• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.118-125
• /
• 2007

Harmonic band of bandpass filter(BPF) is suppressed using coupled mushroom structure. Between double positive (DPS) transmission line such as microstrip and double negative(DNG) transmission line such as one dimensional mushroom structure, strong coupling broadly arises in the cross range of dispersion curves of isolated microstrip and mushroom structure because of complex propagation constant in the cross range. Strong coupling inhibits wave propagation, so that this kind of structure can be utilized as bandstop filter(BSF). This BSF utilizes coupled transmission line instead of coupled resonator, resulting in broad bandwidth(>30 %), shan-rejection, and high rejection level. The strong coupling between DPS and DNG transmissionline makes it possible shorten coupling length, resulting in compact size. In this paper, parallel coupled BSF having center frequency of 4 GHz and 3 dB fractional bandwidth of 40 % is designed and utilized to suppressed spurious mode of two bandpass filters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.124-128
• /
• 2009

This raper proposes a dual-bandstop filter, which is based on a metamaterial transmission line using the composite right/left-handed (CRLH) and dual composite right/left-handed (D-CRLH) structures. The metamaterial structure is used for miniaturization and dual-bandstop operation at the TDMB frequency range (195 MHz) and DVB-T/H frequency range (670 MHz). The size of the proposed filter is $30{\times}15\;mm$, and the -10 dB bandstop fractional bandwidth is approximately 73 % and 50 % at each frequency, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1199-1205
• /
• 2006

This paper proposes a wideband monopole antenna with improved band rejection characteristics by inserting two band notch slots with half wavelength in radiator. The designed antenna is composed of bow-tie patch fed electromagnetically with parasitic ground patch of a semicircular shape. We obtained band rejection filter-like characteristics by controlling coupling amounts between two horizontal resonance slots. Using this technique, we achieved the broad rejection bandwidth and improved skirt characteristics compared with only one notch slot. The measured bandwidth is from 2.7 GHz to 6.9 GHz for VSWR below 2.0 except the limited band of $4.96{\sim}5.51GHz$. This antenna shows a similar radiation pattern of the ideal monopole and the radiation gain reduction is more than $5{\sim}10dB$ on the x-z plane at rejection frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.505-513
• /
• 1996

In this paper the dual-mode bandpass filters with a Chebyshev response are designed and manufactured at Ku-band as well as K-band. Manufactured filters are resonated by two independent orthogonal $TE_{113}$ circular-cavity modes and characterized by 4-pole Chebyshev function. One is operating at a center frequency of 12.5GHz with a bandwidth of 100MHz and the other, a center frequency of 19.25GHz with 120MHz, respectively. The measureed experimental results of a 12.5GHZ dual-mode filter ahve a 1.2dB intertion loss in the passband and 65dB out-of-rejection, and a 19.25GHz filter has a 1.55dB insertion loss and 70dB out-of-rejection. These experimantal results shoults show good agreements with the design specifications.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.23-30
• /
• 1999

In this study, we propose a new optimization algorithm for a withdrawal weighted SAW transversal filter to satisfy given, specifications such as bandwidth, ripple, insertion loss, and sidelobe rejection level. An analysis tool for the withdrawal weighted filter has been produced by means of the delta function model, and has been applied to the design of a filter consisting of an uniform input IDT and a withdrawal weighted output IDT. This optimization algorithm consists of three routines, which eventually determines eight design parameters to satisfy the performance specifications. At the first step, the number of input and output IDT fingers and their geometrical size are determined by the insertion loss specification. At the next step, the bandwidth is controlled by the change of the IDT finger position. Finally, the sidelobe rejection level is modified through the add/skip technique of IDT fingers. The algorithm in this paper is distinct from conventional techniques in that it can simultaneously consider all the specifications such as bandwidth, ripple, sidelobe rejection level and insertion loss, and optimize the geometry of the withdrawal weighted SAW filter.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1666-1667
• /
• 2011

본 논문에서는 CSRR을 이용하여 0.5~1.5GHz 대역의 광대역 필터를 최적 설계 연구 하였다. Metamaterial의 일종인 CSRR은 LC 공진기 역할을 하며 전송선로와 결합하여 필터 특성을 나타낸다. 또한 높은 Q-factor의 특성을 갖기 때문에 협대역 대역통과 필터 특성을 갖는다. 이에 본 논문에서는 CSRR을 이용하여 광대역 대역통과 특성을 갑기 위해서 전송선로의 형태를 변형하고 진화알고리즘중 하나인 진화 전략기법을 이용하여 단일 셀의 최적 설계를 수행하였다. 이후 단위 셀을 다단으로 연결하여 최종 광대역 필터를 설계하였다. 본 논문에서 설계된 광대역 필터는 0.5~1.5GHz의 대역폭을 갖으며 00~00dB의 삽입손실을 갖는다. 그리고 저지대역에서 00~00dB의 저지 특성을 갖는다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.283-289
• /
• 2003

In this paper, we proposed novel multilayer photonic bandgap(PBG) structure using DSL(Descended Signal Line). From measurement result, the proposed PBG structure using DSL is reduced 72 % at size and increased 13 % at bandwidth compared to typical multilayer DGS(Defected Ground Structure). It is also reduced 42 % at size and increased 23 % at bandwidth compared to PBG structure using EGP(Elevated Ground Plane). In case of measurement for manufactured six PBG patterns, all patterns have the same cutoff frequency and bandstop characteristics. So it can be used for bandstop filter having very precise tolerance of below 300 MHz at 20 ㎓ if it is applied to real product and this filter will be useful for small microwave integrated circuit and module development.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.43-46
• /
• 2018

This paper has designed a wideband bandpass filter (WBSF : Wide Band Stop Filter) using a stepped impedance resonator (SIR : Stepped Impedance Resonator) with improved performance and improved hairpin coupling structure. The SIR WBSF is small in size and has the advantage of having excellent bandstop characteristics. The designed BSF has a structure in which a quadrangular shaped hairpin of a / 4 length is arranged symmetrically on the upper and lower sides of the input and output transmission lines. The input and output terminals were terminated at 50 ohms for system applications. The center frequency of the SIR WBSF is 6.3 GHz, which is the second harmonic of 3.15 GHz. The designed filter has a 3dB bandwidth of 2.9 GHz and a transmission coefficient ($S_{21}$) of 33.2 dB. The reflection coefficient ($S_{11}$) at the center frequency is 0.106 dB. The application field is used for fixed microwave relay stations, fixed satellite and earth stations, and fixed satellite communications. The overall size is $20mm{\times}10mm$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.516-521
• /
• 2011

In this paper, an inverted-triangle patch UWB antenna with an uneven ground planes and an inverted T-slot for 5 GHz WLAN band rejection is presented. The operating bandwidth of the proposed antenna fed with the CPW line is expanded from 3.1 GHz to 10.6 GHz for about -10 dB return loss using three angular parameters correlated to the main patch and the ground plane. The fabricated antenna on Taconic RF-60A substrate with 6.16 relative dielectric constant and 0.64 mm thickness has a main antenna patch size of 36 mm${\times}$19.5 mm. The measured results show return losses of about -10 dB and nearly omni-directional radiation patterns. The proposed UWB antenna has advantages of easily adjustable impedance characteristics by the three angular parameters and easily accomplishable band rejection characteristics by the inverted T-slot.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.1-8
• /
• 2011

In this paper, a microstrip bandpass filter(BPF) with 3 dB bandwidth of more than 50 % at center frequency of 30 GHz was implemented. The implemented BPF is to be used as ASK(Amplitude Shift Keying) transmission and reception filters in IF band for THz transmitter and receiver capable of 10 Gb/s wireless data transmission. The microstrip BPF with ultra-wideband characteristics was implemented using a stepped-impedance lowpass filter(LPF) and a composite quarter-wave short stubs where the LPF is functioning as attenuating the upper stopband and quarter-wave short stubs is functioning as attenuating the lower stopband. The measured results are as follows; the insertion loss is 0.65 dB at 30 GHz, the stopband characteristics are -10 dB and -16 dB at 10 GHz and 50 GHz, respectively, and the passband flatness is ${\pm}0.5$ dB at 20~40 GHz.