• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.178-180
• /
• 2020

기존의 철도차량용 무선전력전송 시스템은 Medium-voltage (MV) 60 Hz 중전압 AC 계통 전압을 Low-voltage (LV) DC로 변환하기 위해 저주파 변압기와 정류기를 사용한다. 하지만 수 MW급의 대전력을 낮은 DC 전압으로 전송하려면 인버터는 수백 A - 수 천 A 이상의 전류용량을 가져야하므로 정류기의 출력 단에 직렬 또는 병렬로 연결된 여러 개의 고주파 변압기를 필요하게 된다 (그림 1참조). 이러한 저주파 변압기, 정류기 및 고주파 변압기는 크고 무거우므로 낮은 전력밀도 및 높은 시스템 가격의 원인이 된다. 본 논문에서는 이러한 저주파변압기, 정류기, 고주파 변압기를 사용하지 않는, 여자 코일을 이용한 새로운 멀티레벨 무선전력전송 시스템의 토폴로지를 제안한다. 제안된 멀티레벨 무선전력전송 시스템은 멀티레벨 인버터의 각 출력 단에 여자코일 (excitation coil) 이 연결되어 있다. 이 여자코일들은 급전코일 (transmitter coil) 에 전기적으로는 절연되었지만 자기적으로 강하게 결합된다. 여자코일들이 발생시킨 자기장은 급전코일에 유도전압을 발생시키고, 급전코일에서 수백 A 이상의 큰 전류를 흐르게 하여 급전코일에서 강한 자기장을 발생하도록 한다. 이 자기장은 급전코일과 수 cm 이상 떨어져 자기적으로 약하게 결합된 집전코일 (receiver coil) 에 다시 유도전압을 발생시켜 전력을 전달하게 된다. 제안한 새로운 멀티레벨 무선 전력 전송 시스템은 시뮬레이션을 통해 검증했다.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.220-239
• /
• 2019

According to the National Currency (國幣) article in GyeongGukDaeJeon (經國大典), the ChoSonT'ongPaeJiIn (朝鮮通幣之印) was a seal that was imprinted on both ends of a piece of hemp fabric (布). It was used for the circulation of hemp fabric as a fabric currency (布幣). The issued fabric currency was used as a currency for trade or as pecuniary means to have one's crime exempted or replace one's labor duty. The ChoSonT'ongPaeJiIn would be imprinted on a piece of hemp fabric (布) to collect one-twentieth of tax. The ChoSonT'ongPaeJiIn (朝鮮通幣之印) was one of the historical currencies and seal materials used during the early Chosun dynasty. Its imprint was a means of collecting taxes; hence, it was one of the taxation research materials. Despite its value, however, there has been no active research undertaken on it. Thus, the investigator conducted comprehensive research on it based on related content found in JeonRokTongGo (典錄通考), Dae'JeonHu-Sok'Rok (大典後續錄), JeongHeonSwaeRok (貞軒?錄) and other geography books (地理志) as well as the materials mentioned by researchers in previous studies. The investigator demonstrated that the ChoSonT'ongPaeJiIn was established based on the concept of circulating Choson fabric notes (朝鮮布貨) with a seal on ChongOseungp'o (正五升布) in entreaty documents submitted in 1401 and that the fabric currency (布幣) with the imprint of the ChoSonT'ongPaeJiIn was used as a currency for trade, pecuniary or taxation means of having one's crime exempted, or replacing one's labor, and as a tool of revenue from ships. The use of ChoSonT'ongPaeJiIn continued even after a ban on fabric currencies (布幣) in March 1516 due to a policy on the "use of Joehwa (paper notes)" in 1515. It was still used as an official seal on local official documents in 1598. During the reign of King Yeongjo (英祖), it was used to make a military service (軍布) hemp fabric. Some records of 1779 indicate that it was used as a means of taxation for international trade. It is estimated that approximately 330 ChoSonT'ongPaeJiIn were in circulation based on records in JeongHeonSwaeRok (貞軒?錄). Although there was the imprint of ChoSonT'ongPaeJiIn in An Inquiry on Choson Currency (朝鮮貨幣考) published in 1940, there had been no fabric currencies (布幣) with its imprint on them or genuine cases of the seal. It was recently found among the artifacts of Wongaksa Temple. The seal imprint was also found on historical manuscripts produced at the Jikjisa Temple in 1775. The investigator compared the seal imprints found on the historical manuscripts of the Jikjisa Temple, attached to TapJwaJongJeonGji (塔左從政志), and published in An Inquiry on Choson Currency with the ChoSonT'ongPaeJiIn housed at the Wongaksa Temple. It was found that these seal imprints were the same shape as the one at Wongaksa Temple. In addition, their overall form was the same as the one depicted in Daerokji (大麓誌) and LiJaeNanGo (?齋亂藁). These findings demonstrate that the ChoSonT'ongPaeJiIn at Wongaksa Temple was a seal made in the 15th century and is, therefore, an important artifact in the study of Choson's currency history, taxation, and seals. There is a need for future research examining its various aspects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.62-67
• /
• 2011

Nanoparticles-coated and impact-damaged carbon-fiber reinforced plastics(CFRP) laminates were tested under compression-after-impact(CAI) mode and the propagation of damage due to compressive loading has been monitored by acoustic emission(AE). The impact damage was induced not by mechanical loading but by a simulated lightning strike. CFRP laminates were made of carbon prepregs prepared by coating of conductive nano-particles directly on the fibers and the coupons were subjected to simulated lightning strikes with a high voltage/current impulse of 10~40 kA within a few microseconds. The effects of nano-particles coating and the degree of damage induced by the simulated lightning strikes on the AE activities were examined, and the relationship between the compressive residual strength and AE behavior has been evaluated in terms of AE event counts and the onset of AE activity with the compressive loading. The degree of impact damage was also measured in terms of damage area by using ultrasonic C-scan images. From the results assessed during the CAI tests of damaged CFRP showed that AE monitoring appeared to be very useful to differentiate the degree of damage hence the mechanical integrity of composite structures damaged by lightning strikes.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.121-127
• /
• 2016

This study analyzed the structural and electrical characteristics of an iron fittings type Corrugated Stainless Steel Tubing (CSST) damaged by the Primary Current Injection Test System (PCITS). CSST consists of cladding, tube, nuts, clamp ring, flare cap, socket, and ball valve. For an evaluation of the dielectric withstand voltage, the area between the live part and non-live part of the CCST shall withstand a voltage of 220 V AC for one minute. For an evaluation of the insulation performance by 500 V DC, it is required that the insulation exceed more than $1M{\Omega}$ before the temperature rise test, $0.3M{\Omega}$ after the test. Although the average resistance of the product was $11.5m{\Omega}$, that of the product damaged at a current of 130 A by the PCITS was $11.50m{\Omega}$. Furthermore, parts of the cladding were melted and black smoke appeared when a current of 130 A applied for 10 s. After 60 s, most parts were heated and turned red. At 120 s, the parts that turned red had widened. Although it did not form a normal distribution because the P value was 0.019 with a confidential interval of 95%, it revealed outstanding characteristics with an AD (Anderson-Darling) value of 0.896 and a standard deviation of 0.5573.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.29-33
• /
• 2004

In this paper, we took the basic experiment in order to explore the characteristics of optical CT(optical current transformer) for measuring high current in a superhigh voltage condition using faraday effect and wrote that. We used the 1,310[nm] Laser Diode for the source of light and PIN-Photodiode for receiver. The transmission line of light was composed of the single-mode fiber of 30[m] which could maintain the state of polarization in the optical fiber. The range of current was from 400[A] to 1300[A]. In addition, the temperature ranged from $20[^{\circ}C}]\;to\;50[^{\circ}C]$. In a same experiment condition, a power magnitude increases in proportion as input current is increasing and temperature become low. The maximum ratio of error in temperature of $50[^{\circ}C]$ appears 0.15[%] and the 0.16[%], 1.24[%] and 0.07[%] is ratio of error in respectively $40[^{\circ}C],\;30[^{\circ}C],\;and\;20[^{\circ}C]$.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.171-186
• /
• 2009

Various Earth-Moon transfer trajectories are designed and analyzed to prepare the future Korea's Lunar missions. Minimum fuel trajectory solutions are obtained for the departure year of 2017, 2020, 2022, and every required mission phases are analyzed from Earth departure to the final lunar mission orbit. N-body equations of motion are formulated which include the gravitational effect of the Sun, Earth and Moon. In addition, accelerations due to geopotential harmonics, Lunar J2 and solar radiation pressures are considered. Impulsive high thrust is assumed as the main thrusting method of spacecraft with launcher capability of KSLV-2 which is planned to be developed. For the method of injecting a spacecraft into a trans Lunar trajectory, both direct shooting from circular parking orbit and shooting from the multiple elliptical intermediate orbits are adapted, and their design results are compared and analyzed. In addition, spacecraft's visibility from Deajeon ground station are constrained to see how they affect the magnitude of TLI(Trans Lunar Injection) maneuver. The results presented in this paper includes launch opportunities, required optimal maneuver characteristics for each mission phase as well as the trajectory characteristics and numerous related parameters. It is confirmed that the final mass of Korean lunar explorer strongly depends onto the initial parking orbit's altitude and launcher's capability, rather than mission start time.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.573-579
• /
• 2019

The purpose of this study is predicted easily the entrance surface dose (ESD) in chest digital radiography. We used two detector type such as flat-panel detector (FP) and IP (Imaging plate detector). ESD was measured at each exposure condition combined tube voltage with tube current using dosimeter, after attaching on human phantom, it was repeated 3 times. Phantom images were evaluated independently by three chest radiologists after blinding image. Dose-area product (DAP) or exposure index (EI) was checked by Digital Imaging and Communications in Medicine (DICOM) header on phantom images. Statistical analysis was performed by the linear regression using SPSS ver. 19.0. ESD was significant difference between FP and IP($85.7{\mu}Gy$ vs. $124.6{\mu}Gy$, p=0.017). ESD was positively correlated with image quality in FP as well as IP. In FP, adjusted R square was 0.978 (97.8%) and linear regression model was $ESD=0.407+68.810{\times}DAP$. DAP was 4.781 by calculating the $DAP=0.021+0.014{\times}340{\mu}Gy$. In IP, adjusted R square was 0.645 (64.5%) and linear regression model was $ESD=-63.339+0.188{\times}EI$. EI was 1748.97 by calculating the $EI=565.431+3.481{\times}340{\mu}Gy$. In chest digital radiography, the ESD can be easily predicted by the DICOM header information.