• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.417-426
• /
• 1998

This study was intended to investigate the characteristics of loads acting on the transmission of agricultural tractors during plowing, rotavating and transporting operations. A survey was conducted to determine working speeds and transmission gears most frequently used for each operations. The transmission loads were measured at the input shaft of the transmission gear box during each operations. Time histories of the measured torque loads were converted into a load spectrum and analyzed with respect to the S-N curve of the shaft material to estimate the partial damages on the transmission. Finally, comparison of the relative damages and severeness of each operation was presented and discussed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.53-59
• /
• 1999

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.48-53
• /
• 2005

Tire wear is one of the factors that most drivers have concerned and is closely related to the tire life. It is very difficult to predict tire wear because the factors affecting tire wear seem to be very comlicated. Tire wear test should be performed at real conditions for the evaluation of tire wear. In this study, we analyze tire wear according to the severities of test courses by using the dedicated test method, more severe than real driving conditions. In order to simplify the factors affecting tire wear, we define roads’ driving severities to be driving severity numbers, DSNs which are obtained by measuring the lateral accelerations of test courses. And we compared tire wear rates and profiles with DSNs. These test results can provide the tire design guide to meet tire wear performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.758-764
• /
• 2019

The chassis of the Korean light tactical vehicle adopts a frame-on-body structure that uses lightweight design technology in terms of equipment operating characteristics. Military vehicles are operated in much harsher conditions compared to civilian vehicles, including mountainous terrain, especially steep slopes. Due to this characteristic, frame-welded cracks were found on some military vehicles. Therefore, in this paper, road damage analysis was conducted by identifying various roads including the military unit's road. The result confirmed that the operating environment of some military units' tactical road was much harsher than the endurance road test condition. A solution was derived through defect analysis, design review, and actual vehicle driving test. This study can be used as a reference by suggesting the development direction for the durability test of a new vehicle.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.1 s.190
• /
• pp.37-46
• /
• 2007

The vibration environment essentially companied by vehicle operation on the ground is determined by the shape of road surface, which is called profile. This paper focuses on development of a profile and severity measurement system for unpaved test courses. In general, the profile and severity of unpaved road is an important issue in the reliability of endurance test. In order to measure unpaved road profile and severity, it is necessary to develop a profilometer system. The developed profilometer system is composed of data processing computer, power unit, air compressor and sensors(encoder, vertical gyro and laser displacement) This paper presents the measuring system configuration, measurement principle of road profile and analysis method of road characteristics used at CPG(Changwon Proving Ground) for this purpose.

• Journal of Biosystems Engineering
• /
• v.24 no.4
• /
• pp.293-300
• /
• 1999

The objectives of this study were to analyze the load acting on the transmission when tractor performed rotary operations in the poorly drained paddy fields and to compare its severeness with those obtained under different operational conditions. The loads were measured at the input shaft of the transmission and the load spectrum was constructed using the rain-flow cycle counting method. The severeness of the loads was represented by the partial damage sum which was determined by suing the modified Miner's rule. In the field with a shallow hardpan PTO speed affected severeness of the rotary operations greater than the forward speed did. In the field with deep hardpan, on the other hand, the effect of the forward speed was greater. the severeness in the well drained fields did not differ significantly from that in the field with a shallow hardpan. The severest load was recorded in the field with a deep hardpan.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.154-161
• /
• 1995

There are several kinds of driving conditions according to the characteristic of each vehicle diver. Automaker produces vehicle strong enough to satisfy this several driving conditions at the point of vehicle durability. In order to develop the car in a short period, Automaker engineer tests vehicle at serveral accelerated durability test roads. Before testing the vehicle durability, test engineer must know how much this test road severe than general field road which is composed of high way, city road, paved road and unpaved road. This paper suggests two types of road severity test method that is using relative fatigue life prediction method and using absolute fatigue life prediction method, and also present the merits and demerits of two test methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.73-79
• /
• 1998

For the design and development of the wheel type excavator, the dynamic effects of travelling on the performance of the equipment should be first analyzed and conside- red in the initial design stage. In order to test the durability of the equipment in a short period, th travelling test should be performed over accelerated durability test tracks. which is more severe than general field roads such as city road, paved road, unpaved road and rough road. In this paper, a parametric study is performed in order to determine important design parameters of durability test track of a wheel type excavator. A rigid body model is developed using DADS and dynamic analysis is performed for the equipment travelling over several test roads with different severity. A comparison of test and analysis results is also presented.

• Journal of ILASS-Korea
• /
• v.29 no.1
• /
• pp.16-22
• /
• 2024

The EU (European Union) was introduced Euro-6e in 2023. Recently, the EU prepare to introduce Euro-7. One of difference Euro-6e and Euro-7 is test route condition. This study developed 5 test routes that have different characteristics and severity. The severity of test routes was made by traffic and road gradient. And this study was conducted RDE test on 5 test routes for Light-Duty diesel vehicle (Euro-6d). Based on the test results, the emission characteristics of CO₂ and NOx were analyzed according to the severity of the test routes. Especially, 4 test routes were satisfied normal driving condition of Euro-7 and other test route was satisfied extended driving condition of Euro-7.

• Journal of Welding and Joining
• /
• v.8 no.4
• /
• pp.8-19
• /
• 1990

최근 항공우주산업, 원자력산업, 석유화학산업 등의 산업분야에 있어서는 각종 기기의 사용환경이 더욱 가혹하게 되고, 내열기능성이나 내식기능성이 특히 우수한 내열합금의 개발이 강하게 요구되고 있다. 이와 같은 요청에 대응하기 위해서 결정제어합금이나 입자분산강화합금, 섬유분산강화합금 등이 개발되고 있다. 내열합금을 사용하여 각종의 기기를 제조하는 경우에는 고성능, 고정도의 용접, 접합기술이 필요불가결하게 된다. 본 보고에서는 내열합금 중에서도 초내열합금에 초점을 두어 그 용접, 접합법으로서 주로 용접법과 확산접합법에 대한 최근의 연구동향에 대해서 기술한다.