• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1539-1544
• /
• 1995

Copper blow test to measure the forging capability of 35 ton counterblow hammer and upset of plasticine on the model hammer to investigate the change of the blow efficiency during the forging process have been performed together with finite element analyses of these experiments. The blow efficiency of the hammer has been found to be dependent on the friction and on the contact area between the die and the workpiece. The effects of the volume and the aspect ratio of the billet have not been found. Inferring from the experimental results and Schey's empirical formula on the forging load, we expect that the efficiency also varies with the flow stress of the workpiece material and with the shape complexity of the forging product.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.84-90
• /
• 2010

The cold forging Process applies surface lubricant coating in order to smooth the friction during the cold forging process. Currently, most of the lubrication processes apply the zinc phosphate coating, which requires 11 steps and disposes sludge. But the water based lubrication process, which has been newly developed, takes 3 steps only and does not cause sludge. In this study, we present the optimal condition of water based lubrication for the cold forging of axle shaft by an experimental design method. Experimental results with minitab shall be able to predict the optimum water based lubricating conditions for the cold forging processes.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.30-38
• /
• 2002

AUSM계열 수치기법이 가지는 전동현상에 대해 수학적, 수치적 방법을 이용하여 이를 증명하였다. 이제까지 정성적으로 알려진 내용을 수학적 방법을 통해 정량화하여, 각 수치기법의 진동 크기에 대한 직접적인 비교를 수행하였다. 음속천이점 위치에 따른 각 수치기법의 특성을 파악할 수 있고 M-AUSMPW+수치기법은 전 마하수 영역에 걸쳐 단조성을 유지하면서 충격파를 포착하는 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.106-110
• /
• 2001

A effective and accurate method of hot-forging process is essential to the design of optimized dies as well as workpiece of intial shape. the former is achieved by a proper forging sequence with invokes serious problem like excessive load and die wear, die failure, underfilling and lap defects. the latter is achieved by a proper preform design of case I, case II, case III. metal forming processes of aluminum-alloy forged at an effective strain and temperature are analyzed by the finite element method. the non-isothermal analysis have been compared with optimized in terms of preform shape.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.111-115
• /
• 2001

The die design for hot forging was investigated for manufacturing precisely of scroll rotor made with Al-Si alloy. A scroll rotor is a non-symmetric 3-D shape part, having involute wraps. Disk-shaped billet of Al-Si alloy was extruded to wraps and boss simultaneously. Because the involute wraps is not axi-symmetric, the flow velocity and the stress of die is very much different at each portion. Moreover, the die in wraps portion is a cantilever beam and fractured. In this paper, the analysis of forming and die stress is investigated using the FEM tool, DEFORM-3D. The tensile strength of tool material is $250kg/mm^{2}$. From the analysis results, we can find the maximum principal stress of die is over the fracture strength and redesign the die. The prototype forged part is superior in net shaping and microstructure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.492-497
• /
• 2001

In the finite element analysis of metal forming processes using general Lagrangian formulation, element nodes in the mesh move and elements are distorted as the material is deformed. The excessive degeneracy of mesh interrupts finite element analysis and thus increases the error of plastic deformation energy. In this study, a remeshing scheme using so-called mesh compression method is proposed to effectively analyze the flash which is generated usually in hot forging processes. In order to verify the effectiveness of the method, several examples are tested in two-dimensional and three-dimensional problems.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2039-2052
• /
• 1994

In this study, an expert system for multi-stage cold forging process design of axisymmetric parts is developed. The available geometries are axisymmetric shape and cylinder with a hold in one end. The overall system is composed of knowledge-based system for process sequence design, output module interfaced with CAD system and material data-base. In the developed system, designed process can be modified in order to reduce the number of processes and make the distribution of forming load be almost equal at various deforming stages within the machine capacity. After process sequence design is completed, results can be stored as a text file or a commercial CAD system file. The capabilities of the developed system are illustrated through various examples of process design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.666-669
• /
• 2002

Process design of hot forging, asymmetric to symmetric rail, which is used for the turnout of railway express has been investigated. Owing to the big difference in shape between the initial billet and the final forged product, it is impossible to hot forge the rail in a single step. Therefore, multi step forging as well as die design for each step are necessary for the production. The deformation behavior during hot forging has been analyzed by the numerical simulation through commercial FEA software, DEFORM$^{TM}$-2D. Modification of the design and repeated simulation have been carried out on the basis of the simulation result. For comparison with the simulation results, flow analysis experiment using plasticize has been also carried out. The results of the flow analysis experiment showed good agreement with those of the simulation. Therefore, the developed process design could be applied to the actual production.

• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.136-144
• /
• 2006

Aluminum engine piston is manufactured by thixoforging according to forming variables. It is very important to find effects of forming variables on final products in thixoferging. In order to find the effects, however, many researchers and industrial technicians have depended upon too many types of experiments. In this study, the process parameters which have influences on thixofurging process of aluminum automotive engine piston are found by a statistical method and the correlation equations between the process parameters and quality of product are approximated through the surface response analysis. Forming variables such as initial solid fraction, die temperature, and compression holding time are considered fur manufacturing aluminum engine piston by thixofurging. Hardness and microstructure are inspected so that optimal forming condition is found by the statistical approach.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.30-36
• /
• 1997

In this study, the development of an aluminum forged piston was tried to substitute the cast piston, in which there were internal defects such as blow hole and shrink pipe. A gasoline engine piston was chosen as an example for developing the forged piston. Before aluminum forging, model, material (plasticine) test was carried out to investigate the forgeability and internal flow pattern of the forged piston at room temperature. From the result of model material test, an aluminum piston to be forged was redesigned. The aluminum pistion was forged in hot process. The quality of a forged piston was compared with that of a cast piston in the point of mechanical properties, internal defect and microstructure. It was proved that the forged piston was superior to the cast piston.