• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.102-111
• /
• 2016

This study aims to identify the characteristics of the regional innovation system(RIS) and the determinants of innovation performance of SMEs. Data were collected from a questionnaire survey on 64 SMEs in the Daejeon and Chungcheong regions to uncover the relationship between capabilities, regional innovation capacities and innovation performance. The moderating effects of regional innovation capacities on the relationship between firms' innovation capabilities and performance were also tested. Empirical results revealed that R&D, marketing and entrepreneurial orientation had positive effects. The moderating effect of regional innovation capabilities on the relationship between entrepreneurial orientation (risk taking) and performance was also confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.133-140
• /
• 2016

The Ministry of Land, Infrastructure and Transport has introduced low-floor buses, which are convenient for passengers getting on and off the bus and for the handicapped. The standard bus model is 11 m long and uses compressed natural gas (CNG). However, this model has drawbacks in narrow rural road conditions such as those in farming and fishing villages and mountainous areas, as well as difficulty in refueling since CNG facilities are not readily available. In this study, running resistance values were obtained by coasting performance tests on actual roads using a Tata Daewoo LF-40 model with three different weight conditions: curb vehicle weight (CVW), half vehicle weight (HVW), and gross vehicle weight (GVW).The test methods include WHVC, NIER-06, and constant-speed driving at 60 km/h. These tests were used to measure the fuel economy of vehicles other than the target vehicles to obtain the combined fuel economy. The energy efficiency was highest in the case of CVW. In the WHVC mode, the fuel consumption rates of HVW and GVW were typically 3.5% and 12% higher than that of CVW, respectively. In constant-speed driving, the fuel efficiency of HVW was higher than that of CVW. Further research is required to analyze the exhaust gas data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.310-318
• /
• 2016

This study examined the correlation between microscopic factors and pedestrian volume in an urban environment, focusing on the microscopic factors that stimulate the pedestrian volume, such as density, diversity, network structure, accessibility, and the form of lots and buildings. In particular, factors already known to boost the pedestrian volume include density, diversity and accessibility, which are three variables strongly related to the concept of the 3Ds (Density, Diversity, Design) proposed by Cervero and Kockelman (1997) and the additional 2Ds (Distance to Transit, Destination Accessibility) suggested by Ewing et al. (2008). The analysis in this study was based on the 2010 survey of the floating population in Seoul, particularly on the data from Jongro-gu and Jung-gu in Gangbuk area. Data were established by analyzing the microscopic factors within a 500m radius around each of the 1,028 spots from which the pedestrian volume in Jongro-gu and Jung-gu was measured. The analysis showed that density, diversity and accessibility, three factors that were already known to be effective in increasing pedestrian volume, also have the same effect in Jongro-gu and Jung-gu.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.548-553
• /
• 2016

This study analyzed the effect of the operation system of human resource management. First, the primary operating direction of the goal, talent selection system, and personnel management personnel management affected almost all the performance variables. More than one primary goal of personnel management in the loyalty inspired workers more than the fixed labor costs, and external recruitment of short-term hiring favored internal training scheme for long-term employment, employee training, and development in the long term more than short-term performance improvement the more weight to quality and innovation in the productivity of labor, product and services, employee-driven innovation, reduce turnover, had a positive impact on labor relations. On the other hand, the primary goal of personnel management and personnel selection methods had a positive impact on financial performance. Personnel management operating direction did not significantly affect the financial results. Second, the main type of employee utilization affected the quality of products and services, and labor relations. Trying to take advantage of temporary workers more than regular workers had a positive impact on the quality of products and services, and labor relations. Third, the operating unit of Personnel Management had an impact on the degree of innovation of products and services. Both personal achievements and the performance of the operating units had a positive impact on the degree of innovation of products and services, more than teamwork and personnel management. This study provided practical implications for verifying the effect of detailed characteristics of human resource management on financial/non-financial business performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.43-49
• /
• 2017

In recent years, the use of BIM in domestic construction has been increasing, but it is used mainly for internal and external visualization rather than for BIM design including drawings. For this reason, several studies have highlighted the lack of libraries and economic problems for BIM design. In other words, for the most economically small domestic design offices, activating the BIM design is a negative factor because it is difficult to invest the necessary manpower and cost to produce and use the required BIM library. The BIM design can be more applicable if the library can be supplied economically, easily, and quickly. In this study, BIM library business model and consideration factors that can provide BIM library service economically, easily, and quickly by considering the existing building material selection task and BIM library are presented. The proposed business model will increase the number of suppliers of BIM libraries, which are lacking in Korea, and will enable an effective BIM design at low cost and effort. If a service that reflects the business model proposed in this study is made, an integrated database that can consistently share information in the design, construction, and maintenance stages will be constructed. This can monitor the changes in material and equipment information during the life cycle of the building. The database can be used to monitor any changes in material and equipment information throughout the life cycle of a building, so that it can be used as historical data for effective design and maintenance as well as for material and equipment upgrades.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.718-725
• /
• 2017

A liquid storage tank is one of the most important structures in industrial complexes dealing with chemicals, and its structural damage due to an earthquake may cause a disastrous event such as the leakage of hazardous materials, fire, and explosion. It is thus essential to assess the seismic fragility of liquid storage tanks and prepare for seismic events in advance. When a liquid storage tank is oscillated by a seismic load, the hydrodynamic pressure caused by the liquid-structure interaction increases the stress and causes structural damage to the tank. Meanwhile, the seismic fragility of the structure can be estimated by considering the various sources of uncertainty and calculating the failure probabilities in a given limiting state. To accurately evaluate the seismic fragility of liquid storage tanks, a sophisticated finite element analysis is required during their reliability analysis. Therefore, in this study, FERUM-ABAQUS, a recently-developed computational platform integrated with commercial finite element and reliability analysis software packages, is introduced to perform the finite element reliability analysis and calculate the failure probability of a liquid storage tank subjected to a seismic load. FERUM-ABAUS allows for automatic data exchange between these two software packages and for the efficient seismic fragility assessment of a structure. Using this computational platform, the seismic fragility curve of a liquid storage tank is successfully obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.118-124
• /
• 2017

In this study, a numerical simulation was performed using commercial code Fluent(v.17.1). The underground Combined Cycle Power Plant (CCPP) was simplified to analyze the methane gas leakage with the crack size and position. In addition, extensive numerical simulations were carried out for different crack sizes from 10 mm to 20 mm. The crack position is the gas leakage, which is assumed to be near the pipe elbow and the gas turbine. A total of 4 cases were compared and analyzed. To analyze the gas leakage, the concept of the Lower Flammable Limit (LFL) was applied. The leakage distance was defined in the longitudinal direction, and the transverse direction was estimated and quantitatively analyzed. As a result, the leakage distance in the longitudinal direction varies by 52.3 % depending on the crack size at the same crack position. Moreover, the maximum difference was 34.8 % according to the crack position when the crack sizes are identical. As jet flow impacts on the obstacle and changes its direction, the recirculation flows are formed. These results are expected to provide useful data to optimize the location and number of gas detections in confined spaces, such as underground CCPP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.235-241
• /
• 2017

This study investigated the performance factors for entry into the labor market of 4 - year college graduates using KEEP data and to determine how the labor market performance is related to the training institutions. The labor market performance is termed as 1) labor market entry time, 2) employment type, and 3) wage. Correspondence analysis was carried out with a nominal variable indicating the characteristics of a training institute, in which the respondents were trained for employment, and the relationship between the two was expressed in a more visible way. First, as a result of analyzing the first job transition period, the shortest training institutes were analyzed as public institutes, followed by private institutes and universities. Second, the employment rate of the public institutions is higher than that of private institutes and universities. Second, the employment rate of public institutions is higher than that of private institutes and universities. Third, the wage level of public institutes ranged from wage level 1 to 3, while private institutes had a wage level ranging from 2 to 4. Universities showed a wide range from 1 to 5. Based on these results, this study can analyze the difference in the labor market performance by training institutions when young people enter society.

• Journal of Information Management
• /
• v.36 no.3
• /
• pp.183-193
• /
• 2005

Korean Academy of Medical Sciences began developing Korean Medical Citaton Index(KoMCI) database in 2002, and has announced the impact factors of Korean medical journals published since 2000. In July 2005, Korea Research Foundation also announced the KCI impact factor of journals covering all subject areas for the 2003 and 2004. We compared the impact factor(IF), impact factor excluding self-citation(ZIF), and self-citation impact factor(SIF) of KoMCI 2004 and KCI 2004 in order to disclose why there is such a great difference in the values of impact factors between two databases. Out of 72 medical journals in both database, 59 journals were compared after excluding the missing data in KCI. Mean IF of KoMCI 2004 was 0.2 and that of KCI 2004 was 0.03(p=0.0000). Mean ZIF of KoMCI was 0.06 and that of KCI was 0.01(p=0.000). Mean SIF of KoMCI was 0.139 and that of KCI was 0.02(p=0.0000). We presumed that the major difference in the impact factor values was originated from the fact that KCI does not control the authority of journal names cited in the references. We strongly recommend that it is necessary to control the authority especially if Korea Research Foundation wants to ensure the validity and reliability of KCI data in the evaluation of korean journals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.160-170
• /
• 2010

Steel Fiber Reinforced Concrete (SFRC) beams has greater shear strength than typical reinforced concrete beams due to the high tensile strength of steel fibers. In this research, an experiment has been conducted to investigate the shear behavior of SFRC beams, and especially, the portion of shear resistance by uncracked compressive concrete section has been measured. Based on the test results in this study and 87 test data collected from literature, the accuracy of the existing equations for the estimation of shear strength has been evaluated. The shear strength of SFRC beams increased as more steel fibers were mixed. However, it is considered that the most efficient amount of steel fiber for enhancement of shear strength would be between 1% and 2% in that the specimen with 0.5% of steel fibers were abruptly failed after inclined cracking, and that the specimen with 2.0% of steel fibers showed a relatively low efficiency in increasing shear strength. The portion of shear resistance by the uncracked compressive concrete section was measured to be greater than 21%, and the equation proposed by Oh et al. provided the best accuracy on the estimation of shear strength of SFRC beams among the approaches evaluated in this study.