• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2001

Due to the friction characteristics of cylinders and the rail of a passenger car, in the elevator actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. To overcome the drawbacks, in this paper, we first try a hybrid controller which switches between a fuzzy logic controller and a PID controller. However, because the hybrid control scheme uses only a single type controller, except the switched layer, the high control performance can not be achieved. To solve this problem, we propose a new type fuzzy hybrid control scheme, which outputs of the output mixer arc controlled by a fuzzy logic. The hydraulic elevator system controlled by inverters has more then one switched layers due to the highly nonlinear characteristics. The proposed fuzzy hybrid control scheme achieves improved control performances by using both controllers with weighted outputs depend on the system status, to achieve improved control performances. The effectiveness of the proposed control scheme arc shown by simulation results, which the proposed fuzzy hybrid control method yields good control performance not only in the zero crossing speed region but also in the overall control region including steady-state region.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.75-82
• /
• 2015

Major corporations and portals have implemented a link server that connects Content Management Systems (CMS) to the physical address of content in a database (DB) to support efficient content use in web-based environments. In particular, a link server automatically connects the physical address of content in a DB to the content URL shown through a web browser screen, and re-connects the URL and the physical address when either is modified. In recent years, the number of users of digital content over the web has increased significantly because of the advent of the Big Data environment, which has also increased the number of link validity checks that should be performed in a CMS and a link server. If the link validity check is performed through an existing URL-based sequential method instead of petabyte or even etabyte environments, the identification rate of dead links decreases because of the degradation of validity check performance; moreover, frequent link checks add a large amount of workload to the DB. Hence, this study is aimed at providing a link server that can recognize URL link deletion or addition through analysis on the B-tree-based Information Identifier count per interval based on a large amount of URLs in order to resolve the existing problems. Through this study, the dead link check that is faster and adds lower loads than the existing method can be performed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.7
• /
• pp.377-392
• /
• 2005

A lot of studies to measure and analyze the system performance have been done in areas such as system modeling, performance measurement, monitoring, and performance prediction since the advent of a computer system. Studies on a framework to unify the performance related areas have rarely been performed although many studies in the various areas have been done, however. In the case of TMO(Time-Triggered Message-Triggered Object), a real-time programming model, it hardly provides tools and frameworks on the performance except a simple run-time monitor. So it is difficult to analyze the performance of the real-time system and the process based on TMO. Thus, in this paper, we propose a framework for the dynamic analysis of the real-time system based on TMO, TDAF(TMO based Dynamic Analysis Framework). TDAF treats all the processes for the performance measurement and analysis, and Provides developers with more reliable information systematically combining a load model, a performance model, and a reporting model. To support this framework, we propose a load model which is extended by applying TMO model to the conventional one, and we provide the load calculation algorithm to compute the load of TMO objects. Additionally, based on TMO model, we propose performance algorithms which implement the conceptual performance metrics, and we present the reporting model and algorithms which can derive the period and deadline for the real-time processes based on the load and performance value. In last, we perform some experiments to validate the reliability of the load calculation algorithm, and provide the experimental result.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.2
• /
• pp.133-139
• /
• 2021

Objective: This study aims to verify the conventional deadlift motions using by two different grips, thereby elucidating the grounds for effective training methods that can minimize the risk of injury. Method: Total of 18 healthy young adults were recruited for this study (age: 25.11±2.19 yrs., height: 175.67±5.22 cm, body mass: 78.5±8.09 kg, 1-RM: 125.75±19.48 kg). All participants were asked to perform conventional deadlift with two types of grips which are overhand grip (OG) and underhand grip (UG). In each grip, participant perform the deadlift with 50% and 80% of the pre-measured 1-RM. A 3-dimensional motion analysis with 8 infrared cameras and 3 channels of EMG was performed in this study. A two-way ANOVA (group × load) with repeated measure was used for statistical verification. The significant level was set at α=.05. Results: There were significant differences in grip type and weight on the right shoulder joint, and only significant difference in grip on the left shoulder joint (p<.05). The hip joint ROM was significantly increased as the weight increased in both types of grips on phase 1, while the ROM of hip joint was significantly decreased as the weight increased only in the case of OG on phase 2 (p<.05). In case of the OG, as the weight, increased significantly increased L1 ROM and L3 ROM were revealed on phase 1 and phase 2, respectively (p<.05). Moreover, as the weight increased, UG revealed significantly decreased L5 ROM on phase 1, while both grips showed significantly increased ROM on phase 2 (p<.05). In addition, the erector spinae and the biceps femoris, which are synergist for the motion, showed a significant difference in both types of grip according to the weight (p<.05). The muscle activity ratio of gluteus maximus/biceps femoris showed a significant difference only in the UG according to the weight (p<.05). Conclusion: In conclusion, beginners might be suggested to use the UG for maintaining the neutral state of the lumbar spine and focus on the gluteus maximus muscle, which is the main activation muscle. For the experts, it may recommend alternative use of the OG and UG according to the training purpose to minimize the compensation effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.488-493
• /
• 2020

The demand for hydrogen, which is considered an environmentally friendly energy source, is increasing, and at the same time, the fuel cell market is increasing continuously. This study aimed to establish a strategy for securing intellectual property rights on fuel cell by-product utilization technology for operating expenditure reduction of hydrogen-powered residential buildings. In this patent analysis, this study investigated Korean, American, Japanese, and European patents filed/published/registered by October 2019 and established a technical classification system and classification criteria through expert discussion. To reduce the operating expenditure of hydrogen-powered residential buildings, intellectual property rights will be improved using systems and methodologies involving cathode-side purified air, product water, and oxygen-depleted air captured with the dead-end mode operation of polymer electrolyte fuel cells.

• Journal of Popular Narrative
• /
• v.27 no.1
• /
• pp.133-185
• /
• 2021

This study is an attempt to connect television drama M, which deals with abortion issues, with theoretical focus such as materiality, relativity, and agency, to understand diffractively as an cartography of agential reality. According to Karen Barard's Agential Realism, Television drama M is a sociocultural phenomenon produced by the agential intra-actions of material-discursive apparatuses such as medical technology, ghost stories and legends, and male-affect. The 1990s repeatedly revealed "hate" through apparatuses such as technology, discourse, and affect, which are directed at women's gendered bodies. The material -discursive practice of plastic surgery and abortion proves that the agential reality surrounding the body is closely intertwined with medical technology, as well as with the genderized hate. Another related material-discursive phenomenon is rediscovery of the legend and fad of the ghost story, which is also produced from the hate of the denaturalized body, which is once again expanded and reproduced. Appearing in this environment of affect, M enacts diffraction, which is based on backlash, lacking posthuman implications for the materialization of the techno-body. M puts humanistic assumptions about "Man" as a universal definition, historically framed and defined in context. But it is not universal and it is gendered. The current time when the political turmoil surrounding medical technology, discourse, and bodily matters is violently intra-acted is the time to carefully account and respond to the alternative definitions of human beings that M has rejected.