• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.1
• /
• pp.23-27
• /
• 2016

This study investigates the effect of carbon fiber sheet (CFS) and carbon fiber strand sheet (CFSS) on the fatigue resistance and compressive strength of RC slabs. The results of a comparison of the number of equivalent cycles between the CFS- and CFSS-reinforced RC slab test specimens obtained from a fatigue test indicate that the CFSS-reinforced RC slab has 1.2~1.3 times greater effect of reinforcement than the CFS-reinforced RC slab. This study also indicates that the fatigue resistance of the CFS- and CFSS-reinforced RC slabs is ensured when the compressive strength of concrete is not lower than the specified design strength prescribed in the Specifications for Highway Bridges but is not ensured when the compressive strength of concrete is lower than the specified design strength, although the effect of reinforcement is secured.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.58-71
• /
• 2007

The disabled and elderly people have a wide variety of functional impairments. By disability and elderly user group definition, identification of users needs and specification of content requirements were studied. Existing technologies including location, navigation and information exchange devise and communication systems were analyzed to design proper integrated system for indoor and outdoor uses. There are two types of services considered in the project: assisted living services(ALS) including health and emergency needs and assisted mobility services(AMS) with transportation needs. To develop each content, content identification and requirements was studied through interviews and expert consultations. System requirements and specification using usecase technique for disabled and elderly people are discussed.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.645-650
• /
• 2004

As time passes, bridge structures require extension work on bridge in use from various effects such as social economical, or traffic environment change. When the concrete is poured at the connection of extension work initial curing concrete is influenced by vibration of vehicles that are passing through the old bridge superstructure. Concrete at early curing stage in construction site should be properly protected, enough to have established sufficient integrity to withstand outside vibration, impact etc. Currently there is no standard specification or regulation in our country. In this paper, experimental variables were divided by vibration velocity and time of loading, and concrete compressive strength and bond strength were measured.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1351-1355
• /
• 2009

과거에 발생한 극한홍수기록을 역사기록에서 확인하고, 재해석하는 것은 근대적 관측기록에 100년 내외의 극한홍수 자료 기간을 획기적으로 확장할 수 있으며, 장기간의 정성적, 정량적 극한홍수기록으로부터 극한홍수의 발생 경향을 파악할 수 있고, 설계에도 반영하여 극한홍수에 안전한 기준을 작성할 수 있다. 본 연구에서는 극한홍수의 변화특성을 분석하기 위해 청계천 유역에 대한 극한홍수 사례분석을 수행하고자 하였다. 즉, 유역홍수유출모형 및 하천수리모형을 활용하여 청계천에서 발생한 과거 극한홍수를 평가하고 역사기록을 활용하여 공간적으로 해석하고자 하였다. 이를 위하여 과거 청계천 유역의 토지이용 현황을 역사문헌자료를 이용하여 구축하였다. 과거 청계천의 토지이용은 산림, 주거지역, 하천, 도로, 공원 및 녹지 등 총 5개로 분류하였다. 과거 청계천의 극한홍수량 산정은 HEC-HMS를 이용하였으며 사용된 강우자료는 과거 측우기 우량 중 최대강우량인 1885년 7월 16일의 392 mm와 200 mm를 넘는 최저강우량인 1828년 7월 4일의 202 mm를 이용하였다. 또한, HEC-RAS를 이용하여 최하류인 오간수문에서 최상류인 송기교까지의 본류구간에 대하여 과거 청계천 유역의 홍수량에 따른 홍수위를 계산하였다. 모형의 입력자료로는 하도구간 및 하천단면, 조도계수, 경사, 상 하류단 경계조건 등이 필요하다. 본 연구에서는 청계천 개수계획평면종단도(1936년, 경성부), 준천사실(1760년), 동국여지비고(1870년), 조선지형도집성(1921), 청계천 유물 발굴조사보고서(2006)의 상세 하도 구간 자료 및 종단도 자료를 이용하여 모의 분석하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.423-426
• /
• 2002

The foundation for developing a cost estimation system based on historical data has been being prepared in Korea. Historical data is a priori of developing a cost estimation model. Cost Index, one of the historical data, is used to estimate construction cost and to adjust the amount of contract money in the foreign country, whereas it is not used in domestic except for the road construction project in Korea. Construction cost indices can be used by an estimator in tender analysis, pricing, price adjustment, cost planning, and forecasting. In this regards, this paper identified the problems in developing Cost Index evaluation process by comparing the standard of framing Cost Index used in British to the one used in Korea. Then, the scheme for improving a Cost Index required for Site Developing Construction was proposed. Twenty-two cases of engineering estimate data were used to compare the domestic standard to the foreign one in deriving a Cost Index.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.775-784
• /
• 2005

In this research, major design factors have been evaluated for the establishment of the rational seismic design code of circular RC(reinforced concrete) bridge pier Previous experimental researches have drawn a conclusion that transverse confinement reinforcements have been excessively used for RC bridge piers in Korea. Thus, the objective of this study is to propose a rational design equation for transverse reinforcements of RC bridge piers in Korea which would be classified as a low or moderate seismic region. Newly proposed equation further considers the effect of the axial force ratio and the longitudinal steel ratio. Minimum transverse confinement steel ratio is also proposed to avoid probable buckling of the longitudinal reinforcing steels subjected to relatively low axial force. It is thought that these new codes seem to alleviate the rebar congestion in the plastic hinge region of RC bridge piers which contribute to the enhancement of constructibility and economization for RC bridge construction.

• Archives of design research
• /
• v.16 no.2
• /
• pp.209-218
• /
• 2003

The increase of wheelchair users due to the rapid growth of elderly population, traffic accidents, and industrial disaster etc. becomes a major issue in our society. Thus, the Convenience Promotion Law was enforced to facilitate the use and installation of convenient facilities for the disabled, the elderly and pregnant women. Currently, not only newly built buildings but also roads and parks are accessed and used by all the people without any hindrance. In contrast to this, so far not many studies on residential space design for wheelchair users have been carried out except for public facilities. So, wheelchair users have to bear the inconvenience in their houses made upon the standards of the general people. Therefore, it is necessary to develop design guideline considering the physical characteristics of wheelchair users and their family members to lead a convenient life. This study was conducted in universal design perspective and intended to establish design guideline of convenient residential space for wheelchair users and general people. To accomplish the objective, surveys for wheelchair users' actual conditions and needs, and video observation were carried out.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.225-231
• /
• 2017

This study was carried out for the production of aerial work machinery in high place in the orchard. In the case of orchards, there are many unpaved roads and sloping grounds to solve the problem of overturning or safety problems when working in a orchard. For more stable operation, an automatic leveling system was designed. During the structural analysis, the horizontal sensor was installed in addition to the standard that we wanted. Based on the INVENTOR, the structural analysis through 3D modeling showed that the maximum tilt of the worker was 116.49Mpa on the left and 118.26Mpa on the right.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.182-182
• /
• 2011

현재 국내에서 PSC 거더의 제작은 주로 포스트텐션방식을 사용하고 있다. 포스트텐션방식은 콘크리트 양생 후 긴장력을 도입하여 제작회전율이 높은 특성을 가지나 쉬스, 그라우팅, 정착장치 등이 요구되어 조립과정이 복잡하고 제작단가가 높다. 교량에 적용되는 PSC 거더를 포스트텐션방식 대신에 프리텐션방식으로 제작한다면 제작단가를 대폭 감소시킬 수 있을 것이나, 교량용 PSC 거더의 길이가 일반적으로 30~50m이므로 공장에서 제작하여 현장으로 운반하는 것은 운반비용의 상승 및 운반 가능한 크기의 제한을 받게 된다. 운반의 문제를 해결하기 위해서는 현장에서 PSC 거더를 제작하여야 하는데 현장에 긴장대를 고정식으로 설치하는 것은 제작단가의 상승으로 이어져 경제성을 잃게 된다. 따라서 현장에서 사용할 수 있도록 이동식 긴장대를 제작한다면 경제성을 갖춘 프리텐션방식의 PSC 거더 생산이 가능할 것이다. 50m급 이동식 긴장대에는 약 10MN에 이르는 매우 큰 긴장력이 가해져 이동식 긴장대가 콘크리트 양생전까지 이 긴장력을 저항하여야 한다. 본 논문에서는 유한요소 해석프로그램인 ABAQUS를 사용하여 50m급 PSC 거더를 생산할 수 있는 이동식 긴장대를 모델링하여 약 10MN에 이르는 긴장력이 가해질 때에 이동식 긴장대의 각 구성요소의 거동특성 및 하중에 대한 안전성 및 좌굴에 대한 안정성 확보 여부를 해석적으로 파악하고자 한다. 이동식 긴장대는 구성요소인 정착블럭(긴장BOX)과 중간연결블럭으로 나누어 모델링하였다. 정착블럭(긴장BOX)은 다수의 강판을 4절점 쉘요소(S4R)를 사용하여 직육면체의 BOX 형상에 내부를 보강한 단면으로 구성하였고, 중간연결블럭은 H형강 2개를 일체화한 긴장대 거더와 콘크리트 바닥판 블록이 볼트로 합성된 구조이며, H형강은 4절점 쉘요소(S4R), 바닥판블럭은 8절점솔리드요소(C3D8R)를 사용하였다. 긴장대거더와 바닥판블럭은 합성거동을 하도록 weld option을 사용하여 부분적으로 결합하였다. 정적해석결과 이동식 긴장대에 발생하는 응력은 도로교 설계기준에 SS400 강재의 허용응력 140MPa 보다 작으며 선형탄성좌굴 해석결과 가력하중의 2.22배 약 21MN의 하중이 가력되어야 전체좌굴이 발생하게 될 것으로 추정된다. 해석결과를 보아 50m급 PSC 거더를 생산할 수 있는 이동식 긴장대는 하중에 대한 안전성 및 좌굴에 대한 안정성을 확보하고 있는 것으로 판단된다.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.1
• /
• pp.9-13
• /
• 2014

Nowadays, among several reasons for customers to choose their own cars, NVH performance plays much important role. The concern for the car interior noise is increasing recently, because electric cars and hybrid cars generate less engine noise which was the main noise of traditional cars. According to oversea references, high Lateral Dynamic Stiffness (LDS) of vehicle wheels is described to reduce Structure Bone Noise (SBN) which is being generated while driving cars. However availablet test standards and test results are not enough, in this study the interior noise has been measured after attaching a same tyre to several wheels which has different Lateral Dynamic Stiffness. The test has verified that the interior noise differs depending on Lateral Dynamic Stiffness of wheels. As to this, the reduction of the interior noise can be possible with the optimal design of the wheel.