• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.65-68
• /
• 2007

전극 막 접합체를 만드는 방법 중 연속식 공정으로서의 데칼법의 장점은 제조공정의 단순화와 두께 균일성 그리고 대량생산 등을 그 예로 들 수 있다. 본 실험에서는 코터를 이용해 전극 막 접합체를 만들기 위해 높은 점도의 촉매 슬러리를 제조하였다. Johnson Mattey 사의 HiSPEC 40 wt% Pt/C 촉매와 Dupont사의 20 wt% Nafion Solution 그리고 물을 이용하여 촉매 슬러리를 제조한 후 코터를 이용하여 데칼법으로 전극 막 접합체를 제조하였다. 완성된 전극 막 접합체의 성능 평가를 실시하였으며 상용화된 전극 막 접합체와 그 특성을 비교 분석을 실시해보았다.

• New & Renewable Energy
• /
• v.6 no.1
• /
• pp.46-52
• /
• 2010

Membrane electrode assemblies (MEAs) for proton exchange membrane fuel cells (PEMFCs) have been extensively studied to improve their initial performance as well as their durability and to facilitate the commercialization of fuel cell technology. To improve the MEA performance, particularly at low Pt loadings, many approaches have been made. In the present study, MEA performance improvement was performed by adding $TiO_2$ particles into the catalyst layer of MEA. Most of previous studies have focused on the MEA performance enhancement under low humidity conditions by adding metal oxides into the catalyst layer mainly due to the water keeping ability of those metal oxides particles such as $Al_2O_3$, $SiO_2$ and zeolites. However, this study mainly focused on the improvement of MEA performance under fully humidified normal conditions. In this study, the MEA was prepared by decal method aiming for a continuous MEA fabrication process. The decal process can make very thin and uniform catalyst layer on the surface of electrolyte membrane resulting in very low interfacial resistance between catalyst layer and the membrane surface and uniform electrode structure in the MEA. It was found that the addition of $TiO_2$ particles into the catalyst layer made by decal method can minimize water flooding in the catalyst layer, resulting in the improvement of MEA performance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.585-591
• /
• 2011

This study has focused on the development of high performance membrane-electrode assemblies (MEAs) fabricated by decal method for proton exchange membrane fuel cell (PEMFC). To study the effect of ionomer contents on performance, we fabricated MEAs with several electrodes which were prepared by varying the quantity of ionomer from 20 wt.% to 45 wt.% in catalyst layer. The MEA performance was obtained through single cell test. The MEA prepared from electrode with 25wt.% of ionomer showed the best performance. We evaluated the surface area and pore volume of electrode with BET. We found that the surface area and pore volume in electrode decreased rapidly at the electrode with 40wt.% of ionomer in catalyst layer. MEA was fabricated by roll laminator machine and the roll laminating conditions for the preparation of MEA, such as laminating press, temperature and speed, were optimized. The MEA performance is not affected by laminating temperature and speed, but roll laminating press have a great effect on MEA performance.