• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.558-565
• /
• 2012

Abnormal climate or weather is more frequently reported nowadays due to the global climate change. Especially, extremely low temperature in winter season may cause bad thermal discomfort of passengers. In this study, the effect of car heating modes on cabin temperature change and distribution was studied by using a real-scale environmental chamber for passenger cabin. It was found that the cabin temperature rose quickly at the initial stage of heating system operation, but it stopped increasing after certain point. And, temperature was higher when the height from the floor was higher. Based on the obtained result, the way to minimize the decrease of passengers' thermal comfort was suggested.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.742-747
• /
• 2008

Formaldehyde(HCHO) and total volatile organic compounds(VOCs) can cause adverse health effects to the building occupants and may contribute to symptoms of 'Sick Building Syndrome'. These chemical contaminants are emitted from furnishings and electronic equipments as well as building materials. The purpose of this study is to measure and analyze VOCs and HCHO emission concentration from furnitures composed of wood materials including various chemicals by the large chamber method. This paper presents experiment results on the emission concentration of TVOCs and HCHO released from furnitures, such as bed, kitchen, sofa and table by a large chamber($24m^3$). The temperature and air humidity in the chamber are controlled to $25{\pm}1{\circ}C$ and $50{\pm}5%$ for this experiment. When the air change rate is $0.5hr^{-1}$, the background concentrations within the large chamber are below $50{\mu}g/m^3$ for TVOC, $5{\mu}g/m^3$ for HCHO and individual VOCs. The study is investigated the characterization of the chemical emission TVOC and HCHO concentrations and unknown VOCs from 6 furnitures.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2011

This study was carried out to clarify precise $CO_2$ demands of paprika plants (Capsicum annumm L.) by measuring photosynthesis rates of the leaves in high, low positions, and the $CO_2$ consumption of a whole plant in a large sealed chamber. A photosynthesis measuring system (LI-6400) was used to measure the photosynthetic rates of the leaves located in different positions. A large sealed chamber that can control inside environmental factors was developed for measuring $CO_2$ consumption by a whole paprika plant. With increase of radiation, photosynthetic rates of the leaves in higher position became larger than those in lower position. The $CO_2$ consumption by the plant was estimated by using decrement of $CO_2$ concentration from initial level of 1500 ${\mu}mol{\cdot}mol^{-1}$ in the chamber with increase of integrated radiation. A regression model for estimating $CO_2$ consumption by the plant (leaf area = 7,533.4 $cm^2$) was expressed with integrated radiation (x) and was suggested as $y=-0.06234+3.671^*x/(2.589+x)$ ($R^2=0.9966^{***}$). The photosynthetic rate of the whole plant measured in the chamber was 3.4 ${\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under 300 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity, which is in-between photosynthetic rates of the leaves in high and low positions. For this reason, some differences between required and supplied $CO_2$ amounts in greenhouses might occur when depending too much on photosynthetic rates of leaves. Therefore, we can estimate more accurately $CO_2$ amount required in commercial greenhouses by using $CO_2$ consumption model of a whole plant obtained in this study in addition to leaf photosynthetic rate.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.8-14
• /
• 2015

More and more, spaces are decreasing which satisfy multiple requirements for wind power plants. However, areas which have excellent wind resources and are free to civil complaints occupy a large space, although they are exposed to the cryogenic environment. This study conducted a thermal-fluid analysis of a cryogenic chamber for testing large wind turbine parts exposed to the cryogenic environment. The position of supply air is placed to the upper area to compare each cooling performance for each location of various outlets in mixing ventilated conditions. The study carried out CFD analysis for the chamber both with and without a test object. For the cases without the test object, the air temperature of the upper supply and down extract type chamber was cooled faster by 5-100% than the others. However, for the cases with the test object, the object temperature of upper supply and center extract on the opposite side type chamber was cooled faster by 33-132% than the others. The cooling performance by the air inside the chamber and the test object did not show the same pattern, which implicates the need to consider the cooling performance by not only the air but also the test object in the large cryogenic chamber design for testing large parts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.638-643
• /
• 2013

Nowadays, the hydraulic power unit (HPU) has been increased its working pressure and enlarged its capacity in order to improve the performance of the hydraulic system, but it produces noise leveled around 110dB(A) during operation. Recently, due to the reinforcement of industrial safety regulations and the requirement of improving work environment, a separated HPU room is installed at outside or underground of the building as to reduce the noise from HPU, but there are also problems of power loss owing its fluid friction of pipe system and of deficient accessibility during its failure accident. In this study, experiment is performed to improve the noise characteristics with installing a soundproof chamber to minimize the power loss and exclude effectively the high leveled noise, which is generated during the power conversion of HPU.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.403-416
• /
• 2009

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and developed by KARl for communication, ocean and meteorological observations. It will be tested under vacuum and very low temperature conditions in order to verify thermal design of COMS. The test will be performed by using KARI large thermal vacuum chamber, which was developed by KARI, and the COMS will be the first flight satellite tested in this chamber. The purposes of thermal balance test are to correlate analytical model used for design evaluation and predicting temperatures, and to verify and adjust thermal control concept. KARI has plan to use heating plates to simulate space hot condition especially for radiator panels of satellite such as north and south panels. They will be controlled from 90 K to 273 K by circulating GN2 and LN2 alternatively according to the test phases, while the main shroud of the vacuum chamber will be under constant temperature, 90 K, during all thermal balance test. This paper presents thermal modelling including test chamber, heating plates and the satellite without solar array wing and Ka-band reflectors and discusses temperature prediction during thermal balance test.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.231-241
• /
• 2011

Anoxia Treatment using inert gas like nitrogen and argon has been used to eradicate insects successfully in museums as alternative of methyl bromide and toxic insecticide. Killing efficacy of insect for anoxia treatment is depend on species of insects, oxygen concentration, temperature, relative humidity and gas. It is possible to kill museum insects which are most tolerant in anoxia environment, within 1 month below 0.03% of oxygen concentration in temperature $15{\sim}25^{\circ}C$ and relative humidity 40~60% of museum environment. And various systems like bag, tent, bubble and chamber depending on size and quantity of objects, are used.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.4
• /
• pp.77-87
• /
• 2011

To investigate the effect of drainage spacing and smear on the rate of consolidation and the efficiency of vertical drain method, a series of consolidation tests with a large consolidation chamber and special equipment for inserting mandrels were conducted. As the smeared region increases, total settlement in over-consolidated clay increases whereas apparent change in settlement does not appear in normally consolidated clay. Vertical drain generally accelerates the rate of consolidation, while it could also deteriorate the efficiency of vertical drain method even for the decreasing drainage length and spacing ratio.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.26-33
• /
• 2014

The gas-centerd swirl injectors are widely used on the main combustor of large liquid propellant rocket engines. Since the gas-liquid propellants, such as kerosene and oxygen-rich gas combination, are mixed and burned in the high pressure condition over the critical pressure point, the cold-flow spray test in the atmospheric condition can not represent the actual spray pattern. To observe the near actual spray patterns of gas-centered swirl injector, the high pressure spray chamber and the control system were constructed. The operating sequence was controlled precisely to obtain clear visualization images.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.194-194
• /
• 2010

태양전지용 투명전도막에 사용되는 Al-doped ZnO (AZO) 막은 저가이면서도 가시광역 영역에서 갖는 우수한 투과율과 낮은 비저항을 갖는 특성 때문에 ITO의 대체 재료로서 최근 활발한 연구가 진행되고 있다. 특히, 양산 현장에서는 in-line type의 대형 sputtering system에서 증착하고 있으며 높은 증착 속도와 박막 특성의 균일도가 중요한 과제다. 본 연구에서는 $2\;m\;{\times}\;1\;m\;{\times}\;0.2\;m$의 sputtering system에서 기판 캐리어를 이용해서 커다란 기판을 좁고 긴 타겟의 양쪽으로 왕복 운동을 하는 swing dynamic deposition 방법으로 $272\;mm\;{\times}\;500\;mm$ 크기의 AZO target (Al 2 wt%)을 이용하여 bipolar pulsed dc로 증착하였다. 이 시스템의 배기는 TMP와 cryo pump를 이용해서 $5\;{\times}\;10^{-7}\;Torr$의 기본 진공도를 얻으며, 공정 중에는 TMP만 사용하였다. 하지만, 본 시스템의 TMP는 비대칭 적으로 한쪽에 치우쳐 설치되어 있는데, 이것이 챔버 내에서 공정 가스인 Ar의 유동의 불균일도를 초래하게 되며, 그것이 증착되는 박막의 두께 균일도 및 특성 균일도에 영향을 주고 있음을 알 수 있었다. 본 연구에서는 다른 기본 진공도에서 증착된 AZO 박막의 특성 차이를 알아보고 비대칭 배기 구조가 in-line type 시스템에서 어떠한 두께 및 특성 불균일도를 가져오는지, 그리고 시스템 내부에 발생시키는 압력 불균일도를 상용 3차원 전산 유체해석 프로그램인 CFD-ACE+를 이용하여 분석하였다.