• Journal of Power System Engineering
• /
• v.12 no.1
• /
• pp.58-65
• /
• 2008

A method to test thin-walled tubes by guided ultrasonic wave is reported. The principle is that applicate two types of axially symmetric ultrasonic tube modes and "longitudinal" modes with particle displacement, which is coupled in axial and radial directions for transverse failures and torsional modes, oscillating in the circumferential direction only, for longitudinal failures. Both types of modes propagate along the tube in the axial direction. Therefore, a pulse-echo technique is possible. The pulses are excited and received at one end of the tube without contact electro-dynamic transducers. As soon as the tubes is put into a transducer coil at one end, the test of the whole tube can be accomplished in a few milliseconds. It is not necessary to rotate and transport the tubes during the test.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.33.1-33.1
• /
• 2009

GMT(Giant Magellan Telescope)는 그레고리안(Gregorian) 방식 망원경이다. 일반적으로 그레고리안 방식은 포물면인 주경과 타원면인 부경으로 구성되어 있으나, GMT의 주경은 비구면계수가 -0.99829인 타원면이다. 부경은 지름 1.063m 7장의 반사경이 3.2m의 부경을 이루며 곡률반경은 4.2058m, 비구면계수는 -0.71087이다. 주경과 부경은 모두 1장의 중앙 반사경과 6장의 비축 반사경으로 이루어져 있다. 따라서 GMT 광학계에서 대구경 비축 비구면 반사경의 가공 및 테스트는 매우 중요하다. 이 발표에서는 GMT 부경을 테스트하기 위하여, 타원면의 기본적인 광학적 특성을 이용한 테스트 방법과 이 방법의 단점을 보완하기 위해 Reference 반사경을 이용하는 방법, 그리고 Null compensator를 이용한 방법 등을 제시한다. Null compensator를 이용한 방법에는 일반적으로 Autostigmatic 방식과 Autocollimation 방식이 있으며 이 발표에서는 이 두 방식을 상호 비교한 연구 결과에 대하여 논의한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1365-1369
• /
• 2008

A large diameter sampler (KICT-type large diameter sampler) was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The KICT-type large diameter sampler was manufactured with the principle of triple core barrel sampling. In this study, the applicability to offshore ground sampling of the KICT-type large diameter sampler was confirmed at Inchoen Port construction site. And, in order to compare the quality of samples taken by the sampler with that of the traditional piston sampler, a series of laboratory tests were performed. From the test results, the samples taken by the KICT-type large diameter sampler showed higher quality than the traditional thin-walled tube samples.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.845-862
• /
• 2009

Recently, Tunnel in soil has been designed frequently because Mountain Tunnel has been increased rapidly due to straight of horizontal curve and residents' complaints, tunnel portal has been planned at closed to surface for minimization of environmental damage. To excavate tunnel in soil, where displacement and crushing occur in tunnel face and crown because of unstable ground condition, appropriate reinforcement method needed. On this paper, through design and construction of the soil tunnel, consider application of reinforcement method, economical efficiency and stability.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.110-111
• /
• 2018

Because of the congestion problems, the high-strength reinforcements are expected to be used in nuclear power plant structures in the near future. According to ACI 349-13, it is permitted to use the high-strength(550MPa) straight bars in design of development length, but there is no special equation for high-strength bars. In order to reflect the anchorage capacity and behavior properties of high-strength straight bars with large-diameter(43 & 57mm), it is necessary to find the modified factor or develop the new development length equation for large-size and high-strength bars.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.235-240
• /
• 2008

The large size electromagnetic flowmeter was tested to investigate the variation of its error characteristics in the range of low velocity under 0.6 m/s using flowmeter calibration system. For the two case of valve opening rate 100 % and 50 %, these tests were undertaken three times each for twelve velocity condition from $0.05\;^m/s\;to\;0.6\;^m/s$ with increment of $0.05\;^m/s$. It is shown that error characteristic of electromagnetic flowmeter was stabilized within ${\pm}0.4%$ of rate both higher than $0.25^m/s$ of velocity condition and 50 % of valve opening position. But, measurement deviation of flowmeter for ${\Phi}400mm\;and\;{\Phi}600mm$ was out of expected deviation range. It is necessary to correction with calibration. In conclusion, error characteristic of electromagnetic flowmeter wasn't changed proportion to its size.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.424-442
• /
• 2005

In this paper a design of a large shield Tunnel through weathered soil and weathered rock in 703 section of seoul subway line No.7 extension project is presented. The geological investigation results show that the projecet region consists mostly of weathered soil with some local weathered rock in the tunnel excavation level. A EPB shield TBM is selected as a optimal excavation machine for the large shield Tunnel considering the geological and site conditions. Also, the shield machine head and cutter for the large shield tunnel type are designed considering site geological conditions and average advance rate in similar projects.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.191.1-191.1
• /
• 2012

저궤도 위성은 대구경 광학 탑재체를 장착한 지구관측 위성으로 자세제어 센서, 탑재 데이터 전송 안테나 및 탑재체가 정밀하게 장착되어야 한다. 이를 위해 정밀한 장착을 설계과정에서 검토 및 해석을 하기 위한 요구조건을 설정하고, 요구조건을 분석하는 과정을 거치게 된다. 분석이 수행되면 이 결과를 근거로 능동적인 정열오차 교정이 필요한지, 또는 단순히 위치 정열에 대한 측정만이 필요한지를 결정한다. 그리고 측정장비의 시야각 검증 및 위치정열 측정 방안을 검토 한 후 장비들의 위치 정렬 측정 시험을 통해 정확한 위치를 확인하고, 요구조건과 비교하여 만족하는지 확인하게 된다. 다시 말해서, 위성체에 장치된 각종 장비들이 설계된 위치에 정확히 위치하고 있는지 확인하는 과정이다. 본 논문에서는 저궤도위성의 정렬 요구조건 분석 및 측정 시험을 수행한 내용을 기술하고자 한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.230.1-230.1
• /
• 2012

본 논문에서는 대구경 광학탑재체의 조립, 정렬 및 시험에 사용되는 고정밀, 고안정 짐발장치의 개발에 대해서 소개하고자 한다. 광학탑재체의 광학시험을 위해 사용되는 짐발장치는 광축높이를 유지하기 위해서 높이조절이 가능해야하고, 조립과정과 광학시험과정 그리고 시험 후 광학탑재체를 짐발 장치로부터 분리하기 위해 수평상태와 수직상태로의 회전이 가능해야 한다. 광학측정 시험과정 중에 결상위치의 미세한 조절을 위해 광학탑재체를 수평상태에서 상하좌우 정밀한 회전이 가능해야한다. 우주궤도환경 하에서 성능측정을 위해 열진공체임버 안에서의 광학시험이 필요하므로 짐발장치를 구성하는 재질은 모두 진공사용이 적합한 것이어야 한다. 광학측정 중에 측정설비주변에서부터 인가된 외란은 광학시험과 같은 민감한 시험에서는 철저하게 제거되어야 하는데, 이와 관련하여 짐발장치의 광학측정시험형상에서의 고유진동수와 같은 동적 특성도 설계과정에 반영하여 안정적인 측정 장치가 되도록 고려되어야 한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.6
• /
• pp.368-371
• /
• 2004

The quench current characteristics of the superconducting solenoids with large diameter were experimentally investigated. Three solenoids with inside diameter of 450mm were fabricated with different tensions and different types of epoxy applications. The quench current of each solenoid was measured according to the various ramping rates of current. The highest quench current was obtained in the solenoid impregnated with epoxy after winding with tension of 20 percents of the yield strength of the superconducting wire. It was found that the quench currents were almost independent of the ramp rate of current. From the results, although the training effect in the solenoid appeared with epoxy impregnation, the quench current of solenoid impregnated with epoxy was higher than that without epoxy impregnated The test results are presented and discussed.