• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.107-115
• /
• 2008

This paper is performed to examine the effect of creep during the primary consolidation and the applicability of the Yin's EVP (Elasto-Visco-Plastic) model. In ordinary consolidation theories using the elastic model, the primary consolidation process can be expressed but the secondary consolidation process cannot. It is due to the viscosity, which can express the secondary consolidation, and is sometimes related to the scale effect (difference of the thickness of clay layer between laboratory sample and field condition) such as hypotheses Type A and Type B shown by Ladd et al. (1977). Usually, the existence of the creep during the primary consolidation has been conformed and the Type B is well acceped. On the other hand, from the large-scaled consolidation tests the intermediate characteristic between Type A and Type B was proposed as Type C by Aboshi (1973). In this study, to clarify the effect of creep on the settlement-time relation during the primary consolidation in detail, Type B consolidation tests were performed using the separate-type consolidation test apparatus for a peat and clay. Then the test results were analyzed by using Yin's EVP Model (Yin and Graham, 1994). In conclusion, followings were obtained. At the end of primary consolidation, the compression for the subspecimens should not be the same because of the difference of the excess pore water pressure dissipation rate. And the average settlement measured by the separate-type consolidometer coincides with the analyzed one using the Yin's EVP model. As for the dissipation of the excess pore water pressure, however, the measured excess pore water pressure dissipates faster compared with the Yin's model.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.99-108
• /
• 2012

These days, spontaneous ignition phenomena by oxidizing heat frequently occur in the circumstances of processing and storing waste tires. Therefore, to examine the phenomena, in this work, this researcher conducted the tests of fires of fragmented waste tires (shredded tire), closely investigated components of the fire residual materials collected in the processing and storing place, and analyzed the temperature of the starting of the ignition, weight loss, and heat of reaction. For the study, this researcher conducted fire tests with fragmented waste tires in the range of 2.5 mm to 15 mm, whose heat could be easily accumulated, and performed heat analysis through DSC and TGA, DTA, DTG, and GC/MS to give scientific probability to the possibility of spontaneous ignition. According to the tests, at the 48-hour storage, rapid increase in temperature ($178^{\circ}C$), Graphite phenomenon, smoking were observed. And the result from the DTA and DTG analysis showed that at $166.15^{\circ}C$, the minimum weight loss occurred. And, the result from the test on the waste tire analysis material 1 (Unburnt) through DSC and TGA analysis revealed that at $180^{\circ}C$ or so, thermal decomposition started. As a result, the starting temperature of ignition was considered to be $160^{\circ}C$ to $180^{\circ}C$. And, at $305^{\circ}C$, 10 % of the initial weight of the material reduced, and at $416.12^{\circ}C$, 50 % of the intial weight of the material decreased. The result from the test on oxidation and self-reaction through GC/MS and DSC analysis presented that oxidized components like 1,3 cyclopentnadiene were detected a lot. But according to the result from the heat analysis test on standard materials and fragmented waste tires, their heat value was lower than the basis value so that self-reaction was not found. Therefore, to prevent spontaneous ignition by oxidizing heat of waste tires, it is necessary to convert the conventional process into Cryogenic Process that has no or few heat accumulation at the time of fragmentation. And the current storing method in which broken and fragmented materials are stored into large burlap bags (500 kg) should be changed to the method in which they are stored into small burlap bags in order to prevent heat accumulation.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.719-727
• /
• 2010

Reduced irradiance promotes shoot elongation depending on developmental stage and environmental factors and decreases plant quality in $Cyclamen$ $persicum$ Mill. To determine the petiole elongation responses to low irradiance, 'Metis Scarlet Red' cyclamen at different developmental stages [juvenile (5-6 unfolded leaves), transitional (1-3 visible flower buds), or mature (1-3 elongating peduncles)] was grown in growth modules at 60 (low light, LL) or 240 (high light, HL) ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD within the growth chambers at different temperatures [16/12 (low temperature, LT), 22/18 (medium temperature, MT), or 28/$24^{\circ}C$ (high temperature, HT) (day/night)]. In Experiment I, juvenile plants were either kept in an LL or HL module during the entire treatment of 4 weeks or were transferred to the other module at 1, 2, or 3 weeks after treatment in an MT chamber. In Experiment II, juvenile, transitional, or mature plants were moved to the HL module at 0, 3, 6, 9, or 12 days after being placed in the LL module at the MT chamber and grown for 21 days. In Experiment III, transitional plants were moved to the HL module at 0, 3, 6, 9, or 12 days after being placed in the LL module at the LT, MT, or HT chambers. As the exposure duration to LL increased from 0 to 4 weeks or from 0 to 12 days, petiole length and plant height increased at all temperatures and developmental stages. In Experiment I, the exposure to LL during the latter period, rather than the early period, increased elongation rate. In Experiment II, petiole elongation in transitional plants was more sensitive to LL than juvenile or mature plants during the early period of the treatment for 12 days. In Experiment III, petiole length increased with increasing temperature and exposure duration to LL. Petiole elongation rate at HT increased rapidly from the beginning of LL exposure as compared to LT. Increase of $6^{\circ}C$ in temperature had the similar effect to LL exposure for 3 days in petiole elongation. To conclude, transitional cyclamen under higher temperatures responds more immediately to low irradiance and elongates its petioles.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.661-672
• /
• 2012

Lab scale experiments to investigate the dissolution reaction among supercritical $CO_2$-sandstone-groundwater by using sandstones from Gyeongsang basin were performed. High pressurized cell system (100 bar and $50^{\circ}C$) was designed to create supercritical $CO_2$ in the cell, simulating the sub-surface $CO_2$ storage site. The first-order dissolution coefficient ($k_d$) of the sandstone was calculated by measuring the change of the weight of thin section or the concentration of ions dissolved in groundwater at the reaction time intervals. For 30 days of the supercritical $CO_2$-sandstone-groundwater reaction, physical properties of sandstone cores in Gyeongsang basin were measured to investigate the effect of supercritical $CO_2$ on the sandstone. The weight change of sandstone cores was also measured to calculate the dissolution coefficient and the dissolution time of 1 g per unit area (1 $cm^2$) of each sandstone was quantitatively predicted. For the experiment using thin sections, mass of $Ca^{2+}$ and $Na^+$ dissolved in groundwater increased, suggesting that plagioclase and calcite of the sandstone would be significantly dissolved when it contacts with supercritical $CO_2$ and groundwater at $CO_2$ sequestration sites. 0.66% of the original thin sec-tion mass for the sandstone were dissolved after 30 days reaction. The average porosity for C sandstones was 8.183% and it increased to 8.789% after 30 days of the reaction. The average dry density, seismic velocity, and 1-D compression strength of sandstones decreased and these results were dependent on the porosity increase by the dissolution during the reaction. By using the first-order dissolution coefficient, the average time to dissolve 1 g of B and C sandstones per unit area (1 $cm^2$) was calculated as 1,532 years and 329 years, respectively. From results, it was investigated that the physical property change of sandstones at Gyeongsang basin would rapidly occur when the supercritical $CO_2$ was injected into $CO_2$ sequestration sites.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.441-451
• /
• 2017

The present study was conducted from August to December 2016 in a cylindrical water tank with a diameter of 1 m, a height of 4 m and a capacity of 3,000 L. The field water and sediment from the Nakdong River were also sampled for the experimental culture (field water+sediment) and control culture (field water), respectively. In this study, we aimed to investigate phytoplankton succession pattern using the phytoplankton functional group in the enclosed culture system. A total of 50 species in 27 genera including Chlorophyceae (30 species), Bacillariophyceae (11 species), Cyanophyceae (7 species), and Cryptophyceae (2 species) were identified in the experimental and control culture systems. A total of 19 phytoplankton functional groups (PFGs) were identified, and these groups include B, C, D, F, G, H1, J, K, Lo, M, MP, N, P, S1, $T_B$, $W_0$, X1, X2 and Y. In particular, $W_0$, J and M groups exhibited the marked succession in the experimental culture system with higher biovolumes compared to those of the control culture system, which may be related to the internal cycling of nutrients by sediment in the experimental culture system. The principal component analyses demonstrated that succession patterns in PFG were associated with the main environmental factors such as nutrients(N, P), water temperature and light intensity in two culture systems. In conclusion, the present study showed the potential applicability of the functional group for understanding the adaptation strategies and ecological traits of the phytoplankton succession in the water bodies of Korea.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.70-75
• /
• 1998

A model of pond system is developed for treatment and recycling of excreta from twenty-five adult dairy cattle. It is composed of wastewater treatment ponds and small fish ponds. Those are three facultative ponds in series; primary-secondary-tertiary pond and these are designed to rear carps without feeding. A pit is constructed at the bottom of primary pond for efficient sludge sedimentation and effective methane fermentation. It is contrived to block into it the penetration of oxygen dissolved in the upper layer of pond water. The excreta from the cattle housed in stalls are diluted by water used for clearing them. The washed excreta flow into the pit. The average yearly $BOD_5$ concentration of influent is 398.7mg/l. That of the effluent from primary, secondary and tertiary pond of the system is 49.18, 27.9, and 19.8.mg/l respectively. Approximate 88, 93, and 95 % of BOD5 are removed in each pond. The mean yearly SS concentration of influent is 360.5 mg/l That of the effluent from each pond is 53.4, 45.7, and32.7mg/l respectively. Approximate 86, 88, and 91% of SS are removed in each pond. The $BOD_5$ concentration of secondary and tertiary pond can satisfy 30mg/l secondary treatment standard. The SS concentration of effluent from tertiary pond, however, is slightly greater than the standard, which results from activities of carps growing in the pond. The average yearly total nitrogen concentration of influent is 206.8mg/l and that of the effluent from each pond is 48.6, 30.8, and 21.0mg/l respectively. Approximate 74, 88, and 90% of total nitrogen are removed in each pond. The mean yearly total phosphorous concentration of influent is 20.7mg/l and that of the effluent from each pond is 5.3, 3.2, and 2.1mg/l respectively. Approximate 97, 98, and 99% of total phosphorous are removed in each pond. The high removal of nitrogen and phosphorous results from active growth of algae in the upper layer of pond water. Important pond design parameters for southern part of Korea -- areal loading of BOD5, liquid depth, hydraulic detention time, free board, and pond arrangement -- are taken up.

• Korean Journal of Environmental Biology
• /
• v.26 no.1
• /
• pp.30-35
• /
• 2008

In order to investigate whether or not CCD-986sk cell line can be affected by Korean Ecklonia stolonifera Okamura, we examined the MTT assay when we treated Korean Ecklonia stolonifera Okamura extract in CCD-986sk human fibroblast cell line. The sample were tested for cell proliferation activity by means of a modification of the MTT assay. Ecklonia stolonifera Okamura extract showed significantly strong cell proliferation activity at the range of from 6.25 mg $mL^{-1}$ to 1.56 mg $mL^{-1}$ compared with control group. And in order to search for inhibition agents of skin melanin formation, we tested for inhibition effect of melanin pigmentation of Korean Ecklonia stolonifera Okamura using Clone M-3 mouse melanocyte cell lines. when we treated the extracts of Ecklonia stolonifera Okamura to the mouse melanocyte cell lines, the sample showed a significantly little formation of melanin pigments compared with control group at the only range of 200 mg $mL^{-1}$. These results suggest that extract of Korean Ecklonia stolonifera Okamura may represents an excellent candidate for inhibition of melanin pigmentation and for protection of human skin aging at in vitro level.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.659-666
• /
• 2012

To secure the thermal crack resistance of mass concrete, researches and the field applications of low heat portland cement (LPC), ternary blended cement (TBC) which is produced by blending ordinary portland cement with blast furnace slag and fly ash, and early strength low heat blended cement (EBC) increased in recent years. Although the model for adiabatic temperature rise is necessary for estimating the risk of thermal cracking of concrete structures, sufficient data have not been accumulated for these mixtures. In addition, the differences in adiabatic test results have been reported for the volume of test specimens. Therefore, the present study evaluated the characteristics of adiabatic temperature rise based on the type of binder and the volume of the adiabatic test specimen. Test results indicated that the maximum temperature rise ($Q_{\infty}$) and the reaction factor (r) of TBC were the lowest. Test results also showed that $Q_{\infty}$ and r changed with respect to the volume of test specimen. $Q_{\infty}$ and r obtained from 6l equipment were lower than those of 50l equipment. Therefore, corrections with respect to this phenomenon was confirmed and the corrections factors are presented.

• Korean journal of applied entomology
• /
• v.15 no.4 s.29
• /
• pp.199-204
• /
• 1976

Canna nosaic X bodies, which do not exist in tissues of the healthy plant and are originating in cells of virus infected Canna (Canna generalis BAILEY) with mosaic symptom, are easily observed under microscope through application of vital staining for 2-3 minutes with $1\%$ eosin of $H_2O$ solution added with slight amount of $CH_3COOH$ and distinguishing with N/5HCl followed by washing to inspect. The result of this experiment is summarized as following: 1) The X bodies are observed not only in epiermal cells of leaf of the mosaic virus infected Canna but in those of leaf sheath, stem, and root also, and it is expected that the X bodies are to exist in the flower cells of the disease infected Canna which were missed in this experiment. 2) Shape and nature of X bodies are not constant; in early stage of the disease development, the X bodies have equal contents and vague contour with their small size and round shape, but along with progress of the disease development they attain granular contents and clear contour with their increasing sige and defining shape in cytoplasm. In case of same individual pant, fully developed X. bodies. are increasing in cytoplasm in propoition to severity of mosaic and nettling of the diseased leaf. 3) The staining character of X bodies to eosin is more dense than that of nuclei; Xbodies are stained light red or red while nuclei are stained yellowish brown or light red. 1) It is assumed to be a result of cytoplasmic concentration around nucleus that X bodies are usunlly developed adjacent to nucleus and they are considered to be a cytoplasmic prodct. 5) Thus, I confirm that X bodies originsting in canna plant cells infected with mosaic virus aye multipling in the alive cells.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.77-85
• /
• 2020

Currently, life-cycle cost analysis methods are introduced to maintain large infrastructure facilities in Korea. However, there are not many cases in which maintenance models are applied that reflect conditions such as the location of a facility and its surroundings. In order to establish an appropriate maintenance strategy, a cost prediction, deterioration model, and a decision model reflecting uncertainty should be established. In this study, an economic analysis model was developed for long-term cost planning and management based on user decisions based on maintenance methods and judgment criteria for painting specifications applied to power generation structures. The performance of the paintwork was assessed through the paint deterioration test for the application of the economic analysis model, and the results of the economic analysis according to the applied paint specifications (Urethan, polysiloxane, fluorine) were verified by applying the proposed economic analysis model. In this study, it is believed that the selection of the repair cycle and evaluation methods applied with the development model rather than the performance of the painting can be expected to be used as basic data for the maintenance cycle, even if it is not limited to the painting.