서 발생하는 비점오염물질의 관리에 어려움을 겪고 있는 실정이다. 현재 환경부에서는 현행 토지계의 원단위를 세부적으로 분류하여 재산정하기 위하여 지목별로 장기 모니터링이 수행되고 있다. 특히, 산림 지역의 경우 도시 및 축산지역에 비하여 강우유출수의 농도는 낮더라도 유량적인 측면에 보았을 때 전체 수계에 대한 부하량 기여도는 매우 높다고 볼 수 있다. 따라서 본 연구는 장기모니터링의 일환으로 산림지역에 대한 비점오염물질 유출 특성을 파악하기 위하여 모니터링 및 분석을 실시하였으며, 이러한 결과는 향후 비점오염원 평가기반을 마련하고자 한다. 본 연구는 활엽수지역을 대상으로 2010년 4월부터 10월까지 총 16회에 걸쳐 모니터링이 수행되었으며, 시료의 성분 변화를 막기 위해 냉장기능이 있는 자동채수기를 이용하여 시료를 채취하였다. 수질분석항목은 BOD, COD, DOC, SS, T-N, $NO_3$-N, $NH_3$-N, T-P, $PO_4$-P로 총 9가지 항목을 분석하였다. 강우사상에 대한 모니터링 결과, 총강우량은 7.0~76.5mm, 강우지속시간은 1~30hr, 평균 강우강도는 0.88~18.50mm/hr의 범위를 보이고 있으며, EMC(Event Mean Concentration, 유량가중평균농도)결과 BOD는 0.4~2.4mg/L, T-N은 1.156~14.777mg/L, T-P는 0.009~0.562mg/L인 것으로 나타났으며, SS는 1.8~71.9mg/L 로 비교적 높은 값을 나타내는 것으로 분석되었다. 농도 변화 및 유출경향의 패턴을 볼 때, 유량이 증가함에 따라 농도도 점점 증가하여 첨두유량이 발생된 후 감소하는 경향을 나타내는 것으로 분석되었다. 또한 우리나라의 경우, 시험유역을 대개 산지 소유역에 설치하는 경우가 많아서 일반적으로 지연시간이 짧은 경우가 많기 때문에 이 지역 역시 강우가 내린 후 계류유출량의 증가에 영향을 주는 강우의 유출속도는 비교적 빠른 것으로 나타났다. 그리고 단기 수문곡선상에서 강우량이 많을 시 유출이 빠르게 일어나 첨두 유량에 도달하는 시간이 짧고, 강우량이 적을 시에는 첨두 유량의 출현시간이 늦어지는 것을 볼 수 있었다.

  • PDF

Hybrid Structural Health Monitoring of Steel Plate-Girder Bridges using Acceleration-Impedance Features (가속도-임피던스 특성을 이용한 강판형교의 하이브리드 구조건전성 모니터링)

  • Hong, Dong-Soo;Do, Han-Sung;Na, Won-Bae;Kim, Jeong-Tae
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.1A
    • /
    • pp.61-73
    • /
    • 2009
  • In this paper, hybrid health monitoring techniques using acceleration-impedance features are newly proposed to detect two damage-type in steel plate-girder bridges, which are girder's stiffness-loss and support perturbation. The hybrid techniques mainly consists of three sequential phases: 1) to alarm the occurrence of damage in global manner, 2) to classify the alarmed damage into subsystems of the structure, and 3) to estimate the classified damage in detail using methods suitable for the subsystems. In the first phase, the global occurrence of damage is alarmed by monitoring changes in acceleration features. In the second phase, the alarmed damage is classified into subsystems by recognizing patterns of impedance features. In the final phase, the location and the extent of damage are estimated by using modal strain energy-based damage index method and root mean square deviation (RMSD) method. The feasibility of the proposed hybrid technique is evaluated on a laboratory-scaled steel plate-girder bridge model for which hybrid acceleration-impedance signatures were measured for several damage scenarios. Also, the effect of temperature on the accuracy of the impedance-based damage monitoring results are experimentally examined from combined scenarios of support damage cases and temperature changes.