• 한국도로학회:학술대회논문집
• /
• 2003.10a
• /
• pp.319-325
• /
• 2003

• 한국도로학회:학술대회논문집
• /
• 2008.10a
• /
• pp.321-332
• /
• 2008

• 한국도로학회:학술대회논문집
• /
• 2008.10a
• /
• pp.513-517
• /
• 2008

• Geotechnical Engineering
• /
• v.35 no.5
• /
• pp.25-38
• /
• 2019

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.212-216
• /
• 2007

본 연구의 목적은 도시 지역에서 지진 발생시 중요한 대피로 역할을 하는 도로의 위험평가요소를 분석하고 데이터베이스(Database, DB)를 구축하는데 있다. 현재 우리나라는 도로의 체계적인 유지관리를 위해 도로관리통합시스템이 개발되어 있으나, 이는 도로대장전산화, 포장관리시스템, 교랑관리시스템, 도로절개면유지관리시스템 등에 한정되어 있다. 다시 말해서 재난 시 사람들이 신변의 안전을 확보할 수 있는 대피나 구급을 위한 통로로써의 도로에 대한 이해가 부족한 실정이다. 따라서 본 연구에서는 선행연구의 분석을 토대로 방재관점의 도로관리를 위한 항목들을 자연환경, 시회환경, 도로 및 시설물, 유발요인 등으로 제안하고, 서울대학교 부근을 대상지역으로 하여 이들 요인을 DB화하였다. 이는 도로와 주변 환경 등을 동시에 고려하여 재난 발생 시 대피와 구조 활동을 위한 방재계획은 물론, 지역별 위험도평가 및 재해위험도작성에 기초 자료로 이용될 것으로 기대된다. 그러나 본 연구에서는 기구축된 GIS 자료가 아닌 현장 조사를 바탕으로 구축된 DB로, 방재관점의 통합된 DB의 필요성을 제시하는데 그 의미가 있을 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.127-132
• /
• 2011

Load managing method on road became necessary since overloaded vehicles occur damage on road facilities and existing systems for preventing this damage still show many problems. Accordingly, efficient managing system for preventing overloaded vehicles could be organized by using the road itself as a scale by applying genetic algorithm to analyze the load and the drive information of vehicles. First of all, accurate analysis of load using the behavior of road itself is needed for solving illegal axle manipulation problems of overloaded vehicles and for installing intelligent embedded load analyzing system. Accordingly in this study, to use the behavior of road, the transformation was measured by installing underground box type indoor model and indoor experiment was held using genetic algorithm and 10% error were checked.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.55-67
• /
• 2009

In Korea, previously implemented road construction project caused a big budget waste due to overestimation of transport demand. There could be reasons for such inaccuracy of transport demand estimation, but the main reasons are: (1) low reliability of used basic road transport data and (2) inadequate sharing of data among agencies/departments. The National Transport Database and the Household Travel Database in Seoul Metropolitan Area, two representing basic road transport database, will be used to the establishment of a road construction plan that will be promoted afterwards. However, these materials have problems such as low reliability and inadequateness, too. Hence, focusing on transport demand estimation related databases, this paper will make proposals for enhancing their reliability and data sharing.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.419-425
• /
• 2005

산악지역을 관통하는 도로의 경우 그 특성상 절토 후 도로를 시공하는 경우가 자주 있으며 때로는 매우 긴 구간에 일조가 적게 나타나 음영이 오래 지속되는 곳이 발생한다. 본 연구는 GIS를 이용하여 도로의 노선계획시 예상되는 일조영향을 평가하여 정확한 데이터를 제공하고자 한다. 실험대상지역을 선정하고 수치지형자료의 변환을 통하여 3D 지형 메쉬데이터를 작성하고 동일좌표체계의 도로선형자료를 반영하여 정확한 도로모델링을 생성하므로써 도로의 각 지점별 일조영향분석을 위한 기초자료를 구축하였다. 또한 도로노면상의 음영시간을 계산하고 일영이 도로 전체에 어느 정도 유지되는지를 가시적으로 모델링화하여 계절별 시간대별로 도식화하므로써 판단자의 시각적 분석을 가능케 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.261-271
• /
• 2003

A condition evaluation procedure for the pavement foundations using multi-load level Falling Weight Deflectometer(FWD) deflections is presented in this paper. A dynamic finite element program incorporating a stress-dependent material model, was used to generate the synthetic deflection database. Based on this synthetic database, the relationships between surface deflections and critical responses, such as stresses and strains in base and subgrade layers, have been established. FWD deflection data, Dynamic Cone Penetrometer(UP) data, and repeated load resilient modulus testing results used in developing this procedure were collected from the Long Term Pavement Performance (LTPP) and North Carolina Department of Transportation (NCDOT) database. Research effort focused on investigation of the effect of the FWD load level on the condition evaluation procedures. The results indicate that the proposed procedure can estimate the pavement foundation conditions. It is also found that structurally adjusted Base Damage Index (BDI) and Base Curvature Index (BCI) are good indicators for the prediction of stiffness characteristics of aggregate base and subgrade respectively. A FWD test with a load of 66.7 kN or less does not improve the accuracy of this procedure. Results from the study for the nonlinear behavior of a pavement foundations indicate that the deflection ratio obtained from multi-load level deflections can predict the type and quality of the pavement foundation materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1395-1404
• /
• 2015

This paper provides information for quantitative evaluation of transportation technology, technology development, and transportation R&D and construction engineering policy agenda. Technology classification structure and key words were established and survey was performed to identify key words of technology for transportation. Then, competitiveness of patents and journal articles is evaluated for Korea, USA, Japan, Germany, France, and England. As a result, USA is the most competitive country for all technology categories based on patents and journal articles. Korea is grouped in upper-middle class for overall transportation technology level. However, there are some variances among the level of technologies. The results of this research can be utilized to establish a road map for transportation R&D and plans.