• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2543-2551
• /
• 1997

This paper proposes a compression technique of image data, a variable length PN code and channel models which are required in CDMA communication system. It also analyzes their performances. Original images is compressed by 2-D DCT and its coefficients are quantized by optimal quantizer at compression rate 0.84bit/pel. Channel model 1 and 2 which are composed of 5 and 4 channels respectively are employed to be used in CDMA. Such a situation forces us to empoly variable length PN code, such as Chebyshev map for spread spectrum system. When average PN code length of model 1 and 2 is 44.4 and 26.7 chips respectively, the received image through these models under Gaussian noise with variance 1.75 is visually of the same quality as the transmitting image. Thus, the model 2 appears to be better in channel efficiency, comparing with channel model 1 and channel model which uses fixed length PN code.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.783-790
• /
• 2018

The frequency-hopping technique is one of the spread-spectrum techniques. Frequency hopping is a communication system in which the carrier frequency channel is hopped within the wideband. Therefore, a frequency-hopping system has such advantages as antijamming and low probability of intercept. This system is often used in military communications. Because frequency-hopping signal detection is difficult, it is an important research issue. A novel detection technique is proposed that can improve detection probability. When the received signal is transformed to a frequency domain sample by fast Fourier transform, spectral leakage lowers the detection probability. This problem can be solved by using the Hamming window, and the detection probability can be increased. However, in a frequency-hopping environment, the windowing technique lowers the detection probability. The proposed method solves this weakness. The simulation results show that the proposed detection technique improves the detection probability by as much as 13 %.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.407-412
• /
• 2014

In this paper, we propose an underwater acoustic communication of FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) system with multiple orthogonal property. Generally, the processing of FSK(Frequency Shift Keying) method is simple, but it is vulnerable to ISI (Inter-Symbol Interference) caused by multipath transmission. In this paper, the orthogonal codes are generated with the same number of transmitting symbols, and these codes are corresponding to multiple frequencies. We used m-sequence to generate multiple orthogonal codes. We compared the performance of proposed method with conventional MFSK method via the experiment. As a result, we confirmed that the proposed method shows 6~10 % lower error rate at 100 bps than conventional method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.161-166
• /
• 1999

The global trends of mobile communication system is moving toward digitizing, high-speed and large-capacity. Also, to utilize the limited frequency-resource efficiently, spread spectrum system is a mainstream. In this study we are concerning with the fast frequency-hopping system. Instead of the PLL with many problems such as phase-noise, we used the DDS is popular in these days minimizes the disadvantage of PLL. In the case the FFH system is designed using the PLL, it is difficult to be satisfied of the design conditions such as RF badwidth and the settling time of PLL, and it has limitation because of complex circuit by using the balanced modulator. In this study, we evaluated the performance in order to design the FFH system using the DDS. The system that has the improvement of error rate, 1Mhps hopping rate and 5MHz RF bandwidth is designed and evaluated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.641-655
• /
• 1992

In this paper, the performance of the various multiple accesstechniques for the mobile computer network has been studied in the consideration of the characteristics. Of the mobile communication channel. In the case of the hidden node occurring, it could be seen that the performance of the code division multiple access(CDMA) technique. With simultaneous access function is better than that of the other packet access methods such as carrier sensed multiple access(CAMA). Busy tone mulitiple access(BTMA)and idle signal muitiple access(ISMA) in the view of the throuhtput and mean delay time. Also it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access(CSMA).etc when the fading effect or impulsive noise exists in the mobile channel. Especially in the case of the distributed mobile network. It has been shown that the receiver-transmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.359-366
• /
• 2018

Social infrastructure facilities that have been under construction since the country's high-growth period are undergoing rapid aging, and safety assessments of large structures such as bridge tunnels, which can be directly linked to large-scale casualties in the event of an accident, are necessary. Wireless smart sensor networks that improve SHM(Structural Health Monitoring) based on existing wire sensors are difficult to construct economical and efficient system due to short signal reach. The LPWAN, Low Power Wide Area Network, is becoming popular with the Internet of Things and it is possible to construct economical and efficient SHM by applying it to structural health monitoring. This study examines the applicability of LoRa LPWAN to structural health monitoring and proposes a channel usage pre-planning based LoRa network operation method that can efficiently utilize bandwidth while resolving conflicts between channels caused by using license - exempt communication band.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.762-768
• /
• 2016

In this paper, a method for generating ranging signal to reduce the effects of interference and overcome intentional jamming is proposed in slow frequency hopping(SFH) communication system. A terminal uses ranging signal for initial Up-link synchronization in the frequency hopping communication systems using multi-terminal. However, ranging signal generated by unsynchronized terminal acts as an interference signal to another terminal. Therefore, we propose the design of the ranging signal with PN sequence in order to minimize the affection to the other terminal and simulated its performance. From the simulated result, we confirm synchronization performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.906-911
• /
• 2001

In this paper, LPI(low probability of intercept) and AJ(anti jamming) performance of the chirped BPSK system are analyzed. In the chirp method the cyclostationary of the signal is eliminated, since the instantaneous frequency is varied randomly within the whole spread bandwidth. Therefore, chirp method is considered for good LPI system against DAM(delay-and-multiplier) or SC (squaring circuit) interceptor which detects the chip rate or carrier frequency. Longer chirp duration makes the LPI performance better. From the simulation results, the chirp method has better AJ performance than DS(direct sequence) system in the PBNJ(partial band noise jammer) channel. At the same JSR(jammer to signal power ratio) level, chirped BPSK system has more robust AJ performance against MTJ(multi-tone jammer) than PBNJ.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.13-20
• /
• 2001

In this paper, we propose a new digital audio watermarking scheme In the cepstrum domain. We insert a digital watermark signal Into the cepstral components of the audio signal using a technique analogous to spread spectrum Communications, hiding a narrow band signal in a wade band channel. In our proposed method, we use pseudo-random sequences to watermark the audio signal. The watermark Is then weighted in the cepstrum domain according to the distribution of cepstral coefficients and the frequency masking characteristics of the human auditory system. The proposed watermark embedding scheme minimizes audibility of the watermark signal. and the embedded watermark is robust to mu1tip1e watermarks, MPEG audio ceding and additive noose.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.6-12
• /
• 2004

Identification rate and time are very important in the identification of RFID tag, and the tag requires simple structure to use economically large quantity of tags. These factors make the MAC protocols of wired or wireless network environment result in different requirements. In the paper, we propose a method to apply spread spectrum scheme using orthogonal channel via Walsh function as the anti-collision communication system for the purpose of non-collision identification of multiple tags, and consider its property. The proposed system use two step identification. in the first step, collision is resolved via constructing to respond after specific delay time based on unique n, and conventional polling scheme follows in the second step.