• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.3 s.147
• /
• pp.331-339
• /
• 2006

The objective of this paper is to calculate the fatigue strength for upper deck hatch corner insert plate of large container carriers without wave load analysis and global finite element analysis at the initial design stage. Wave load analysis and global F.E. analysis for three container carriers have been performed by GL(Germanischer Lloyd) procedure to propose the equation for hatch corner stress range which is the important factor in fatigue strength calculation. Considering the restraining effect of bulkhead, three types of equation, that is, single tight bulkhead, double tight bulkhead and support bulkhead have been proposed. Using the proposed equations, a simplified fatigue analysis based on GL rules has been performed for two container carriers of which fatigue strength analysis was carried out by GL. From the comparison between fatigue strength result of using the proposed equations and that of GL, it has been found that proposed stress range equations are useful for scantling of upper deck hatch corner insert plates for over 8,000 TEU class container carriers.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.52-54
• /
• 2011

모바일 하버는 해상에서 대형 컨테이너선과 연결 후 고속으로 정밀하게 컨테이너를 상 하역해 부두로 이송하는 신개념 해상 운송수단이며, 이 모바일 하버의 자동 Docking시스템은 파도와 바람의 끊임없이 움직이는 두 부유체를 안전하고 신속하게 측면으로 밀착해 일정 거리를 유지하여 컨테이너의 상 하역을 안전하게 도와주는 장치로서, 자동 Docking시스템의 주요 핵심 시스템을 소개하고자 한다. 부두나 항구에 정박하는 선박들의 안전하고 빠른 계류 활용을 위한 안벽 계류 시스템으로 경인항 부두에 응용한다면 효율적인 항구 운용, 선박 및 여객선의 빠르고 안전한 계류, 신항만 운용 기술의 선구자 역할을 담당할 것으로 사료되며, 적절하고 효과적인 활용방안에 대해 언급하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.45-47
• /
• 2019

과거 국내의 선사들의 주력선대는 8,000TEU급 이었으나, 현재 10,000TEU급 이상 선박의 대형화가 추세이다. 부산항 신항의 경우 2006년 1월 개항당시 4,000~7,000TEU급선박을 대상으로 수심 15m로 항만을 건설하였다. 10,000TEU급 이상의 선박이 안전하게 기항하려면 수심이 최소 16m 이상 확보되어야 하며, 이에 세계적인 컨테이너선 대형화에 발맞춰 수심 17m까지 증심준설 공사를 추진하고 있는 실정이다. 본 연구에서는 조류관측 자료를 토대로 부산항 신항 1-2단계 증심준설에 다른 부산신항만 해역의 하계조류 특성변화를 파악하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.484-493
• /
• 2006

Recently, direct load analysis using ship motion program is required to confirm structural safety for the Post-Panamax class large container carrier. However, there is no exact comparative study data for structural response between 20 and 30 wave load. So, in this paper, to compare the hull girder stress response between 20 versus 3D wave load calculation method, direct load analysis and global F.E analysis have been performed for three kinds of large container vessels using each 20 and 30 wave load calculation program. The results of 2D wave load RAO(Response Amplitude Operator) of each dominant load parameter(vertical, torsional and horizontal moment) are generally bigger than that of 30 results, especially in vertical wave bending moment. And the results of structural analysis based on the equivalent design wave method shows that there is a big difference in view of stress, but the stress distribution is very similar for each wave load case.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.230-237
• /
• 2023

Due to the COVID-19 pandemic and climate change, shortages of essential commodities and resources continue to occur globally. To address this problem, trade volume demand suddenly increased, driving up the freight rate of container ships sharply. The size of container vessels progressively increased from 1,500 TEU (twenty-foot equivalent unit) in the 1960s to 24,400 TEU in 2021. As the improvement of container loading capacity is closely related to the enlargement of the lashing bridge structure, it is necessary to design a structure effective for good container securing and safe under the various external loads that occur during voyage. Major classification societies have recently issued structural-analysis-based guidelines to evaluate the structural safety of lashing bridges, but their acceptance criteria and evaluation methods are different, causing confusion among engineers during design. In this study, the strength change characteristics are summarized by variations in the main variables (modeling range, opening consideration, mesh size) likely to affect the results. Based on this result, the authors propose a reasonable structural-analysis-based evaluation that is expected to serve as a reference in the next revision of classification standards.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.195-199
• /
• 2005

Semi automatic welding method to use carriage for welding at large size block manufacture welding process of present shipbuilding industry is used much. Carriage is device that transfer welding torch in horizontal fillet weld here, but because it is no function that chase welding like robot welding method, use can be impossible in curved line welding, and simply use in straight line welding. Also, because it is no function that chase welding, though welding mistake corrects this happening often in straight line welding, much times and expense are cost. Added welding chase sensor and 80C196KC microcontroller that use strain gauge to carriage that is using present in paper that see hereupon and manufacture a private line model and container box model welding because developing system that can chase welding automatically straight line and curved line welding establishing and investigate about chase phenomenon.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.103-104
• /
• 2023

이 연구는 충돌을 피할 수 없는 상황에서 유지선박의 충돌회피협력 동작 시점을 제시하기 위한 연구다. 관련된 기존 연구에서는 하나의 모델 선박을 본 선박과 상대 선박으로 간주 하였다. 그리고 선박의 항적 계산에 해상상태가 고려되지 않았다. 본 연구는 기존의 연구에서 식별된 한계점을 보완하였다. 선박의 항적은 조류, 파도, 바람을 고려하여 계산 되었고, CNN-LSTM을 통해 충돌 직전 항적을 예측 하였다. 모델선박은 벌크선박, 컨테이너선박을 본 선박으로 지정하였고, 상대 선박은 30미터 요트에서 400미터 대형 컨테이너선까지 고려하여, 다양한 상황에서 유지선박의 충돌회피 협력 동작 시점을 제시 하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.223-227
• /
• 2005

In adjacent sea areas of Yeosu, there are many crossing traffics between eastbound and westbound vessels. Traffic congestion is increasing in sea area of east Sori island and near Yokji Island. In this research, we established TSS near Yeokmando Areas and new recommended route which connected to Seopdo west recommended route to reduce meeting traffic between eastbound vessels and westbound vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.133-137
• /
• 2006

In adjacent sea areas of Yeosu, there are many crossing traffics between eastbound and westbound vessels. Traffic congestion is increasing in sea area of east Sori island and near Yokji Island. In this research, we established TSS near Yeokmando Areas and new recommended route which connected to Seopdo west recommended route to reduce meeting traffic between eastbound vessels and westbound vessels.