• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.81-88
• /
• 2018

Spectrum sensing, the key technology of the cognitive radio networks, is used by a secondary user to determine the frequency state of a primary user. The energy detection in the spectrum sensing determines the presence or absence of a primary user according to the intensity of the allocated channel signal. Since this technique simply uses the strength of the signal for spectrum sensing, it is difficult to detect the signal of a primary user in the low SNR band. In this paper, we propose a way to combine spectrum sensing and support vector machine using wavelet packet decomposition to overcome performance degradation in low SNR band. In our proposed scheme, the sensing signals were extracted by wavelet packet decomposition and then used as training data and test data for support vector machine. The simulation results of the proposed scheme are compared with the energy detection using the AUC of the ROC curve and the accuracy according to the SNR band. With simulation results, we demonstrate that the proposed scheme show better determining performance than one of energy detection in the low SNR band.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.5
• /
• pp.315-321
• /
• 2023

Long-span bridges are flexible structures with low natural frequencies and damping ratios, making them susceptible to vibrational serviceability problems. However, the current design guideline of South Korea assumes a uniform threshold of wind speed or vibrational amplitude to assess the occurrence of harmful vibrations, potentially overlooking the complex vibrational patterns observed in long-span bridges. In this study, we propose a pointwise vortex-induced vibration (VIV) detection method using a deep-learning-based signalsegmentation model. Departing from conventional supervised methods of data acquisition and manual labeling, we synthesize training data by generating sinusoidal waves with an envelope to accurately represent VIV. A Fourier synchrosqueezed transform is leveraged to extract time-frequency features, which serve as input data for training a bidirectional long short-term memory model. The effectiveness of the model trained on synthetic VIV data is demonstrated through a comparison with its counterpart trained on manually labeled real datasets from an actual cable-supported bridge.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.113-129
• /
• 2021

Recently, traffic congestion in the city is continuously increasing due to the expansion of the living area centered in the metropolitan area and the concentration of population in large cities. New road construction has become impossible due to the increase in land prices in downtown areas and limited sites, and the importance of efficient data-based road operation is increasingly emerging. For efficient road operation, it is essential to classify appropriate scenarios according to changes in traffic conditions and to operate optimal signals for each scenario. In this study, the Dynamic Time Warping model for cluster analysis of time series data was applied to traffic volume and speed data collected at continuous intersections for optimal scenario classification. We propose a methodology for composing an optimal signal operation scenario by analyzing the characteristics of the scenarios for each data used for classification.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1295-1303
• /
• 2010

In this paper, an effective method has been proposed for selection of white Gaussian noise(WGN) band for radio background noise measurement system under broad band noise environment. MMN which comes from industrial devices and equipment mostly happens in the shape of broad band noise mostly like impulsive noise and this is the main reason for increasing level in the present radio noise measurements. The existing method based on singular value decomposition has weak point that it cannot give good performance for the broad band signal because it uses signal's white property. The proposed method overcomes such a weakness of singular value decomposition based method by using signal's Gaussian property based method in parallel. Moreover, this proposed method hires a modelling based method which uses parameter estimation algorithm like maximum likelihood estimation(MLE) and gives more accurate result than the method using amplitude probability distribution(APD) graph. Experiment results under the natural environment has done to verify feasibility of the proposed method.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.1061-1068
• /
• 2012

This paper deals with a noise reduction algorithm which uses the binary masking approach in the time-frequency domain to improve speech intelligibility. In the binary masking approach, the noise-corrupted speech is decomposed into time-frequency units. Noise-dominant time-frequency units are removed by setting the corresponding binary masks as "0"s and target-dominant units are retained untouched by assigning mask "1"s. We propose a binary mask estimation by comparing the local signal-to-noise ratio (SNR) to a threshold. The local SNR is estimated by a training-based approach. An optimal threshold is proposed, which is obtained from observing the distribution of the training database. The proposed method is evaluated by normal-hearing subjects and the intelligibility scores are computed by counting the number of words correctly recognized.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.315-322
• /
• 2002

In this paper, a new temporal decomposition method is proposed. which takes into consideration not only spectral distortion but also bit rates. The interpolation functions, which are one of necessary parameters for temporal decomposition, are obtained from the training speech corpus. Since the interval between the two targets uniquely defines the interpolation function, the interpolation can be represented without additional information. The locations of the targets are determined by minimizing the bit rates while the maximum spectral distortion maintains below a given threshold. The proposed method has been applied to compressing the LSP coefficients which are widely used as a spectral parameter. The results of the simulation show that an average spectral distortion of about 1.4 dB can be achieved at an average bit rate of about 8 bits/Frame.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.58-62
• /
• 2016

In this paper, we propose a pre-processing scheme for improving indoor positioning accuracy in impulsive noise channel environments. The impulsive noise can be generated by multi-path fading effects by complicated indoor structures or interference environments, which causes an increase in demodulation error probability. The proposed pre-processing scheme is performed before a triangulation method to calculate user's position, and providing reliable input data demodulated from a received signal to the triangulation method. Therefore, we studied and proposed an adaptive threshold function for mitigation of the impulsive noise based on wavelet denoising. Through results of computer simulations for the proposed scheme, we confirmed that Bit Error Rate and Signal-to-Noise Ratio performance is improved compared to conventional schemes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.729-738
• /
• 2021

Feedback flow control using an artificial neural network was numerically investigated for NACA0015 Airfoil to suppress flow separation on an airfoil. In order to achieve goal of flow control which is aimed to reduce the size of separation on the airfoil, Blowing&Suction actuator was implemented near the separation point. In the system modeling step, the proper orthogonal decomposition was applied to the pressure field. Then, some POD modes that are necessary for flow control are extracted to analyze the unsteady characteristics. NARX neural network based on decomposed modes are trained to represent the flow dynamics and finally operated in the feedback control loop. Predicted control signal was numerically applied on CFD simulation so that control effect was analyzed through comparing the characteristic of aerodynamic force and spatial modes depending on the presence of the control. The feedback control showed effectiveness in pressure drag reduction up to 29%. Numerical results confirm that the effect is due to dramatic pressure recovery around the trailing edge of the airfoil.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.85-86
• /
• 2011

철도운영효율 향상을 위하여 첨단 기술을 기반으로 하는 스마트 철도 기술에 대한 개발 및 실용화 사업이 전 세계적으로 진행중에 있다. 철도의 수송력 증대와 운영비용 감소 및 시스템 변경 용이성등의 장점을 극대화하기 위하여 기존의 궤도회로 중심의 열차제어 시스템에서 통신기술을 기반으로 하는 열차제어시스템으로의 전환을 위한 많은 연구가 이루어지고 있다. 본 논문에서는 CBTC 시스템에서 GPS시스템의 적용 타당성 여부를 검증하였고 CBTC 시스템에서의 위치 정보 수신을 위한 GPS 수신데이터의 정합 알고리듬에 관한 저전력 분할 연산 알고리듬을 설계하여, 본 논문에서 제안한 코드는 기존의 수신데이터의 정합알고리듬 대비 2% 면적이 감소하는 것을 확인할 수 있었으며, 또한 전력소모가 7% 감소되는 것을 확인할 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.935-938
• /
• 2000

본 논문은 광학 현미경을 컴퓨터 상에서 구현한 소프트웨어 시스템인 Medieye 시스템에 가장 큰 문제점인 대용량의 영상 데이터를 압축하는 기법을 제안하고, Medieye 시스템에 대하여 기술한다. 현재 구현된 Medieye 시스템은 환자의 조직 샘플에 대한 고해상도 디지털 영상을 인터넷 상에서 제공하고 있으며, 궁극적으로는 의료 기관 및 의학 연구 기관의 슬라이드로 꽉 찬 캐비넷을 디지털 저장시스템으로 대체하기 위한 클라이언트 서버 구조 기반의 소프트웨어 시스템이다. Medieye 시스템은 클라이언트 프로그램, 네트워크 서버, 데이터 서버 3 부분으로 구성되었고, 이들은 정해진 통신 규약에 따라 메시지를 서로 주고받음으로써 각 부분이 상호 독립적이다 이 시스템에 적용할 영상압축 기법은 블록 기반의 웨이블릿 변환을 이용한 영상 압축이다. 입력 영상 신호를 여러 개의 부밴드 영상으로 분해하고 각 부밴드 영상에 대하여 독립적으로 다시 작은 블록으로 나누어 각 부밴드의 특성에 맞도록 영상을 압축하는 알고리즘을 제안하였다. 이 기법은 제로 트리와 비슷한 성능을 보이면서도 구조가 비교적 간단하여 계산적인 면과 수행 속도 면에서 우수한 성능을 보여 준다.