• 대한건축학회논문집:구조계
• /
• 제34권4호
• /
• pp.51-58
• /
• 2018

Various types of pilotis frames are used on the ground level of high-rise buildings. In some cases, their interior finishing is destroyed by strong winds or typhoons. In the case of a corner pilotis, the peak wind pressure coefficients were greater on the ceiling than they were on the wall for all wind angles. Specifically, on the ceiling portion of a pilotis, the coefficient increased gradually from the outside to the inside in a symmetrical form that centered on the corner edge. However, the minimum peak wind pressure coefficient was greater at the center of the ceiling than it was on the edge of the pilotis' interior. Additionally, the higher the height of the pilotis, the greater the peak wind pressure coefficient was due to the turbulent flow that occurs within a pilotis. In this study, we evaluated peak wind pressures to design an interior finishing for the end edge of a pilotis and for corner piloti. In terms of specific wind angles, the maximum and minimum peak wind pressure coefficients were each observed. They were a maximum of $320^{\circ}$ and a minimum of $270^{\circ}$ for corner piloti and $0^{\circ}$ and $270^{\circ}$, respectively, for the end edge piloti.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.71-81
• /
• 2009

본 연구에서는 지진에 대해 보강 효과가 뛰어난 비좌굴 가새를 바탕으로 필로티를 가진 중저층 집합주택에 적합한 비좌굴 knee brace에 대해 총 5개의 실험체를 제작하여 실험을 실시하였다. 이는 공간활용이 우수하고 동선이나 시야를 방해하지 않으며, 시공 방법 또한 간단하여 필로티 층을 가진 중저층 건물에 대해 유리하다는 장점을 가지고 있다. 각 실험체의 변수로는 중심코어의 크기, 외부 보강재의 크기, 단부의 크기 및 형태로 정하였으며 실험결과 중심코어의 크기가 가장 큰 영향을 미치는 것으로 나타났다. 외부 보강재의 크기는 중심코어의 크기에 비해 효과는 미비하나, 파괴거동이나 연성도 측면에서는 영향을 미치는 것으로 나타났다. 실험을 통해 얻어진 힘-변위 그래프는 인장과 압축에서 비교적 안정적인 이력거동을 보였으며 AISC 2005 Seismic Provision 규정에서 제시한 연성도와 에너지 소산능력 측면에서도 충분한 효과를 발휘하였다. 또한 설계 층간 변위비의 2배까지 가력을 실시하였을 때, 가새의 전체 좌굴이나 국부적인 좌굴이 일어나지 않아야 한다는 조항을 만족하는 것으로 나타났다.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.59-67
• /
• 2018

Various pilotis are installed in the lower part of high rise buildings. Strong winds can generate sudden airflow around the pilotis, which can cause unexpected internal airflow changes and may cause damage to the exterior of the piloti ceiling. The present study investigates the characteristics of peak wind pressure coefficient for the design of piloti ceiling exteriors by conducting wind pressure tests on high rise buildings equipped with penetration-type and end-type pilotis in urban and suburban areas. The minimum peak wind pressure coefficient for penetration-type piloti ceilings ranges from -2.0 to -3.3. Minimum peak wind pressure coefficient in urban areas was 30% larger than in suburban areas. In end-type piloti ceilings, maximum peak wind-pressure coefficient ranges from 0.5 to 1.9, and minimum peak wind-pressure coefficient ranges from -1.3 to -3.6. With changes in building height, peak wind pressure coefficient decreases as the aspect ratio increases. Peak wind-pressure coefficient increases with taller pilotis. On the other hand, when piloti height decreases, the absolute value of the minimum peak wind pressure coefficient increases.