• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.143-147
• /
• 2016

Recently, digital tomosynthesis system (DTS) has been developed to reduce overlap using conventional X-ray and to overcome high patient dose problem using computed tomography (CT). The purpose of this study was to develop image reconstruction algorithm and to evaluate image characteristics and dose with chest digital tomosynthesis (CDT) system. Image reconstruction was used for filtered back-projection (FBP) methods and system geometry was constructed ${\pm}10^{\circ}$, ${\pm}15^{\circ}$, ${\pm}20^{\circ}$, and ${\pm}30^{\circ}$ angular range for acquiring phantom images. Image characteristics carried out root mean square error (RMSE) and signal difference-to-noise ratio (SDNR), and dose is evaluated effective dose with ${\pm}20^{\circ}$ angular range. According to the results, the phantom image with slice thickness filter has superb RMSE and SDNR, and effective dose was 0.166 mSv. In conclusion, we demonstrated usefulness of developed CDT image reconstruction algorithm and we constructed CDT basic output data with measuring effective dose.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.63-70
• /
• 2017

In this paper, a magnetic flux leakage(MFL) based steel bar damage detection was first researched to quantify the signals from damages on the wire rope. Though many researches inspecting damages using a MFL method was proceeded until the present, the researches are at the level that diagnose whether damages are or not. This has limitation to take measures in accordance with the damage level. Thus, a MFL inspection system was modeled using a finite element analysis(FEM) program dealing with electromagnetism problems, and a steel bar specimen was adopted as a ferromagnetic object. Then, an experimental study was also carried out to verify the simulation results with a steel bar which has same damage conditions as the simulation. The MFL signals was nearly not affected by the increase of the inspection velocity, and the magnitudes of the signals are not identical according to the change of the defect width even the defects have same depth. On the basis of the analysis, the signal properties from the damages were extracted to classify the type of damages, and it could be confirmed that classification of damages using extracted signal properties is feasible.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.377-386
• /
• 2006

There is an inseparable relation between human race and engineering work. As world developed into highly industrialized society, a diversity of large structures is being built up correspondently to limited topographical circumstance. Though large structures are national establishments which provide us with convenience of life, there are some disastrous possibilities which were never predicted such as ground subsidence and degradation. It is very difficult to analyze the volume of total metamorphosis with the relative displacement measurement system which is now used and it is impossible to know whether there is structural metamorphosis within a permissible range of design or not. In this research with an object of 13-year-old earthen dam, through generating point-cloud which has 3D spatial coordinates(x, y, z) of this dam by means of 3D Laser Scanning, we can get real configuration data of slanting surface of this dam with this method of getting a number of 3D spatial coordinates(x, y, z). It gives 3D spatial model to us and we can get various information of this dam such as the distance of slanting surface of dam, dimensions and cubic volume. It can be made full use of as important source material of reinforcement and maintenance works to detect previously the bulging of the dam through this research.

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.75-83
• /
• 2012

An experimental study was conducted to investigate the effects of change in heat release rate on unsteady fire characteristics of under-ventilated fire in a semi-closed compartment. A standard doorway width of the full-scale ISO 9705 room was modified to 0.1 m and the flow rate of heptane fuel was increased linearly with time using a spray nozzle located at the center of enclosure. Temperature, heat flux, species concentrations and heat release rate were continuously measured and then global equivalence ratio (GER) concept was adopted to represent the unsteady thermal and chemical characteristics inside the compartment. It was observed that there was a significant difference in unsteady behavior between global and local combustion efficiency, and the GERs predicted by ideal and measured heat release rate were also shown different results in time. The unsteady behaviors of temperature, heat flux and species concentrations were represented well using the GER concept. It was important to note that CO concentration was gradually decreased with the increase in GER after reaching its maximum value in the range of 2.0~3.0 of global equivalence ratio. In addition, the experimental data on unsteady thermal and chemical behaviors obtained in a semi-closed compartment will be usefully used to validate a realistic fire simulation.

• Journal of Science and Technology Studies
• /
• v.4 no.1 s.7
• /
• pp.1-30
• /
• 2004

In this paper, I have attempted to show how the environmental controversy surrounding the Saemangeurn Reclamation Project in Korea has been framed as narrow scientific debates. First of all, science, or specifically the Expert Review Pane, has played dual roles in the controversy. On the one hand, it has contributed to illuminating the future environmental impacts of reclamation, by so doing, to providing a momentum to reconsider the project. This has significant meaning that environmental concerns successfully checked the symbolic national project of developmental era through adopting a joint-investigation scheme that guaranteed participation of environmental groups on an equal footing with the government. On the other hand, by limiting the scope and participants of discussion, it fundamentally blocked the possibilities of public debates and deliberative decision-making with full considerations of the political, social, and cultural aspects of the controversy. I have shown that this is due to the realist belief shared by both the developers and the environmentalists in Korea that 'proper' science would disclose the truth. Environmental groups, in particular, were naive in evaluating the role of scientific expertise in the controversy and neglected the political role of the Expert Review Pane as a ritual. In opposition to the realist argument, I have shown through the analysis of the water quality debates concerning the future fresh water lakes that scientific 'facts' were not discovered but constructed through complex negotiations, conflicts, and compromises among related actors. The framing of the controversy as an experts' debate has resulted in the exclusion of an important actor from the discussion. Little attention has been paid throughout the controversy to the very people who have lived in the Saemangeum area for generations and will lose their livelihood all together soon. About 20,000 fishermen are living on the Saemangeum tidal flats.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.22-30
• /
• 2011

Recently, the rising demand for intelligent video surveillance system leads to high-performance face recognition systems. The solution for low-resolution images acquired by a long-distance camera is required to overcome the distance limits of the existing face recognition systems. For that reason, this paper proposes a hardware design of an image resolution enhancement algorithm for real-time intelligent video surveillance systems. The algorithm is synthesizing a high-resolution face image from an input low-resolution image, with the help of a large collection of other high-resolution face images, called training set. When we checked the performance of the algorithm at 32bit RISC micro-processor, the entire operation took about 25 sec, which is inappropriate for real-time target applications. Based on the result, we implemented the hardware module and verified it using Xilinx Virtex-4 and ARM9-based embedded processor(S3C2440A). The designed hardware can complete the whole operation within 33 msec, so it can deal with 30 frames per second. We expect that the proposed hardware could be one of the solutions not only for real-time processing at the embedded environment, but also for an easy integration with existing face recognition system.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.35-44
• /
• 2000

In this paper, we propose a new trajectory model for characterizing segmental features and their interaction based upon a general framework of hidden Markov models. Each segment, a sequence of vectors, is represented by a trajectory of observed sequences. This trajectory is obtained by applying a new design matrix which includes transitional information on contiguous frames, and is characterized as a polynomial regression function. To apply the trajectory to the segmental HMM, the frame features are replaced with the trajectory of a given segment. We also propose the likelihood of a given segment and the estimation of trajectory parameters. The obervation probability of a given segment is represented as the relation between the segment likelihood and the estimation error of the trajectories. The estimation error of a trajectory is considered as the weight of the likelihood of a given segment in a state. This weight represents the probability of how well the corresponding trajectory characterize the segment. The proposed model can be regarded as a generalization of a conventional HMM and a parametric trajectory model. The experimental results are reported on the TIMIT corpus and performance is show to improve significantly over that of the conventional HMM.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.97-102
• /
• 2000

Subband coding is to divide the signal frequency band into a set of uncorrelated frequency bands by filtering and then to encode each of these subbands using a bit allocation rationale matched to the signal energy in that subband. The actual coding of the subband signal can be done using waveform encoding techniques such as PCM, DPCM and vector quantizer(VQ) in order to obtain higher data compression. Most researchers have focused on the error in the quantizer, but not on the overall reconstruction error and its dependence on the filter bank. This paper provides a thorough analysis of subband codecs and further development of optimum filter bank design using vector quantizer. We compute the mean squared reconstruction error(MSE) which depends on N the number of entries in each code book, k the length of each code word, and on the filter bank coefficients. We form this MSE measure in terms of the equivalent quantization model and find the optimum FIR filter coefficients for each channel in the M-band structure for a given bit rate, given filter length, and given input signal correlation model. Specific design examples are worked out for 4-tap filter in 2-band paraunitary filter bank structure. These optimum paraunitary filter coefficients are obtained by using Monte Carlo simulation. We expect that the results of this work could be contributed to study on the optimum design of subband codecs using vector quantizer.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.674-683
• /
• 2010

For the purpose of color reproduction under standard viewing conditions, recently, color display devices have developed for the colorimetric color reproduction. However the real viewing condition of color display devices is quite different from that. Therefore, it is very important for reproduced colors viewed under real conditions to match the color appearance under standard situations. There are various models that can be used to reproduce corresponding colors considering the chromatic adaptation of the human visual system. However neutral point or chromatic adaptation for the luminance level is not enough. In this paper, we propose a model that find adapting white points for the variations of the luminance levels under the same illuminant. This model is modeled by the proportion of Euclidian distance for luminance level. It is the adapting white function of the sigmoid type for surround luminance level. In the model, the optimal coefficients are obtained from the Hunt's experimental result. It is applied in the chromatic adaptation model using the neutral point of the various viewing conditions. And the neutral point can be used as the theoretical standard which determines the reference white of the color display devices.

• Conservation Science in Museum
• /
• v.22
• /
• pp.15-26
• /
• 2019

This study was focused on the three-dimensional convergence modeling that can multilaterally analyze internal and external shapes of the Sam-Chongtong Hand Canon by optical precision scanning optimized for acquiring the surface shape and X-ray CT scanning used for obtaining the internal shape. First, the scanning results were converted by compatible extension, after which three-dimensional deviation analysis was conducted to verify mutual conformities. Accordingly, most (56.98%) deviations between the two scanning models was found be ±0.1mm. This result did not influence registration and merging based on the ICP algorithm. The merged data exhibited the external surface color, detailed shapes, internal width, and structure of the hand canon. The three-dimensional model based on optical surface scanning and X-ray CT scanning can be used for traditional technique interpretation as well as digital documentation of cultural heritage. In the future, it will contribute to deliver accessible scientific information of exhibits for visitors.