• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.407-408
• /
• 2003

다중입력조건에 따른 단일 출력퍼지시스템인 인구밀도와 도로조건에 따른 소개속도의 모델링시스템에서는 인구밀도와 도로조건의 퍼지멤버쉽에 대한 소개속도의 상승작용을 확인할 수 있었다. 그러나 도로조건을 평가하는 방법을 포장과 비포장으로만 구분함으로 인해 발생하는 퍼지추론과정에서 비탄력성은 향후 도로조건에 대한 세밀한 조사를 통하여 퍼지멤버쉽함수의 형태를 재고해야 할 것으로 판단된다. 실제 원자력시설에서 발생할 수 있는 사고의 경우 방사능에 노출될 수 있는 일반대중은 방사능에 대한 깊은 지식을 가지지 못하는 경우가 대부분이다. 따라서 차폐효과 혹은 소개속도를 정량적으로 파악하기 힘든 경우가 많다. 따라서, 이러한 퍼지시스템은 방사선 비상대응 시스템을 개발하는 의사결정자나 비상시 방사능에 노출되는 사람들의 대응 방식을 모델링하는데 유용할 것으로 판단된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.76-78
• /
• 2002

최근 멀티미디어 데이터 서버로 리눅스 시스템을 쓰는 경우가 많아 졌다. 이 경우, 멀티미디어 데이터에 관한 서비스를 효율적으로 제공할 수 있어야 한다. 이를 위하여, 본 논문에서는 기존의 리눅스 scheduling 방식이 갖는 단일레벨 run-queue 구조를 변형한 다중레벨 run-queue를 제안하였다. 기존의 단일레벨 run-queue에서는 queue 내에 프로세스의 수가 많아질수록 검색시간이 길어지는 단점이 있다. 본 논문에서는 기존의 run-queue를 여러 단계로 나누고, scheduling 과정에서 상위 queue부터 프로세스가 존재하는지를 조사하도록 스케줄러를 변형하였다. 따라서, 상위 queue에 프로세스가 있는 경우에는 하위의 queue는 더 이상 조사한 필요가 없게 되므로. 결과적으로 검색시간을 줄일 수 있게 된다. 한편, 다중 레벨의 run-queue를 사용할 경우, 이를 관리하기 위한 오버헤드가 별도로 발생한다. 본 논문에서는, 제안한 다중레벨의 run-queue 시스템의 성능을 최적화하기 위하여, queue의 적절한 개수 선정 및 각 프로세스를 어떤 queue에 넣을 것인지를 결정하는 것이 성능에 미치는 영향에 대하여 실험적으로 연구하여 새로운 스케줄러의 성능을 기존 스케줄러와 비로 분석하였다. 본 논문에서 제안한 멀티레벨 run-queue를 사용함으로써, 각 queue의 스케줄링 정책(policy)과 관련 파라메터 간을 독자적으로 변화시킬 수 있다. 따라서, 여러 가지 상황에 적합한 스케줄링을 각각의 경우에 맞게 최적화하는 것이 손쉬워 지므로 여러 분야에서 매우 유용하게 쓰일 것이다.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.324-330
• /
• 1995

Stimulated Brillouin scattering theory is described in an optical fiber. Frequency change with an optical heterodyne method is analyzed between reference signal of a source and stimulated Brillouin scattering signal in an optical fiber. By coupling a source with a few axial modes and an optical fiber ring resonator, Brillouin scattering is studied with a spectrum analyzer. Using reference beating signal of a source, we have reduced the Brillouin beating frequency from 13 GHz range to below GHz. Experimentally, we can see the Brillouin beating frequency from 13 GHz range to below GHz with a dispersion shifted fiber (1.32 GHz), Ti-doped fiber (900 MHz) and single mode optical fiber (870 MHz). MHz).

• Journal of radiological science and technology
• /
• v.43 no.4
• /
• pp.235-242
• /
• 2020

Scanogram is that combine several practical images into one image to observation. So it is an important consideration in many clinical situation such as iliac measurement, leg alignment measurement and Scoliosis. Currently, scanogram examinations are mainly conducted for children and elderly patients. In this study, in order to apply the longbone detector to children or elderly patients who are difficult to cooperate with, we compared the longbone detector from D equipment with the G equipment discovery 656 Puls equipment in reproducibility of images, distribution of irradiation dose, scattering dose, irradiation time and image acquisition time. D equipment took more than twice as much time as G equipment. The scattered dose generated about 50% more G equipment than D equipment. In the whole spine scanogram and the measurement length of the lower leg, D equipment was also measured longer than G equipment. However, both methods did not show much difference from the CT scanogram, so there was no problem in measurement. The height of the thyroid radiation dose of G equipment was produced more radiation than D equipment. However, the longbone detector deviated from the x-ray center line relative to the tube rotation method, and was measured lower by the directionality of the measuring instrument, so that the error could not be corrected. In the conclusion of study, using the longbone detector is excellent for applying to children or elderly patients to reduce scattering dose. However, using CR may be useful to normal patients. Because, the image quality may deteriorate due to an imbalance of dose difference in thickness depending on the body part. So, it is useful to using a compensation filter or tube rotation method when we take a whole spine scanogram.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.495-501
• /
• 2012

Spray characteristics of liquid jets in crossflow, which can be observed in the liquid jet injection system of a gas turbine or ramjet engine, were experimentally investigated. By measuring liquid jet penetration in the case of single orifice and double orifice injectors, the experimental formula for jet penetration was modified to consider penetration distances greater than that considered in a previous study. The changes in spray characteristics resulting from changes in the liquid jet and crossflow pressure, including SMD and jet disintegration, were carefully studied. Specifically, the jet penetration was measured for different injector shapes, and in the case of a double orifice injector, the penetration of the rear orifice jet was found to be greater by approximately 20% ($L_h$ = 4 mm) compared to that in the case of a single orifice injector because of the influence of the front orifice.

• Journal of the Economic Geographical Society of Korea
• /
• v.20 no.4
• /
• pp.522-535
• /
• 2017

It is necessary to develop a new location model to support the application of smart technology and confluence in the 4th industrial revolution era. In this study, we propose 'network-type industrial complex' as a method to link several industrial integrated spaces which are dispersed in an area. As a result of conducting a survey of companies in order to develop a new location model, about 89% of companies recognized the necessity of network-type industrial complex. As a condition for activation of the industrial complex, 'complementary function formation', and 'convenience of nodular transportation' were selected. It is expected that it will be possible to supply low-cost, high-efficiency industrial complexes through opening and linking with urban space and infrastructure sharing.

• 전기의세계
• /
• v.43 no.3
• /
• pp.18-28
• /
• 1994

현재까지 개발되고 있는 자기부상열차는 상전도 방식과 초전도 방식의 2종류로 대별 할 수 있다. 즉 상전도방식은 상전도 전자석에 의한 흡인력에 의해 지상에서 1cm정도를 부상하여 주행하는 시스템으로 영국의 버밍행공항의 People mover, 독일의 Transrapid, 일본의 HSST, 우리나라의 한양대, 자기 부상열차사업단, 대우중공업, 현대정공의 EXPO전시운행선등이 개발되어 있다. 초전도방식으로는 초전도전류에 의한 반발력에 의해 10cm이상 부상되어 운행되는 시스템으로 MLU 시스템이 있는데 지진이 심한 일본에서 개발되었다. 영국의 버밍햄공함의 People mover는 1984년부터 실용화되어 무인자동운전시스템으로 10년간을 아무 문제 없이 운행되고는 있지만 선로길이 620m 정도의 소규모 저속운송시스템에 지나지 않는다. 반면 독일의 Transrapid시스템은 31.5km의 트랙을 설치하여 시속 450km까지 운행을 계속하여 현재 15만km정도의 운행실적을 올리고 있다. 최근 독일내각은 함부르크-베를린 사이의 290km에 이르는 선로를 2005년까지 완공하기로 결정을 내리고 금년 상반기에 착공을 할 예정이다. 따라서 세계적으로 실용화단계에까지 도달한 대규모 고속시스템으로는 단연 Transrapid시스템을 꼽을 수 있다. 이에 Transrapid사와 미국, 일본등의 각 국에서 그간 세밀하게 조사하여 검토한 자료를 상세하게 소개하므로써 신교통시스템으로서의, 자기부상열차의 적합성과 개발의 타당성 및 당위성을 제시하여 이 분야에 관심있는 분들에게 참고는 물론 우리나라의 개발방향 설정에 유익한 자료가 되었으면 한다.

• Survey Research
• /
• v.9 no.3
• /
• pp.55-69
• /
• 2008

In most telephone surveys in Korea, telephone numbers are selected from the directories. Inevitably, such samples may lack representativeness due to poor coverage rate. To resolve the problem, Kang et al.(2008) implemented RDD(random digit dialing) method for nationwide sampling in Korea. The aim of this study is to compare an RDD sample with a traditional telephone quota sample that were collected independently by two survey institutes commissioned by the KBS-MBC consortium for the 2007 Presidential Election of Korea.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.52-58
• /
• 2013

This paper proposes an adaptive algorithm based on a method of dynamic error signal generation suitable for signal state by examining the equalizer output signal in blind equalization. In the proposed method, it estimates the error signals using single modulus and multiple modulus each effective to the early stage of equalization or steady-state, and it generates a new error signal from the two error estimates. Two equalizer structures are implemented and their performances are compared: 1-equalizer structure that generates a new error signal by combining the two error estimates weightedly and updates the equalizer using this, and 2-equalizer structure that updates two equalizers respectively depending on the weights of the two error signals. In the proposed method, as the error signals were generated optimally before and after the initial convergence respectively, it was confirmed by computer simulations that the equalizer was updated effectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.1-12
• /
• 2003

In this study, a regime where independent treatment of SETs in transient simulations is valid has been identified quantitatively. It is found that as in the steady-state case, each SET can be treated independently even in the transient case when the interconnection capacitance is large enough. However, the value of the load capacitance $C_{L}$of the interconnections for the independent treatment of SETs is approximately 10 times larger than that of the steady state case. A compact SET transient model is developed for transient circuit simulation by SPICE. The developed model is based on a linearized equivalent circuit and the solution of master equation is done by the programming capabilities of the SmartSpice. Exact delineation of several simulation time scales and the physics-based compact model make it possible to accurately simulate hybrid circuits in the time scales down to several tens of pico seconds. The simulation time is also shown to depend on the complexity level of the transient model.l.