• Journal of the Korean housing association
• /
• v.28 no.2
• /
• pp.23-33
• /
• 2017

This study was aimed to assess accessibility situation of pedestrian environment of University-C focusing on accessibility of manual wheelchair users and to develop accessibility campus map. During March and April 2016, barrierfree design application situation of pedestrian environment and building entrances were investigated using a structured checklist and a digital distance and slope meter. Major findings are as follow. (1) Except one case, widths of all pedestrian routes (both sidewalk and non-sidewalk routes) exceeded 2 meters. (2) As for sidewalk and driveway contact point condition, there were many spots lacking curb ramp or alterative ramp that are accessible for manual wheelchair users. (3) More than half of non-sidewalk pedestrian routes did not have bollard to separate pedestrian and vehicle flows, and more than 92% of the bollards installed were too close for wheelchair users to pass or too far to prevent vehicle access. (4) More than 59 percent of the building entrances were found impossible for manual wheelchair users to access without any assistance, and one third of the buildings did not have any single accessible entrance. Based on the study findings, campus accessibility map was developed by the researchers and disseminated through university homepage. Using the campus accessibility map, users can plan their accessible paths ahead the trip.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.788-805
• /
• 2010

The present USN (Ubiquitous Sensor Networks) node deployment practices have many limitations in terms of positional connectivity. The aim of this research was to minimize a redundancy of USN route nodes, by integrating spatially weighted parameters such as visibility, proximity to cell center, road density, building density and cell overlapping ratio into a comprehensive GIS database. This spatially weighted approach made it possible to reduce the number of route nodes (11) required in the study site as compared to that of the grid network method (24). The field test for RSSI (Received Signal Strength Indicator) indicates that the spatially weighted deployment could comply with the quality assurance standard for node connectivity, and that reduced route nodes do not show a significant degree of signal fluctuation for different site conditions. This study demonstrated that the spatially weighted deployment can be used to minimize a redundancy of USN route nodes in a routine manner, and the quantitative evidence removing a redundancy of USN route nodes could be utilized as major tools to ensure the strong signal in the USN, that is frequently encountered in real applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.263-268
• /
• 2019

This article intends to shed a light on the British architect Arthur S. Dixon (1856-1929). He is largely regarded as a pioneer of the English Art and Craft Movement, yet his works are not widely known nor carefully studied. In search of Dixon's architectural characteristics, this paper examined three notable buildings that he designed at the turn of the nineteenth century; Birmingham Guildhall, St. Andrews church and St. Basil's Church. These buildings were erected relatively early in his career as an architect, although he never fully immersed into the profession due to his commitment in family business management. His architectural design shows unique qualities of Art and Craft movement in terms of use of material, spatial arrangement, techniques, and craftsmanship while employing Romanesque as most relevant historic style for ecclesiastical purposes.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.69-74
• /
• 2018

The road name address is a two-dimensional location marking method for naming each road and assigning a number to each building. However, the road name address only shows the necessary parts for administrative and legal acts, and it does not properly display the main characteristics of various roads and non-residential areas. This has become more and more difficult to standardize different location identification methods, merely as a separate location identification method. This paper proposes road-based 3D location identification code to overcome the difficulties of integrating different location identification methods in Korea and to overcome the limit of 2D plane. This is a method to integrate various location identification methods based on roads and to identify spatial coordinates. It is a study on 3D digital coding of the land suitable for the 4th Industrial Revolution era.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.37-47
• /
• 2019

The study purposed to investigate the optimal location of core and offset outrigger system considering floor diaphragm. To accomplish this aim, a structure design of 70 stories building was performed by using MIDAS-Gen. And the leading factors of the analysis research were the slab stiffness, the stiffness of shear wall and the outrigger position in plan. Based on the analysis results, we analyzed and studied the influences of the shear wall stiffness and the slab stiffness on optimal location of core and offset outrigger considering floor diaphragm. The results of the analysis study indicated whether the slab stiffness, the stiffness of shear wall and the outrigger position in plan had an any impact on optimal location in outrigger system of tall building. Also the paper results can give help in getting the structural engineering materials for looking for the optimal position of outrigger system in the high-rise building.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.590-595
• /
• 2020

In this study, the small-scale collision experiments using a pendulum principle were carried out to evaluate the safety of the reinforced concrete building selected as a tsunami evacuation building due to the collision of the waterborne debris represented by ships. The experimental parameters were set as impact velocity, mass and length of the drifted ship. In this paper, the maximum impact force, impact duration, impact waveform and restitution coefficient affecting building response were investigated in detail. As a result, the impact force waveforms were distributed as a triangle in most of the experimental results, but became closer to a trapezoid as the length of the collision specimen increased. This is the very important result in calculating the momentum (impact waveform area) affecting building response, Furthermore, the restitution coefficients were constant regardless of the impact velocity, but they varied depending on the mass and length of the waterborne debris. However, the restitution coefficient for the mass per unit length of the waterborne debris can be evaluated.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.113-129
• /
• 2022

A building's eco-friendliness is directly related to various values including the life cycle cost of a building. However, the conventional architectural design method has a limitation in that it cannot create an optimized case according to the surrounding environmental conditions. Therefore, the purpose of this research is to present a design assistance tool that can review planning cases optimized for the environmental conditions of the building site in the planning stage of architectural production. To achieve the purpose of the study, an algorithm for realizing 3D modeling of the region and analysis of the solar environment was produced based on the site contours, building, and road information from the digital topographic map provided by the National Geographic Information Institute. To examine the validity of the developed algorithm, a comparative experiment was conducted targeting the elevation direction of the existing building. As a result, it was found that the optimal elevation direction selected by the algorithm can receive higher insolation compared to the front facade of the main building.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.286-291
• /
• 2022

The effect of root-zone local cooling on seedling growth of tomato was investigated. Lower pipe cooling was used for local cooling of the root zone, and the root zone temperature was set at 20 and 25℃. There was no difference in plant height, root length, and leaf number according to local cooling temperature. Leaf area, fresh weight, dry weight, and chlorophyll content of the shoot and root was higher in the 25℃ than those of 20℃ at 28 DAS. These results showed that cooling for seedling growth of tomato 25℃ is sufficient considering energy efficiency. This study will be helpful in the development of local cooling technology that can reduce the energy required for cooling during the production of tomato seedlings in the high temperature season.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.1-11
• /
• 2021

The research intended to understand the lateral behavior in core and offset outrigger system. To achieve this goal, a structural analysis and design of 70 stories building was carried out by making use of MIDAS-Gen. And the primary parameters of this analysis were the stiffness of outrigger and the location of outrigger in plan. On the basis of the analysis results, we analyzed the lateral behavior of structural elements such as slab, outrigger and exterior columns in core and offset outrigger. In this analysis research, it is indicated that the stiffness of outrigger and the outrigger location in plan had an any impact on lateral behavior in outrigger system of tall building. Specially, slab stresses in core outrigger system were highly distributed in the slab near the outrigger system to connect shear walls and exterior columns while slab stresses in offset outrigger system were highly distributed in the slab between the outrigger system and shear walls. Also the study results can be of significant help to obtaining the engineering data for the reasonable structure design of the high-rise outrigger system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.70-73
• /
• 1988

The changes of kernel size, contents of moisture and total sugar, and rates of flavor and stickiness of a waxy corn (cv. Hongcheon native) were observed from 15 days after silking (DAS) to 40 DAS at Suwon and Cheongju in 1984, nespectively. Fresh kernel length and width greatly increased from 15 DAS to 30 DAS and slightly increased thereafter. Fresh 100-kernel weight was markedly increased during 15 DAS to 30 DAS, and slightly and continuously increased thereafter while dry 100-kernel weight almost linearly increased with maturity. Total sugar content of fresh kernel was the highest at 20 DAS and then continuously decreased with maturity. Flavor and stickiness rates of boiled waxy corn were significantly increased during 15 DAS to 30 DAS and flavor rate decreased thereafter. However, stickiness rate maintained the level until 35 DAS and then decreased slightly. The optimum harvest date for fresh waxy corn seems to be about 30 DAS considering kernel size, and flavor and stickiness rates of boiled corn.