• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2008

Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter. By using high frequency inverter high frequency alternative current (HFAC) in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. In this paper are discussed action analysis and characteristics analysis of 1.5[kW]-Class half-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how two step heating superheated steam generator is developed and application of system are also discussed.

• Analytical Science and Technology
• /
• v.36 no.3
• /
• pp.128-134
• /
• 2023

Centella asiatica (C. asiatica) extracts, including asiaticoside and madecassoside, are used in ointments to treat the wound and atopic dermatitis due to their antibacterial and skin-regenerating effects in Asia. Therefore, research on the cultivation and extraction efficiency of C. asiatica is being actively conducted to increase commercialization efficiency. In this study, various deep eutectic solvents (DESs) were prepared and used as the extraction solvents according to the mole ratio between the hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). And then, the extraction yields in distilled water (DW) and methanol (MeOH), commonly used extraction solvents for C. asiatica, were compared and analyzed by HPLC in the optimized operating condition. As a result, a mixture of DW and DES at a ratio of 3:7 showed about 1.4 times higher extraction efficiency than MeOH only. Conversely, the extraction efficiency in a mixture of MeOH and DES at a ratio of 3:7 was about 6 % lower than that in MeOH only.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.204-214
• /
• 2005

This study compared the microtensile bond strength (${\mu}$TBS) and microscopic change of two 2-step and two 1-step self-etching adhesives to dentin according to storage times in distilled water. Occlusal dentin was exposed in 48 human molars. They were divided to four groups by different adhesives: SE Bond group (Clearfil SE Bond), AdheSE group (AdheSE). Adper group (Adper Prompt L-Pop), and Xeno group (Xeno III) . Each group was stored in 37$^{\circ}C$ distilled water for 1, 15, and 30 days. Resin-bonded specimens were sectioned into beams and subjected to ${\mu}$TBS testing with a crosshead speed of 1 mm/minute. For SEM observation, one specimen was selected and sectioned in each group after each stroage time. Resin-dentin interface was observed under FE-SEM. In all storage times, mean ${\mu}$TBS of SE group was significantly higher than those of other groups (p < 0.05). There was no significant difference between mean ${\mu}$TBS of SE group and AdheSE group among all storage times, but significant difference between 1- and 30-day storage in mean y${\mu}$TBS of Adper group and Xeno group (p > 0.05). For 1-and 15-day storage, all groups showed the close adaptation between resin-dentin interfaces. For 30-day storage, resin-dentin interfaces showed wide gap in Adper group and separate pattern in Xeno III group.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.207-217
• /
• 1995

Extracting efficiencies of seven extracting solutions currently employed in extracting heavy metals from soils were compared and the functional relationships among them were calculated by regression analysis for Cd, Zn, Cu, and Pb. Extracting solutions employed were 0.1M HCl, 0.1M $HNO_3$, 0.05M EDTA, 0.001M DTPA(pH 7.3), 1M $NH_4OAc$ (pH 7.0), 0.1M $NH_4Ox$, and 4M $HNO_3$ respectively. Soil samples were collected from rice paddy fields near old zinc mining sites and from rice paddy fields near agro-industry complexes. Soils sampled from old zinc mining sites were also extracted using a sequential extraction method. Extraction by 4M $HNO_3$ and sequential extraction were performed on the samples collected both in 1979 and in 1991 to investigate the change in content and in chemical form of heavy metals. Functional relationships among the extracting solutions were highly correlated for Cd and Zn, whereas those for Cu and Pb were not. The predominant chemical form of Cd. Zn, Cu, and Pb in soils from old zinc mining sites was found to be of sulfide/residue form. The exchangeable form of Cd, the organically bound form of Cu, and the carbonate form of Pb were relatively high, while the sulfide/residue form of Zn was very high(> 79%). Although transformation among the extracted forms was not clear during those 12 years, a decrease in total content of Cd, Zn, Cu, and Pb was clearly observed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.176.1-176.1
• /
• 2011

바이오디젤 대체 원료로서 폐돈지, 폐우지를 이용한 오일 추출 및 바이오디젤 생산 반응을 진행하고 이때 사용되는 과잉 메탄올의 회수 및 재사용에 관한 연구를 수행하였다. 추출된 오일의 상태에 따라 전처리를 위한 에스테르화 반응여부를 판단하게 되지만 에스테르화 반응과 전이에스테르화 반응 모두에서 상당량의 과잉 메탄올을 투입하게 된다. 에스테르화 반응에서는 이론량보다 20~50배 가량을 투입하고 전이에스테르화 반응에서는 오일:메탄올 이론 몰비인 3:1 보다 2~4배 가량을 이용하게 된다. 에스테르화 반응에 사용되는 촉매는 균질계 액체 산 촉매와 불균질계 고체 산 촉매가 이용될 수 있으며 본 연구에서는 황산을 이용한 에스테르화 반응을 실시하였으며 전이에스테르화 반응에서는 KOH를 촉매로 이용하였다. 각각의 공정에 사용된 과잉 메탄올의 재이용 방안을 조사하였으며 메탄올을 단증류를 통해 회수하는 방법과 회수된 메탄올을 이용한 에스테르화 반응 및 전이에스테르화 반응을 실시해 반응성을 조사하였다. 이를 통해 미반응 과잉메탄올의 회수 정제시 메탄올의 최대 수분함량(%) 허용치를 결정할 수 있었다. 회수된 메탄올을 재이용함에 따라 바이오디젤 생산비 중의 원료(메탄올) 및 설비비 절감이 가능할 것으로 판단된다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.3-10
• /
• 1997

제염농축공정은 증류, 증발법을 일반적으로 사용하나, 에너지 절약차원에서 전기투석 (Electro dialysis)장치를 증발기 선단에 도입한 복합공정을 국내에서도 사용하고 있는 실정이다. 그러나, 전기투석장치는 전기적인 소모와 막의 재생, 교체처리비가 문제점이 되므로 역삼투 장치를 제염농축 공정 최선단에 도입한 복합공정을 이용할 경우 전기 투석 및 증발 복합공정에 비해 40%의 에너지 절감 효과를 기대할 수 있다. 이와 같은 장점에도 불구하고 역삼투 공정은 공급용액의 삼투압보다 큰 적용압력을 막표면에 가하여 물질분리를 수행하므로 농축공정에서 유발되는 배제액 농도의 상승은 삼투압의 증가를 일으켜 실적적용압력의 효과를 떨어뜨리게 되며 결과적으로 농축효과를 감소시키게 된다. 본 연구에서는 효과적인 염농축 공정을 위하여 막모듈 투과부에 고농도 삼투압 감소액(osmotic sink solution)을 향류식(막투과흐름을 맞받아치며 흐르는 방식)으로 유입시키는 향류식 역삼투 (counter-current reverse osmosis, CCRO) 나권형 모듈을 고안 제작하였으며, 제작된 모듈을 기존 역삼투 공정과 향류식 염삼투 공정에 적용하여 염농축도의 성능을 상호 비교하고 염농축에 관계되는 공급농도, 공급유량, 투과유량, 배제유량, 향류 유입유량, 압력구배, 삼투압차 및 농축단수 등의 인자들을 이용하여 두 공정에 대한 염농축 분리조작의 제반조건과 제작된 모듈 내의 농축관련 특성을 실험 및 수치적으로 비교, 고찰하였다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.39-48
• /
• 2021

In this study, characteristics of solid-state fermentation distilled spirits with nuruk (fermentation starter) and sorghum were investigated. The starch digestion activity was highest in black koji (A. usamii) at 359.15 U/g dry base, white koji (A. luchuensis) at 306.98 and yellow koji (A. oryzae) at 15.31 was followed. The pH of the solid-state fermented mash in yellow, white and black koji showed 5.09, 4.46 and 4.50 respectively with significant differences (p<0.001). The total acid content of white and black koji was 0.73% as citric acid. The alcohol content of mash prepared with yellow, white and black koji was 4.34, 4.24, 3.89% respectively. The contents of reducing sugar showed 3.28, 3.23 and 2.64%. Total sugar were 14.88, 17.84 and 17.60% respectively. The alcohol content of each distillate ranged from 44.3 to 39.9%, and the furfural content in yellow koji was 1.25 times lower than the others.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.452-459
• /
• 2006

Competition will usually develop between the opposing walls as the restorative resin shrinks during polymerization. Magnitude of this phenomenon may be depended upon cavity configuration and volume. The purpose of this sturdy was to evaluate the effect of cavity configuration and volume on microleakage of composite resin restoration that has margins on the enamel site only. The labial enamel of forty bovine teeth was ground using a model trimmer to expose a flat enamel surface. Four groups with cylindrical cavities were defined, according to volume and configuration factor(Depth x Diameter / C-factor) - Group I : 1.5 mm ${\times}$ 2.0 mm / 4.0, Group II : 1.5 mm ${\times}$ 6.0 mm / 2.0, Group III : 2.Omm ${\times}$ 1.72 mm / 5.62, Group IV : 2.0 mm ${\times}$ 5.23 mm / 2.54. After treating with fifth-generation one-bottle adhesive - BC Plus$^{TM}$ (Vericom, AnYang, Korea), cavities were bulk flted with microhybrid composite resin - Denfill$^{TM}$ (Vericom). Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Specimens were thermocycled 500 times between 5$^{\circ}$C and 55$^{\circ}$C for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}$A) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. The results were as follows: 1. Small cavity volume showed lower microleakage score than large one, however, there was no statistically significant difference. 2. There was no relationship between cavity configuration and microleakage. Factors of cavity configuration and volume did not affect on microleakage of resin restorations with enamel margins only.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.33-41
• /
• 2016

A scale up tests (380 kg/day) using a continuous solvent extraction and electro-winning system was carried out to separate and recover cobalt from a solution containing 1.91 g/L Co and 14.65 g/L Ni. The solution was obtained during a process including solvent extraction and precipitation stages for removal of Cu and Fe from a synthetic sulfuric acid solution of manganese nodule matte. The optimal condition for solvent extraction was : solvent concentration of 0.22M Na-Cyanex 272 (45% saponified with NaOH) and O:A phase ratios of 1:1.5, 10:1 and 1.5:1 used in extraction, scrubbing and stripping stages, respectively. The extraction and stripping efficiencies were found to be 99.8% and 99.88%, respectively. The stripped solution contained 40.27 g/L Co with 4 ppm Ni. Cobalt metal of 99.963% purity was yielded with current efficiency of 67% and current density of $0.563A/dm^2$ during the electro-winning process.

• Journal of Life Science
• /
• v.26 no.1
• /
• pp.123-128
• /
• 2016

The object of this study was to obtain accurate information about the co-administration effects of cardiotonic pills on the pharmacokinetics of cilostazol were observed as a process of the comprehensive and integrative medicine. Cilostazol is a synthetic anti-platelet and vasodilator agent developed for the treatment of intermittent claudication resulting from peripheral arterial disease. By increasing intracellular cyclic adenosine monophosphate (cAMP), cilostazol induces the activation of protein kinase A, which activates endothelial nitric oxide synthase. In order to evaluate the effect of a single or repeated cardiotonic pill dose on the pharmacokinetics of cilostazol, a single dose of pure_distilled water or a colloidal suspension of distilled water and cardiotonic pills were administered to the control and test groups, respectively. After 30 min, both groups were administered cilostazol. Plasma was collected 30min before administration, and 0.25, 0.5, 0.45, 1, 2, 4, 6, 8, and 24h after the end of cilostazol treatment. We then evaluated the pharmacokinetic changes observed with cilostazol between the control and test groups. No statistically significant differences were observed. These findings demonstrated that a single dose of cardiotonic pills did not affect the pharmacokinetics of cilostazol. The results obtained in this study suggest that co-administration of cardiotonic pills and cilostazol may not affect the bioavailability of cilostazol as a potential drug interaction.