• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.463-467
• /
• 2002

In this paper, we construct the fault detection and diagnosis system based on fuzzy algorithm in the injection molding machine. Data of operating injection molding machine are acquired in database in order to raise the reliability of detection and diagnosis.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.281-288
• /
• 2008

Recently, the advance of multimedia hardware has fostered the development of wireless multimedia sensor network which is able to ubiquitously obtain multimedia content such as image or audio from the environment. The multimedia data which has several characteristics such as large size and correlation between the data requires reliability in transmission. However, the existing solution which take the focus on the efficiency of network mainly, is not appropriate to transmit the multimedia data. In the paper, we proposes a reliable asynchronous image transfer protocol, RAIT. RAIT applies double sliding window method in node-to-node image tansfer to prevent the packet loss caused by network congestion. The double sliding window consists of one sliding window for the receiving queue, which is used for prevention of packet loss caused by communication failure between nodes and the other sliding window for the sending queue which prevents the packet loss caused by network congestion. the routing node prevents the packet loss and guarantees the fairness between the nodes by scheduling the packets based on the image non-preemptively. The RAIT implements the double sliding window method by cross layer design between RAIT layer, routing layer, and queue layer. The experiment shows that RAIT guarantees the reliability of image transmission compared with the existing protocol.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.43-55
• /
• 2012

A methodology for BIM Quality Assurance in the construction industry is becoming increasingly an important issue to determine the reliability of BIM. However, the quality assurance of BIM is currently limited to check 3D models, such as clash detection and space layout while verification methods for disciplinary BIM results from structural engineering, mechanical engineering, and estimation do not exist yet. Particularly, in the BIM-based estimation mathematical equations to take off quantities are not clearly exposed so that the results are not quite accepted at practices. With the concept of reliability engineering defined in the manufacturing industry to improve reliability of outcomes of BIM-based quantity take-off, impacting factors that affect reliability of BIM-based quantity take-off were derived. It was found that the factors also include the modeling method and the features of a BIM tool. Therefore, this research aims to propose modeling and verification methods to improve reliability of BIM-based quantity take-off through the pilot test that was performed with commercial BIM tools and IFC-based BIM data.

• 한국데이터정보과학회:학술대회논문집
• /
• 2003.05a
• /
• pp.15-17
• /
• 2003

부품 및 소재산업의 육성을 위하여 2003년 4월부터 운영되는 신뢰성보험사업과 관련된 각종 제도를 검토하며, 신뢰성보험의 개념, 담보하는 위험의 분류, 운영체계 및 상품의 설계내용에 대하여 알아본다.

• 한국IT서비스학회:학술대회논문집
• /
• 2006.05a
• /
• pp.301-306
• /
• 2006

ISO/IEC 9126에 의하면 스프트웨어 품질 특성은 기능성, 신뢰성, 사용성, 효율성, 유지보수성, 이식성의 6가지 품질 특성으로 나누어 평가를 실시하고 있다. 각 특성은 부특성으로 나누어지고 이러한 부특성에 따른 평가 항목을 메트릭으로 정의하고 있다. 그러나 품질 특성 중 신뢰성의 경우는 ISO/IEC 9126에서 제시한 부특성인 성숙성, 오류허용성, 복구성, 준수성에 따라 품질 평가 항목이 메트릭으로 제시되어져있다. 그러나 제시되어져 있는 신뢰성 평가 항목은 소프트웨어 신뢰성 성장 모델을 이용하여 신뢰도를 평가하고 메트릭 값을 얻도록 구성되어져 있으나 수리적인 어려움과 데이터 수집에 따르는 문제점으로 인하여 적용하고 있지 못한 실정이다. 이러한 문제점을 고려하여 고장 데이터를 이용하여 소프트웨어 신뢰성을 평가할 수 있는 방안을 검토하고 현재 연구가 진행되어지고 있는 국제 표준 문건 ISO/IEC 25000 시리즈를 국내 표준으로 적용할 수 있는 방안에 대해서 연구한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.34-44
• /
• 2012

Many kind of sensors in the dam produce a lot of data associated with the maintenance and safety of the dam. So it is important to measure the reliability of the sensor (or measured data). In this paper, the new method using modified coherence function is proposed to measure the reliability of the sensor remotely. To verify feasibility of proposed method in the field, proposed method was applied to data of piezometer and earth pressure cell. Through field applications, the potential of the proposed method was verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.867-874
• /
• 2010

Since high packet losses occur in multi-hop transmission of wireless sensor networks, reliable data transmission is required. Especially, in case of event-driven data, a loss recovery mechanism should be provided for lost packets. Because retransmission for lost packets is requested to a node that caches the packets, the caching node should maintains all of data for transmission in its buffer. However, nodes of wireless sensor networks have limited resources. Thus, both a loss recovery mechanism and a buffer management technique are provided for reliable data transmission in wireless sensor networks. In this paper, we propose a buffer management technique at a caching position determined by a loss recovery mechanism. The caching position of data is determined according to desirable reliability for the data. In addition, we validate the performance of the proposed method through computer simulations.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2037-2039
• /
• 2003

원자력 발전소의 원자로보호계통(Plant Protection Systems)은 그 특성상 안전성과 신뢰성을 중시하며, 매우 엄격한 설계 요건을 요구한다. 또한 원자로 보호계통에 사용되는 데이터 통신망은 최악의 예상된 조건에서도 신뢰할 수 있는 성능을 보여야 하며, 실증 시험을 통해 확인되어야 한다. 이러한 특성을 고려하여 국산화과제로 개발 중인 원자로보호계통의 데이터 통신망은, 개방형 통신 프로토콜인 프로피버스(Profibus)를 적용하고 있다. 본 논문에서는 적용된 통신 프로토콜인 Profibus에 대한 성능 모델을 제시하고, 제시된 성능 모델을 통해 데이터통신망이 결정론적(Deterministic) 요건을 만족한 수 있는 성능 특성을 분석하고자 한다. 이를 통해 Profibus를 적용한 데이터 통신망이 요구되는 성능, 신뢰성, 독립성 및 건전성 요건을 만족하도록 하기 위한 설계 요건을 제시하고자 한다.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.1-6
• /
• 2022

Real-time systems using web cralwing data must provide users with data from the same database as remote data. To do this, the web crawler repeatedly sends HTTP(HtypeText Transfer Protocol) requests to the remote server to see if the remote data has changed. This process causes network load on the crawling server and remote server, causing problems such as excessive traffic generation. To solve this problem, in this paper, based on user events, we propose a real-time web crawling technique that can reduce the overload of the network while securing the reliability of maintaining the sameness between the data of the crawling server and data from multiple remote locations. The proposed method performs a crawling process based on an event that requests unit data and list data. The results show that the proposed method can reduce the overhead of network traffic in existing web crawlers and secure data reliability. In the future, research on the convergence of event-based crawling and time-based crawling is required.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.59-65
• /
• 2019

In this paper, we propose a software quality measurement metrics of ISO / IEC 25023, which is newly proposed for software quality evaluation, to compare the difference with ISO / IEC 9126-2 which was used for software quality evaluation. In this paper, we propose a method for evaluating the quality of reliability based on the software reliability growth model among the eight quality characteristics presented in ISO / IEC 25023. Based on ISO / IEC 25023, software-quality evaluations demonstrate that there is some risk in evaluating reliability when based on data.