• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.379-388
• /
• 2012

The Road Name Address system has begun to be applied and widely used since 2011. However, the Digital Map, or the national representative basic map, has no reference to the Road Name Address system. It causes some difficulties to use the Digital Map under the Road Name Address system. In this paper, we suggest a method for generating the expanded Digital Map by adding information about Road Name Address system into the objects of the Digital Map. First, object matching pairs between the road section layer from the Road Name Address Map and the road centerline layer from the Digital Map are found. Then attributes to be copied from the Road Name Address map to the Digital Map are extracted by comparing their attribute tables. Finally the extracted attributes are copied from the Road Name Address Map to the Digital Map. The expanded road centerline layer of the Digital Map then has attributes about road name according to the Road Name Address system, so that the georeferencing of the Digital Map according to the Road Name Address system becomes possible.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.293-299
• /
• 2022

Recently, various stakeholder are interested in microplastic to cause pollution of the marine's ecosystem and effort to conduct study of product's life cycle to reduce pollution of marine's ecosystem. The micorplastic refer to materials of the nano- to micro- sized units and it can be classified into primary and secondary. The primary microplastic mean the manufactured for use in the specific field such as the microbead of the cosmetic or cleanser. also, secondary mean the unintentionally generated during use of the product such as the textile crumb by the doing the laundry. Tire and Road Wear Particles(TRWPs) are also defined as secondary microplastic. Typically, TRWPs are created by friction between the tread compound's rubber of the tire and the surface of the road du ring the driving cars. Most of the generated TRWPs exist on the roadside and some of them were carried to marine by the rainwater. In this study, we perform the quantitative analysis of the TRWPs existed in fine dust at the roadside. So, we collected the dust from the roadside in Chungcheongnam-do's C site with a movement of 1,300 cars per the hour. The collected samples were separated according to size and density. And shape analysis was performed using the Scanning Electron Microscope(SEM). We were possible to discover a lot of TRWPs at the fine dust of the 100 ± 20 ㎛. And we analysis it u sing the Thermo Gravimetric Analysis(TGA) and Gas Chromatography/Mass Spectrometer(GC/MS) for the quantitative components from the tire. As a result, it was confirmed that TRWPs generated from the roadside fine dust were included the 0.21 %, and the tire and road components in the generated TRWPs consisted of the 3:7 ratio.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.123-132
• /
• 1998

This paper presents a road detection technique for spaceborne synthetic aperture radar (SAR) images. Roads are important cartographic features. We incorporate an active contour model called snake as a model for the road and define a new external energy for snake which is appropriate for the road. Detecting roads in spaceborne SAR images is very difficult without other information. In this paper, digital maps are utilized to obtain the initial position and shape for snake. Only approximate geodetic location of roads appearing in SAR images can be known through geocoding process and usual digital maps also have location errors. Therefore, there exist large location offsets between the two data. By introducing initial matching procedure, the errors are reduced significantly. Then we initialize the snake's shape using the roads extracted from digital map and minimize the energies of all snake points to detect roads. We outline two problems in detection and propose a method that mitigates them.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.46-55
• /
• 2020

The maintenance cost for highway pavement is gradually increasing due to the continuous increase in road extension as well as increase in the number of old routes that have passed the public period. As a result, there is a need for a method of minimizing costs through preventative grievance Preventive maintenance requires the establishment of a strategic plan through accurate prediction old Highway pavement. herefore, in this study, the XGBoost among machine learning classification-based models was used to develop a highway pavement damage prediction model. First, we solved the imbalanced data issue through data sampling, then developed a predictive model using the XGBoost. This predictive model was evaluated through performance indicators such as accuracy and F1 score. As a result, the over-sampling method showed the best performance result. On the other hand, the main variables affecting road damage were calculated in the order of the number of years of service, ESAL, and the number of days below the minimum temperature -2 degrees Celsius. If the performance of the prediction model is improved through more data accumulation and detailed data pre-processing in the future, it is expected that more accurate prediction of maintenance-required sections will be possible. In addition, it is expected to be used as important basic information for estimating the highway pavement maintenance budget in the future.

• Journal of Korean Society of Transportation
• /
• v.36 no.3
• /
• pp.216-228
• /
• 2018

In this study analyzed the ponding changing of plastic deformation section follwed time development to apply weather, geometry and traffic data in additon to time development to improve road management service and safety of roads during or after rain. After We selected an 8.3km section of old national highway the Seongnam-Janghowon section and created a three-demensional surface of terrain through the numerical transformantion of design drawing data, with reflection the linear data of the same coordinate system in order to describe more realistic roads, we design additional structures with shading above roads. The altitude and azimuth of the sun were calculated and set based on the longitude and latitude data of the survey line for the analysis of the sun rate, and the daylight impact zone was visualized by setting the shaded time to an interval of 1 hour and the shade rate of the corresponding section. In addition, the evaporation volume calculated from weather data such as temperature, humidity, radiant energy, and road temperature analyzes together, it will use the way of a safer and more efficient road management as grasping the ponding changing more efficent in time development.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.151-159
• /
• 2010

This paper presents a research result that was performed to develop a more accurate freeway crash prediction model than existing models. While the existing crash models only focus on developing crash relationships associated with highway geometric conditions found on a short section of a crash site, this research applies a different approach considering the upstream highway geometric conditions as well. Theoretically, crashes occur while motorists are in motion, and particularly at freeways vehicle speed at one specific point is very sensitive to upstream geometric conditions. Therefore, this is a reasonable approach. To form the analysis data base, this research gathers the geometric conditions of the West Seaside Freeway 269.3 km and six years crash data ranging 2003-2008 for these freeway sections. As a result, it is found that crashes fit well into Negative Binomial Distribution, and, based on the developed model, total number of crashes is inversely proportional to highway curve length and radius. Contrarily, crash occurrences are proportional to tangent length. This result is different from existing crash study results, and it seems to be resulted from this research assumption that a crash is influenced greatly by upstream geometric conditions. Also, this research provides the expected effects on crash occurrences of the length of downgrade sections, speed camera placements, and the on- and off- ramp presences. It is expected that this research result is useful for doing more reasonable highway designs and safety audit analysis, and applying the same research approach to national roads and other major roads in urban areas is recommended.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.105-114
• /
• 2019

Recently, the paradigm of road policy has been focused on user safety. Recently, the number of road facility improvement project has been continuously increased but the economic feasibility (B/C ratio) is insufficient. Therefore, it is necessary to select a reasonable road improvement project through accurate and objective analysis of the road safety evaluation. In this study, to develop a new road safety evaluation method, data were collected based on the current road safety evaluation method for 75 routes including national roads and provincial ones. Based on the collected data, problems were analyzed and utilized as the basic factors of the new road safety evaluation method. Therefore, in this study, traffic accidents were reflected as a general evaluation item by weighing to solve these problems, and the evaluation items were added from experiences and ideas of the local public officials. For each evaluation item, a reasonable weight was determined through AHP (Analytic Hierarchy Process) questionnaire evaluation with highway experts. In addition, the safety index was determined based on the evaluation criteria for each evaluation item. The criteria for evaluating the danger zone are determined by the overall safety index. Finally, the criteria for selection of road improvement projects based on the overall risk level were derived.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.568-571
• /
• 2007

본 연구에서는 차량검지시스템을 이용하여 메타데이터의 검지시스템의 하드웨어와 소프트웨어가 도로에 적합한 시스템이 되도록 실험을 통하여 이를 검증하고, 표준화를 위해 제안하였다. 첫째, 교통정보를 메타데이터하고자 할 때 그 구축범위가 너무 광범위한 점을 보완하여 시내 교통정보의 범위를 줄이고자 적용범위로 VDS(차량검지시스템 : Vehicle Detection System)의 메타데이터 구성요소에 대한 표준을 마련하였다. 둘째, 본 표준에서는 차량의 속도, 단위 시간당 차량의 통과수 및 점유시간 등을 조사할 수 있는 VDS의 메타데이터 구성요소를 추출하고 데이터 요소에 대한 정의 및 기술형식을 정의하였다. 셋째, VDS의 메타데이터 표준지정은 교통정보의 데이터 요소 및 형식을 동일하게 사용하도록 함으로써 상이한 개발업체에 의해 개발된 시스템의 교통정보를 일관성 있게 표현할 수 있다. 넷째, 본 표준은 VDS 메타데이터의 데이터 요소명을 표준화하기 위해서 Data Dictionary를 구축하여 실제 데이터 요소에서 data dictionary에서 정의된 약어들의 조합으로 표시하여 데이터 모델링시 유용하게 쓰일 수 있도록 하였다.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.635-638
• /
• 1999

도로 위에 설치된 카메라에서 검지 영역의 데이터를 입력받아 통과 차량수, 도로 점유율, 차량속도, 차간 거리 등의 교통정보를 실시간으로 산출하는 기법은 지능형 교통정보 시스템(ITS)의 핵심 분야이다. 본 논문에서는 검지영역의 시공간 영상 분석에 의해 다양한 기상 조건과 그림자 등의 환경의 변화에 민감하지 않은 교통정보 산출기법을 제안한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.275-278
• /
• 2002

본 논문에서는 한국의 전파환경을 도시 계획법에서 지정한 지역세분을 기초로 4개의 대분류와 8개로 소구분하여 Kor-231 모델을 제안하였다. 전파전파 특성을 측정하기 위해 슬라이딩 코릴레이션 기법을 이용한 대역확산 송${\cdot}$수신 방식으로 구현하여 수신전력, 평균 초과지연 그리고 RMS 지연확산을 가장 도시계획적으로 개발된 공업 지역과 주거지역에서 직선 도로에 마이크로셀을 배치하여 도로를 따라 진행하는 LOS와 건물들로 둘러쌓인 N-LOS에서 측정된 데이터를 분석하여 한국의 전파환경에서 잘 적용됨을 확인 하였다.