• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.439-444
• /
• 2020

In this paper, the analysis of the FSCS (frequency-selected coupling structure) as the coupling coefficient and multi-stage FSCS for enhanced bandstop bandwidth is suggested. The FSCS is composed by the connected coupled-line and open-stub. Basically, the resonance frequency of the FSCS is given by the electrical length of the stub, and the bandwidth is controlled by the coupling coefficient. Multi-stage FSCS is made by addition of another FSCS with the half electrical length. Manufactured bandstop filter using 3 stage FSCS is measured with the stopband of 177.3% and the maximum return loss of 1dB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.1-5
• /
• 2017

In this paper, we propose a wideband band-stop filter (BSF) in order to extend the stopband of the band-stop filter using a symmetric dual spurline and the coupled open stub. First, we know that the symmetric dual spurline structure is advantageous in widening the stopband, as compared to the asymmetric dual spurline structure. So we designed a band-stop filter that combines the electrically coupled open stub (ECOS) band-stop filter with a symmetric dual spurline. We can greatly extend the stopband, when it is combined with the dual spurline and electrically coupled open stub on a microstrip transmission line, without any size increment. The stopband of the proposed band-stop filter is extended by approximately 244% (rejection depth: -20 dB) compared with a band-stop filter without a dual spurline.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6022-6026
• /
• 2012

This article presents a band-stop filter (BSF) by using a periodic structure property of frequency selective surfaces (FSSs) embedded in a microstrip transmission line. The proposed BSF is designed with FSS unit cells modifying the cross-loop slots. The BSF is interpreted with an equivalent circuit model and a dispersion diagram. The center frequency (fo) of the BSF is 6.6GHz. Proposed filter increases the number of unit cell. As a result, 3dB bandwidth is wider and insertion loss is reduced. Also, Facbricated BSF exhibits uniplanar geometry, simple fabrication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.777-784
• /
• 2004

In this paper, a new filter structure to improve frequency response characteristics in decimation filter using CIC(Cascaded Integrator-Comb) filters and half band filters is proposed. Conventional filters improve only passband characteristics, but we propose a new filter which can improve stop band and pass band characteristics simultaneously. Since proposed filter needs only two multiplication, additional implementation cost is not much. And overall linear phase characteristics are maintained since the proposed filter is also linear phase. Finally, filter coefficients quantization effects ate discussed after Verilog-HDL coding.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1603_1604
• /
• 2009

본 논문에서는 SIR(Stepped Impedance Resonator)를 이용하여 RFID 주파수 대역의 이중대역 필터를 설계 연구하였다. 반파장 SIR을 parallel-coupled 형태로 설계하고 넓은 주파수 간격의 이중대역필터를 구현하기 위해서 2st 공진 주파수를 2.45GHz 대역에 맞추고 1st 공진 주파수를 억제하기 위해서 대역저지 필터를 결합하였다. 입출력에 대역 저지 필터를 구성하고 반파장 parallel-coulpled SIR은 미앤더 구조로 설계하여 크기를 줄였다. 본 논문에서 설계된 필터는 두 대역에서 -3.5~3.9dB의 삽입 손실을 가지며 433MHz에서 8MHz, 2.45GHz에서 21MHz의 대역폭을 나타낸다. 관심 주파수 이외의 대역에서는 -50dB 이상의 저지 특성을 가진다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.41-47
• /
• 1998

이중 통신(Duplexer) 필터를 설계 및 개발하기 위한 최적조건을 구하기 위해 36° LiTaO3 기판 표면에 빗살무늬 변환기를 사용한 모의 실험을 수행하였으며, 전극 재료로는 Cu-Al(W3%)합금을 이용하였다. 제작한 듀플렉스 필터의 사다리(Lader)형 구조로서 직렬 공진기와 병렬 공진기의 결합으로 필터를 구성하였다. 적절한 통과대역과 저지대역을 형성 하기 위하여 직렬 공진기와 병렬 공지기의 주파수 차이를 30MHz로 했으며, 낮은 저지대역 을 형성하기 위하여 두 공진기의 전기용량의 비는 1로 하였고, 전극의 두께는 2,500Å으로 하였을 때 설계 조건과 일치하는 주파수 응답을 얻었다. 제작한 듀플렉서 필터의 주파수 특 성은 중심 주파수는 836.5MHz와 881.5MHz, 통과대역 폭은 25MHz, 삽입손실은 2.5dB 이하 및 저지대역은 -35dB이하로 나타났다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1414-1415
• /
• 2008

본 논문에서는 고출력 극초단파(High Power Microwave)가 쏘아지는 대상이 방어장비를 갖추고 있을 때 외부대상이 어떤 영향을 받는지를 규명하는데 목적이 있다. 입력펄스를 변조(modulation)시켜 저지대역(Stop Band) 주파수 대역에 맞추고, 펄스(Pulse)를 저대역 통과 필터의 저지대역에 통과시킨다. 이때 출력펄스의 응답(response)을 시간영역(Time-domain)에서 분석하여 정상상태(steady state)보다는 과도응답(Transient Response)을 확인하는 것을 제안한다. 이 방법은 저지대역의 파형이 필터를 통과해도 과도응답 때문에 필터가 제 역할을 하지 못한다는 이론을 규명한다. 이 이론은 고출력 극초단파가 외부대상에 미치는 영향에 있어서 전자파를 방어하려고 하여도 과도응답 상태 응답 때문에 타격을 받을 수 있다는 것을 규명한다.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.566-571
• /
• 2009

In this paper, microstrip bandpass filter combined DCRLH metameterial-cells with a hairpin resonator is designed and fabricated to be transferred only fundamental passband signal, and removed a spurious resonant mode occurring when filter design using a microstrip transmission line is done. The bandpass filter is composed of CCRLH hairpin resonator and DCRLH interdigit metameterial-cells. The hairpin resonator with CCRLH property is implemented between two DCRLH interdigit metameterial-cells with DCRLH property, which is parallel to input port and output port. The interdigit metameterial-cells suppress spurious harmonics occurring on the higher order frequency and improve a filter performance. Insertion loss of the fabricated microstrip bandpass filter on the passband from 1.91GHz to 2.41GHz is 0.2dB, and attenuation on the stopband from 3GHz to 7.7GHz is bellower than -30dB. Therefore, this filter has a good performance for both mobile communications of WCDMA and wireless internet of WiBro.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.5
• /
• pp.250-257
• /
• 1985

High order filters are usually realized by cascading second order stages. In this paper, a simple method of pole-zero pairing in the high order band-pass and band-reject filter realization of the elliptic functions is proposed for the enhancement of overall dynamic range. Futrhermore, the optimum sequence of the various biquads of high-pass notch, low-pass notch and symmetrical notch etc., is developed for the elliptic band-pass and band-reject filters.