• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.275-292
• /
• 2017

Large landslides have occurred more than 100 times each year by the influence of cyclones and torrential rain each year in Vietnam. Nevertheless, they $don^{\circ}$Øt have a scientific management system to prevent the landslide disaster in advance. In this study, we acquisited the risk factor and damage factor about each slope throughout basic survey at Hoang Sa Costal Road, Danang and at Ho Chi Minh Road, Quangnam. The priority of investigation technique considering of the exposure characteristics of the road slope in Vietnam developed by the empirical analysis with the acquired data. As a result, we can set the foundation of scientific management for the road slope management system in Vietnam.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.41-50
• /
• 2011

It is well-known that pavement is easily damaged by several factors including permanent deformation and fatigue crack, causing service life of the pavement to be shorter than expected. It is very important to predict amount of permanent deformation for designing pavement and developing design method of pavement. A new model of permanent deformation of pavement materials based on concept of shear stress ratio has been proposed because the lower pavement materials are highly affected by shear strength of the material. In this study a large repetitive triaxial load test has been adapted for performing test of permanent deformation of crushed subbase materials. The test procedure which includes concept of shear stress ratio has been newly developed. Several important model parameters can be obtained from the test that can be used for making correct permanent deformation model of the material.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.89-97
• /
• 2014

This study investigated how much the spread of traffic control information affect the traffic congestion in order to identify the behavior of the individual drivers that impacts on the entire transport system. For this purpose, agent-based transportation model was constructed. GIS data were directly used for the transportation model and the processing steps of the simulation results are presented. The results showed that the average speed was not lowered when the traffic information was provided to 30 to 70% of total drivers. In contrast, the driver's average speed is reduced when he traffic information was provided to less than 20% or 80% or more. In summary, the provision of traffic information to drivers has an influence on the traffic flow and bypassing vehicles can generate local congestion. This results can be used as a basis for the future direction of road transport policy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.71-82
• /
• 2021

In this study, a novel method for monitoring road pavements using the Mobile Mapping System (MMS) and a deep learning crack detection system was presented. Furthermore, an optimal maintenance method through economic analysis was presented targeting the pavement section of Sejong City. As a result of monitoring the pavement conditions, it was confirmed that the pavement ratings were good in the order of national highways, municipal roads, and roads of provinces. In addition, economic analysis using the pavement deterioration model showed that micro-surfacing, one of the preventive maintenance methods, is the most economical in terms of maintenance costs and user benefits. The results of this study are expected to be used as fundamental reference for local governments' infrastructure management plans.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.521-539
• /
• 2009

This study investigates the time-space characteristics of the road traffic flows in Seoul and the relationship with land use patterns. For the purpose, we analyze the road traffic data collected at 118 observation sites over Seoul City area since 1993. We examine the time-trend of the annual average traffic flows per day during the last fourteen years. Three different trends are revealed: rapid increase during the time period between 1993 and 1997, maintenance same level after sharp decrease between year 1997 and 1998, and gradual decrease after sharp decrease between year 2003 and 2004. The spatial distribution patterns of road traffic flows have also been changed significantly during the period. The traffic flows in the urban center have been declined gradually, while the traffic flows in the boundary area and southern CBDs have increased dramatically. In order to examine the relationship with the changes in the land-use patterns and road traffic flows, we analyze the changes in the spatial distribution patterns of population and industries. We developed three multiple linear regression models to test the relationships between the changes in the land-use variables and road traffic flows.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.1-12
• /
• 2007

Roads in Korea can be classified into four types according to their responsible authorities. For example, Motorway is constructed, managed, and operated by the Korea Highway Corporation. Ministry of Construction and Transportation is in charge of National Highway, and Province Roads are run by each province government. Urban/county Roads are run by corresponding local government. This study analyses the trends of road accidents for each road type. For this purpose, the numbers of accidents, fatalities, and injuries are compared for each road type for last 15 years. The result shows that Urban/County Roads are the most dangerous, while Motorways are the safest, when we simply compare the numbers of accidents, fatalities, and injuries. However, when we compare these numbers by dividing by total road length, National Highway becomes the most dangerous while Province Roads becomes the safest. In the case of road accidents, fatalities, and injuries per vehicle km, which is known as the most objective comparison measure, it turns out that National Highway is the most dangerous roads again. This study also developed time series models to estimate trends of fatalities for each road type. These models will be useful when we set up or evaluate targets of national road safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.759-766
• /
• 2008

Road classification system is the first step for determining the road function and design standards. Currently, roads are classified by various indices such as road location and function. In this study, we classify road using various traffic indices as well as to identify traffic characteristics for each type of road. To accomplish the objectives, mixture model was applied for classifying road and analyzing traffic characteristics using traffic data that observed at permanent traffic count stations. A total of 8 variables were applied: annual average daily traffic(AADT), $K_{30}$ coefficient, heavy vehicle proportion, day volume proportion, peak hour volume proportion, sunday coefficient, vacation coefficient, and coefficient of variation(COV). A total of 350 permanent traffic count points were categorized into three groups : Group I (Urban road), Group II (Rural road), and Group III (Recreational road). AADT were 30,000 for urban, 16,000 for rural, and 5,000 for recreational road. Group III was typical recreational road showing higher average daily traffic volume during Sunday and vacational periods. Group I showed AM peak and PM peak, while group II and group III did not show AM peak and PM peak.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.687-690
• /
• 2007

This study is a basic research on looking onto bringing performance warranty contract into the country, to consider the usage in architecture which it is usually used on road pavement in developed countries. The study will also apply performance warranty contracts on public private partnerships through examination and analysis of various matters which will lead to globalization of the korean architecture industry, the increase of quality of result, better convenience for the orderer, the decrease of cost, and the acceleration on research for technical development.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.121-129
• /
• 2010

Through this paper, we studied on the basic concept of vibration-induced power generation for urban infrastructures. Since the travelling of automobiles on the bridge cause vibration, it is possible to convert the vibration energy into green-electric energy by utilizing magnetic induction technology. In this paper we define the concept of green-bridge vibration power generation system which contains the concept of magnetic induction technology and propose a vibration power generation device for converting the bridge vibration energy into the electric energy. Also, an experiment was held by applying the vibration power generator on a real bridge. The results showed the applicability and effectiveness of the vibration power generator.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.94-101
• /
• 2011

In this study, in order to develop organic-inorganic hybrid packaging materials(PM) of bike paths using blast furnace slag(BS) as industrial by-products, fundamental properties of organic-inorganic hybrid packaging materials were performed. Test result, the increase of Acryl emulsion polymer(AEP)/binder(B) ratios tends to delay the setting time, to increase the table flow, to decrease the strength by material segregation and to increase the length change. The optimal mix proportion of AEP decides on 40%(AEP/B) due to workability and high strength. The increase of BS replacement ratios also tends to delay the setting time, to separate AEP from B and to decrease the strength by material segregation. When BS replacement ratios were lower than 40%, they are satisfied with goal properties.