• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.199-207
• /
• 2001

We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.489-491
• /
• 2000

본 논문은 ATM(Abstract Timed Machine)으로 명세된 실시간 시스템을 검증하기 위한 방법을 기술한다. ATM은 임무 위급 시스템인 실시간 시스템을 명세, 분석, 검증하기 위한 정형기법이다. ATM은 모드와 전이, 포트로 구성된다. 다른 정형기법과 비교하여 ATM은 소프트웨어의 순환공학 과정에서 사용하기 위해 설계되었다. 역공학 과정에서 ATM은 계산 논리 뿐만 아니라 실시간 시스템의 실제 소스코드에 있는 설계나 환경정보를 표현할 수 있다. 이러한 목적을 위해 ATM은 다양한 모드를 사용한다. ATM을 사용한 실시간 시스템의 검증은 도달성 그래프를 생성함으로써 수행한다. 도달성 그래프는 상태와 시간을 추상화되고 압축된 형태로 표현할 수 있으며 그 결과 시간 속성을 지닌 상태 공간을 감소시킬 수 있다. 또한 시스템의 교착상태를 쉽게 발견할 수 있다. 본 논문은 ATM과 실행 모델, 도달성 그래프, 검증을 위한 속성 등을 기술하며 이들을 다른 정형 기법들과 예제를 통하여 비교한다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.452-459
• /
• 2021

Estimating the mutual time delay between two acoustic sensors is used in various fields such as tracking and estimating the location of a target in room acoustics and sonar. In the time delay estimation methods, there are a non-parametric method, such as Generalized Cross Correlation (GCC), and a parametric method based on system identification. In this paper, we propose a time delay estimation method based on the parametric method. In particular, we propose a method that considers the noise in each receiving acoustic sensor. Simulation confirms that the proposed algorithm is superior to the existing generalized cross-correlation and adaptive eigenvalue analysis methods in white noise and reverberation environments.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.499-505
• /
• 2018

Time delay estimation between two acoustic sensors is widely used in room acoustics and sonar for target position estimation, tracking and synchronization. A cross-correlation based method is representative for the time delay estimation. However, this method does not have enough consideration for the noise added to the receiving acoustic sensors. This paper proposes a new time delay estimation method considering the added noise on the receiver acoustic sensors. From comparing with the existing GCC (Generalized Cross Correlation) method, and adaptive eigen decomposition method, we show that the proposed method outperforms other methods for a colored signal source in the white Gaussian noise condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.829-837
• /
• 2006

Due to the internet network congestion, packets may be dropped or delayed at routers. This phenomenon degrades the quality of streaming applications that require high QoS requirements. The proposed algorithm in this paper, called DBRC(Delay-Based Rate Control), tries to cause router queue occupancy to reach a steady state or equilibrium by throttling the transmission rate of the multimedia traffics when network delays tend to increase and also probing for more bandwidth when network delays tend to decrease. Simulation results show that the proposed algorithm provides smooth transmission rate, nearly constant delay and low packet loss rates, compared with TFRC(TCP Friendly Rate Control) that is one of dominant multimedia congestion control algorithms.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.383-383
• /
• 2018

최근 기후변화와 도시화로 인해 국지성 집중호우 및 불투수면적이 증가하고 있는 실정이며, 도시 지역 내의 첨두유량, 도달시간, 지체시간 등과 같은 수문학적 인자가 변화함에 따라 재산피해, 인명피해가 발생하고 있다. 저영향개발(Low Impact Development, LID) 기법은 수리수문학적 및 환경생태학적 문제를 저감하는 방안 중 하나로써 도시지역에서 수환경을 자연상태로 복원하는 대안으로 제시되고 있다. LID 기법 중 하나인 옥상녹화는 도시 내의 불투수면 증가로 인한 초과 지표면유출을 저감시켜 물관리를 하는 기술이다. 본 연구는 경남 양산시 부산대학교 제 2 캠퍼스에 조성된 옥상녹화 장치를 이용하여 정량적으로 유출량을 분석하였다. 비식생구와 식생구를 설치하고 실험의 시나리오는 강우강도를 25, 50, 75, 100 mm/hr로 설정하여 측정된 데이터 값을 바탕으로 SWMM(Storm Water Management Model) 모델링을 수행하였다. 유출량 값은 SWMM 5의 매개변수 추정지원 시스템인 SWMM-SCE를 이용하여 모형을 자동보정하였다. 보정된 모의유량은 실측유량과 0.28~3.81% 만큼의 오차를 보였고 각 시나리오에 따라 검증한 결과 상관계수가 0.82 이상으로서 실측값과 높은 상관성을 나타내었다. 옥상녹화 실험의 경우, 강우강도 75mm/hr일 때 첨두유출저감율과 지연시간은 각각 15.45% 감소, 15초 지연으로 최적의 효율이 나타났으며 강우강도 25mm/hr일 때 첨두유출저감율과 지연시간은 각각 1.36% 감소, 4초 지연으로 최저의 효율이 나타났다. SWMM 모의 결과는 강우강도 75mm/hr일 때 첨두유출저감율과 지연시간은 각각 15.45% 감소, 16초 지연으로 최적의 효율이 나타났으며 강우강도 25mm/hr일 때 첨두유출저감율과 지연시간은 각각 2.73% 감소, 4초 지연으로 최저의 효율이 나타났다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.21-23
• /
• 2000

고속 회로 합성에 있어서, Wallace 트리 스타일은 연산을 위한 가장 효율적인 수행방식의 하나로 인식되어 졌다. 그러나, 이러한 방법은 빠른 곱셈기의 수행이나 여러 가지 연산수행에 있어, 입력 시그널을 고려하지 않은 일반적인 구조로 수행되어졌다. 본 논문은 연산기에 있어서 이러한 제한점을 극복하는 문제를 다룬다. 우리는 캐리-세이브 방법을 덧셈, 뺄셈, 곱셈이 혼합되어 일T는 일반적인 연산 회로에 적용한다. 그 결과 효율적인 회로를 생성하며, 시그널들이 임의의 도달시간에 대해 회로의 도달시간을 최적화 한다. 또한, 우리는 최적 지연시간의 캐리-세이브 가산회로를 생성하는 효율적인 알고리즘을 제안하였다. 우리는 이러한 최적화 방법을 여러 고속 디지털 필터에 적용시켜 보았고 이는 기존의 비트 단위가 아닌 캐리-세이브 수행방법보다 5%에서 30%사이의 수행시간 향상을 가져왔다.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.18-22
• /
• 2002

As a single arrival traveltime, maximum energy arrival traveltime has been known as the most proper operator for Kirchhoff migration. In case of the model having the simple structure, both the first arrival traveltime and the maximum energy arrival traveltime can be used as the correct operators for Kirchhoff migration. However for some model having the complex and high velocity contrast structure, the migration using the first arrival traveltime can't give the correct depth section. That is, traveltime to be required in Kirchhoff migration is the maximum energy traveltime, but, needs considerably more calculation time than that of first arrival. In this paper, we propose the method for calculating the traveltime approximated to the maximum energy arrival using one-way wave equation. After defining the WAS(Wrap Around Suppression) factor to be used for calculating the first arrival traveltime using one-way wave equation as the function of lateral grid interval and depth and considering the delay time of source wavelet. we calculate the traveltime approximated to the maximum energy arrival. to verify the validity of this traveltime, we applied this to the migraion for simple structure and complex structure and compared the depth section with that obtained by using the first arrival traveltime.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.216-225
• /
• 2020

In this paper, broadband underwater propagation channel modeling based on eigenray analysis is discussed. Underwater channels are often formulated in frequency domain time-harmonic signals, which are impractical for simulating broadband signals in time domain. In this regard, time domain modeling of the underwater propagation channel is required for the simulation of broadband signals, for which the eigenray analysis based on ray tracing, resulting in multipath propagation delays in time-domain, is used in this paper. For discrete time system application, the phase, frequency-dependent loss and non-integer sample delays for each eigenray, are approximated by the finite impulse response of the broadband propagation channel.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.7
• /
• pp.710-718
• /
• 2009

The time difference of arrival(TDOA) algorithm is being used widely for identifying the location of a source emanating either electrical or acoustic signal. It's application areas will not be limited to identifying the source at a fixed location, for example the origin of an earthquake, but will also include the trajectory monitoring for a moving source equipped with a GPS sensor. Most of the TDOA algorithm uses time correlation technique to find the time delay between received signals, and therefore difficult to be used for identifying the location of multiple sources. In this paper a TDOA algorithm based on cross-spectrum is developed to find the trajectory of two sound sources with different frequencies. Although its application is limited to for the sources on a disk plane, it can be applied for identifying the locations of more than two sources simultaneously.