• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.71-78
• /
• 2010

Rapid urbanization causes a variety of transportation problems, including traffic delay. Then transportation engineers would get involved in trying to solve traffic delay through road constructed and uncongested policy. But lately, traffic policy changed from vehicle-dominated to humandominated and green transportation. Road diet is one of green transportation. Road diets reduce the number of lanes, lane width because supplement space for green transportation including a bicycle road, side-walk, etc. A study on road diets not enough then this study performed a basic study for road diets. This study on lane width reduce for road diets through analyzes sway of moving vehicle. This study results shows lane width of a compacts-size car needs 2.34~2.70m and lane width of a full-size car needs 2.62~2.89m. According to this study lane width can reduce therefore lane width design criterion have to be relieved. This study will be used in a road width reduce including a road diets, road in process of construction and so on.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.97-106
• /
• 2010

Environmental issues resulting from climate change and energy crises have become global issues, and cycling has gained greater popularity for sustainable transportation. Though many cities are trying to build bicycle roads, it is not easy to implement bicycle roads because there is little available space for bicycle facilities. Therefore, road diets have become more popular in Korea. However, there has been no intensive research to date of their impacts. The purpose of this research is to evaluate the effects of road diets and construction of bike lanes. Every benefit, including energy benefit, environmental benefit, and health benefit is considered, while only time savings benefit has been considered in previous studies. The benefit analysis for the Seoul metropolitan area as a case study shows that road diets have a (1) time saving benefit for only five percent of the mode share and (2) enough total benefit even if bicycle mode share is less than two percent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4005-4011
• /
• 2010

This study investigates the effect on automobile traffic flow of the bike lane configuration via the road diet implemented in Nam-Gu, Busan using the microscopic simulator TransModeler. The results show that the increases in average delay time and stopped time experienced by automobile vehicles after implementing the road diet during the peak period are significant, but those during the non-peak period are insignificant at alpha=0.1. The results in peak period are consistent with the results of the past studies, which concluded that a road diet can contribute to deteriorating the level of service when the automobile traffic flow rate on the existing roadway is relatively high. For the non-peak period, the analysis results may reflect the fact that the automobile traffic flow is not severly affected by the road diet due to the reserved capacity.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2011

In this study, estimated the minimum lane width for the curved section by analyzing of lateral sway distance and compared the lane width for result of this study and a precedent study for straight section on urban roads. Then suggested minimum lane width of road alignments and vehicle classes. The lane width of curved section that was investigated was 2.79m~3.40m. Analysis of frequency distribute and cumulative frequency distribution for lateral sway distance on the basis of 85% of the suggested vehicles. The result of study, minimum lane width for the curved section was 2.31m~2.58m in the case of small size car and 2.80m~3.27m in the case of large size car. Result of this study is judged that it is necessary to case for introduction of green transit, during road construction and construct a road for small size car. Expect result of this study can be used for the application of flexible design standard according the purpose of road designer.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.117-127
• /
• 2007

The exposed aggregate PCC(EAP) pavements have been successfully used in Europe and Japan as low-noise pavements. Coarse aggregate are exposed on the pavement surface texture of EAP by removing mortar of surface. The pavement surface texture should maintain not only low-noise characteristic but also adequate skid resistance level during the performance period. Skid resistance decreased with wearing and polishing of tire and pavement surface due to the repetition of tire-pavement contact. Since the tires mainly contact the exposed coarse aggregate, the shape and rock type of coarse aggregate significantly influence wearing and polishing of EAP pavements. The test for resistance to abrasion coarse aggregate by use of the Los Angeles machine(KS F 2508) and the method of test for resistance to abrasion coarse aggregate by use of the Accelerated Polishing Machine(ASTM D 3319-90) are generally used to evaluate polishing characteristics of aggregate. In this study, polishing of coarse aggregate of different five rock types were evaluated by KS F 2508(LA abrasion test) and ASTM D 3319-90(PSV method). The results of LA abrasion test and PSV method were contrary to each other. Since LA abrasion test is estimated the quantity of abrasion by the impact of aggregate, it may not be adequate to evaluate the polishing of aggregate by the repetition of tire. In the case of PSV method, the resistance of polishing is estimated the skid resistance variation of polished aggregate after repetition of tire. The PSV method is adequate for the evaluation on polishing of coarse aggregate. From the test results of PSV method, it was founded that rock type, specific gravity, coarse aggregate angularity, flat or elongated particles in coarse aggregate are significant to the resistance characteristic of coarse aggregate.