• Title/Summary/Keyword: 대형폐기물매립장

Search Result 5, Processing Time 0.016 seconds

The Liquefaction Assessment for Large-sized Waste Landfill Site (대형폐기물 매립지반 액상화 평가)

  • Park, lnn-Joon;Choi, Seung-Ho;Yoo, Byung-Joon;Mha, Ho-Seong
    • Journal of Korean Society of societal Security
    • /
    • v.2 no.2
    • /
    • pp.69-74
    • /
    • 2009
  • The purpose of this research is to assess the aseismic safety for the large-sized waste landfill site based on the results from liquefaction potential analysis. For successful achievement of research, the simplified liquefaction analysis and detailed liquefaction analysis using data from lab test and seismic response analysis are executed. Based on the simplified liquefaction analysis, the possibility of liquefaction is occurred at only BH-14 with maximum acceleration 0.169 g. Therefore, liquefaction possibility of BH-14 is evaluated by the detailed liquefaction analysis again. The safety factor greater than 1.0 from the result of analysis at BH-14 guarantees safety of liquefaction.

  • PDF

도시 고형폐기물의 열분해용융 특성

  • 이협희
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.31 no.9
    • /
    • pp.16-23
    • /
    • 2002
  • 현재 우리나라는 1980년대 후반부터 도시폐기물 소각시설을 설치하기 시작하여 전국적으로 20 여곳의 대형 소각장이 가동되고 있으며 대기오염 방지 기술도 발전에 발전을 거듭하여 불과 10 여년 동안에 선진국 수준의 대기오염 배출기준을 만족하는데 아무 문제가 없을 정도로 되었다. 그러나 소각후 발생 하는 소각재의 경우 비산재는 고형화등의 처리 후 매립하고 바닥재는 별도 처리없이 매립하는 실정이어서 매립 후 시간이 흐를수록 매립된 소각재에서 용출되는 다이옥신과 소각재 중에 포함된 중금속 등에 의한 토양오염과 수질오염의 우려가 남아 있는 것이 사실이다. 소각후 남는 소각재는 폐기물량의 약 15 %, 비산재는 약 1.5 % 정도 발생하는 것으로 볼 때 매립은, 특히 다음 세대에 유산으로 남겨진다는 점에서 더 이상 적절하지 않은 해결책으로 생각되며 유럽과 일본 등 선진국에서는 이미 이와 같은 소각재에 대한 무해화 처리기술이 개발되고 속속 상용화되고 있으므로 우리나라도 하루빨리 열분해용융시설등 신기술을 개발하거나 도입하여 세계적 환경 기술경쟁 에서 선진국과 어깨를 나란히 함은 물론 청정한 국토를 후손에게 물려줄 수 있도록 하는 대책이 강구되어 야 할 것이다. 본 고에서는 폐기물 처리기술의 세계 적 동향을 살펴보고 폐기물의 완전 자원화에 성공한 대우 써모셀렉트 열분해용융 기술의 특성에 대해 소개하고자 한다.

  • PDF

The Influence of Moisture on the Interface Shear Strength Between Geosynthetics (토목섬유의 접촉 전단강도에 대한 함수비의 영향)

  • Seo, Min-Woo;Park, In-Joon;Park, Jun-Boum
    • Journal of the Korean Geotechnical Society
    • /
    • v.20 no.2
    • /
    • pp.75-85
    • /
    • 2004
  • Various geosynthetics are widely installed as a liner or a protective layer of waste landfills. The interface shear strength between the layers of geosynthetics in waste landfills is an important parameter to ensure the safety of bottom and cover system design. In this study, estimations of interface shear strength between geomembrane and geotextile or Geosynthetic Clay Liners (GCL) are performed by large direct shear tests. Especially, this research is focused on the effect of moisture within the interface shear strength between geosynthetics, because most interfaces are vulnerable to rain, leachate and groundwater beneath the liners.

The Slope Stabilization of Solid Waste Landfill Liner System (폐기물매립장의 사면차수체계 안정화 연구)

  • Shin, Eunchul;Kim, Jongin;Park, Jeongjun
    • Journal of the Korean GEO-environmental Society
    • /
    • v.10 no.3
    • /
    • pp.21-28
    • /
    • 2009
  • As the natural aggregates such as sand and clay are getting exhausted, the quantity of utilizing geosynthetics is being increased in the solid waste landfill. Especially, the waste landfills have been constructed at the gorge in the mountainous area and reclaimed land from the sea in the Korean Peninsula. Those areas are not favorable for construction of waste landfill in geotechnical engineering aspect. In this study, the frictional characteristics of geosynthetics that used in the waste landfill were estimated. Then, the studies of the behavior of geosynthetics and stability of LDCRS (Leachate Detection, Collection, and Removal System) of side slope were conducted in the waste landfill by means of the pilot test, and numerical analysis. Geocomposite which is combined type or separated type is influenced on the strain itself, and also implicated in the stress and strain of geomembrane at the lower layer. The strain on the combined type of geocomposite is about 50% smaller than that of the separated type at the side slope. The lateral displacement and settlement of top at the slope with the separated type are three times greater than that of the combined type. In the numerical analysis, discontinuous plans in between ground and geosynthetic, geosynthetic and geosynthetic, goesynthetic and waste have been modeled with the interface element. The results gave a good agreement with the field large-scale model test. The relative displacements of geosynthetics were also investigated and hence the interface modeling of liner system is appropriate for analysis of geosynthetics liner system in the waste landfill.

  • PDF

The Fluid Loss and Sealing Mechanisms in Slurry Trench Condition (I) : A Large Scale Test and Design Procedure (Slurry wall 공법에서 안정액의 역할 (I) : 대형모형실험과 설계절차)

  • Kim, Hak-Moon
    • Journal of the Korean Geotechnical Society
    • /
    • v.18 no.4
    • /
    • pp.239-248
    • /
    • 2002
  • Bentonite slurries in a slurry wall construction must fulfill a stabilizing function by forming impermeable membrane (surface cake and penetrated cake) on the excavated soil faces. Thus problems are occurring in practice for the construction of diaphram walls and cut-off walls with a low permeability for wastes disposal areas in some deep excavations or different grounds. In this paper, the fundamental mechanics of fluid loss and filter cake formation in various soil beds are investigated using large scale laboratory apparatus. The sealing efficiency of filter cake from the large scale tests and the significance of fluid loss in a slurry trench are utilized for practical situation as a recommended design procedure.