Journal of The Geomorphological Association of Korea
/
v.18
no.4
/
pp.177-191
/
2011
This paper describes a dune field on shoreline of Young Gwang. To clarify geomorphic characteristics, made an analysis of grain size of the sand sediments samples and surface texture of quartz grains, and field survey. The following results were obtained : 1) Young Gwang sand dune is taking to pieces by human impact, and dose not move ahead the process of sand dune. 2) there was a turbulence of sand sediments outcrops saying to the cryoturbation that represents cold climatic environments, 3) Constituents of sand dune are mainly fine and very fine sand(2.5~4.5Φ) consisted by quartz and feldspar. Young Gwang sand grians have some analogy with different sites in west coast 4) In surface texture, roundness is thought to have been formed sub-angular, and some V cracks represented mechanical weathering environments. Especially, the dune environment has significant cultural and archaeological values arising from the occupation of human in the past. Those areas where occupation is known provide a valuable source of past records relating to human settlement.
In Joseon dynasty, Gongsin-Gyoseo(Royal Edicts rewarding meritorious vassals) was issued for the reward of the contribution to the specific event of the nation. The family decided as vassals succeeded this Gongsin-Gyoseo as the family treasure to later generations. When one happened to lose this caused by an unavoidable situation such as war in this process, there were a few cases of reissuing of Gongsin-gyoseo by the nation. The confirmative reissued Gongsin-gyoseo among Gongsin-gyoseo that descended down by now are three pieces which is Park dongnyang Hoseong Gongsin-Gyoseo, Gu goeng Jeongsa Gongsin-Gyoseo, and Park jung Jeongsa Gongsin-Gyoseo. This research considered the form and mounting about these three pieces. It was indicated that the reissued Gongsin-Gyoseo was produced following the same form with the original Gongsin-Gyoseo, that is pyeongchul(moving to next lines) and daedu (writing one or two letters ahead compared to the first letter) and so on. But, it was indicated that the change of the position of the vassals in the reissued time was reflected compared to position of the original Gongsin-Gyoseo. In case of Jeonsa Gongsin-Gyoseo, it was indicated that it was 'Wonjongdaewang-whi' since the original Gongsin-Gyoseo was 'Jeongwongun-bu' and the reissued time he became the father of King Injo. Also, it was confirmed that the case of deprivation because of conspiracy such as 'Kim jajeom, Kim ryeon, Sim kiwon, Sim kisung' was produced as the original document and deleted with black ink stick. It was newly confirmed while the original Gongsin-Gyoseo was produced by a designated writer from the nation, the reissuance was written by a writer from the family of the vassals. Since the mounting of Gongsin-Gyoseo could be changed according to the favor and technique of the craftsman participated in the practical production such as Baezeopjang and economical situation of the country supplying the material, the mounting of these three Gongsin-Gyoseo should be different from the original mounting, especially because of the loss of the original by the Manchu war of 1636. The comparison result of Gongsin-Gyoseo produced in the same period with the original issued one in the record of the related Uigwe (a collection of documents from the Joseon Dynasty), the reissued one seems to be larger in the form or ratio of the mounting compared to the first issued one. First of all, the width of Byunah was expanded as twice bigger, center and both side Hoejang also was bigger as over 2cm, and the below Hoejang was expanded as 10cm, and the ratio of the upper Hoejang and the below Hoejang was wider as 1.5 times and the reissuance was 1:1 ratio. The bisect of upper shaft in Park dongnyang Hoseong Gongsin-Gyoseo is assumed as the form of an equilateral triangle, not a half-moon shape of the present, and Gu goeng and Park jung Jeongsa Gongsin-Gyoseo will be the form whose bisection form is same but the size is smaller. Chuksu is confirmed that the size is not changed significantly. Osaekdahoe can be assumed that the width was smaller compared to the first issued one. The 3 pieces of the reissued versions provide the clue of the verification for the form of the mounting of Bosa Gongsin-Gyoseo in the same production period. In the situation that the mounting of the production time was not confirmed among the currently descended Bosa Gongsin-Gyoseo, they can be very important materials.
Objectives : We investigated the prevalence and functional impairment of premenstrual dysphoric disorder (PMDD) and premenstrual syndrome(PMS) in young women. Methods : A total of 1063 female college students were recruited from two urban areas(Seoul and Suwon) of Korea. Questionnaires for sociodemographic data and risk factors of PMDD, attitude about menstruation, and the Premenstrual Symptoms Screening Tool(PSST) were applied. Results : The prevalence of severe moderate to severe PMS and PMDD were 16.9% and 11.7%, respectively. There were differences in the alcohol and coffee consumption, severity of menstrual cramp, and family history of PMS among the moderate to severe PMS, PMDD, and no/mild PMS groups. Although some participants did not fulfill diagnostic criteria for PMDD, they showed significant functional impairment. Participants with negative attitude about menstruation reported premenstrual symptoms more frequently than those with positive or ambivalent attitude about menstruation. Conclusion : These results suggest that PMS and PMDD were prevalent and associated with functional impairment in young females. Some participants reported significant functional impairments although they did not meet the full DSM-IV diagnostic criteria for PMDD. Negative attitude about menstruation was associated with more premenstrual symptoms experiences.
Objectives: The purpose of this study was to determine the optimal master apical file size with minimal transportation and optimal efficiency in removing infected dentin. We evaluated the transportation of the canal center and the change in untouched areas after sequential preparation with a #25 to #40 file using 3 different instruments: stainless steel K-type (SS K-file) hand file, ProFile and LightSpeed using microcomputed tomography (MCT). Materials and Methods: Thirty extracted human mandibular molars with separated orifices and apical foramens on mesial canals were used. Teeth were randomly divided into three groups: SS K-file, Profile, LightSpeed and the root canals were instrumented using corresponding instruments from #20 to #40. All teeth were scanned with MCT before and after instrumentation. Cross section images were used to evaluate canal transportation and untouched area at 1-, 2-, 3-, and 5- mm level from the apex. Data were statistically analyzed according to 'repeated nested design' and Mann-Whitney test (p = 0.05). Results: In SS K-file group, canal transportation was significantly increased over #30 instrument. In the ProFile group, canal transportation was significantly increased after preparation with the #40 instrument at the 1- and 2- mm levels. LightSpeed group showed better centering ability than ProFile group after preparation with the #40 instrument at the 1 and 2 mm levels. Conclusions: SS K-file, Profile, and LightSpeed showed differences in the degree of apical transportation depending on the size of the master apical file.
Objectives : Evidence regarding the association between untreated depression in adolescence and suicidal risk in male young adults is scarce. We aimed to assess the effect of untreated illness during adolescence on the suicidal risk and attempt after that first episode. Methods : As part of a cross-sectional study, between May 2017 and April 2018, a total of 260 patients with currently unipolar or bipolar depression were included in the final analysis. Multiple linear and logistic regression analysis were performed to evaluate the association between untreated mood disorder in adolescence and its effect on the suicidal risk and attempt. Results : In total 260 patients, 189 were classified as untreated group. The proportion of suicide attempts, total depression score, suicidal risk and number of suicide attempts were significantly higher in the untreated group. The most predictive factors of suicide attempts were history of untreated depression [Adjusted Odds Ratio (AOR)=4.19, 95% Confidence Interval (CI)=2.25-7.81, p<0.001] and diagnosis of bipolar depression (AOR=2.60, 95% CI=1.52-4.46, p<0.001). Conclusions : Although the untreated depression suggests higher rates of suicidality, a significant proportion (86.7%) of adolescent depression in this study did not receive psychiatric treatment. Future research should be needed to find better ways to decrease barriers in using mental health treatment and its contribution to reduction and prevention of adverse outcome.
Recently, prestressed concrete(PSC) bridge structures with many repetitive spans have been widely constructed using the segmental construction method in many countries. In these segmentally constructed PSC bridges, there exist many construction joints which is required coupling of tendons or overlapping of tendons to introduce continuous prestress through several spans of bridges. The purpose of this paper is to investigate in detail the complicated stress distributions around the tendon coupled joints in prestressed concrete girders. To this end, a comprehensive experimental program has been set up and a series of specimens have been tested to identify the effects of tendon coupling. The present study indicates that the longitudinal and transverse stress distributions of PSC girders with tendon couplers are quite different from those of PSC girders without tendon couplers. It is seen that the longitudinal compressive stresses introduced by prestressing are greatly reduced around coupled joints according to tendon coupling ratios. The large reduction of compressive stresses around the coupled joints may cause deleterious cracking problems in PSC girder bridges due to tensile stresses arising from live loads, shrinkage and temperature effects. The analysis results by finite element method correlate very well with test results observed complex strain distributions of tendon coupled members. It is expected that the results of this paper will provide a good basis for realistic design guideline around tendon coupled joints in PSC girder bridges.
Journal of the Korea institute for structural maintenance and inspection
/
v.17
no.5
/
pp.94-104
/
2013
Experiments were divided into two parts; one part is to understand the basic properties of high flowable VA/VeoVa-modified cement mortar with different polymer cement ratio (P/C) and the weight ratio of fine aggregate to cement (C:F) and the other part is to investigate the effect of surface water spread on the concrete substrate on adhesion in tension. To understand the basic performance, the specimens were prepared with proportionally mixing VA/VeoVa redispersible powder, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Here, P/C were 10, 20, 30, 50 and 75% and C:F were 1:1 and 1:3. As the change of P/C and C:F unit weight, flow test, crack resistance and adhesion in tension were measured. Three specimens with good adhesion properties were selected among specimens with different P/C and C:F. The effect of surface water evenly sprayed on concrete substrate on adhesive strength is investigated. The results show that surface water on concrete substrate increases the adhesion in tension of high flowable VA/VeoVa-modified cement mortar and additionally improves the flowability compared to the non-sprayed case.
Journal of the Korea Academia-Industrial cooperation Society
/
v.20
no.9
/
pp.481-487
/
2019
Additive manufacturing is a state-of-the-art manufacturing process technology in which three-dimensional structures are fabricated by laminating two-dimensional sections of a structure using various materials such as plastic, ceramics, and metals. The additive manufacturing technology has the advantage of high design freedom, while the surface property (roughness) of the finished product varies depending on the process conditions, which necessitates performing a post-process after the products are manufactured. In this study, the surface roughness of a structure made of polyamide 12, which was manufactured by SLS (Selective Laser Sintering) and MJF (Multi Jet Fusion) process was compared. The processing condition was classified by the building orientation of structure as 0, 45, and 90 degrees, which is the angle between the analytical surface and the horizontal plane of the fabrication platform. Structures with a hole of various diameters ranging from 1mm to 10mm were manufactured and the hole characteristics (ratio of hole depth to diameter) and results of the specimens were compared. As a result of the surface characteristics analysis, the surface roughness value of the specimens manufactured with a building orientation of $45^{\circ}$ was the highest in both technologies. In the case of the through-hole structure fabrication, the shape was maintained with 5mm and 10mm diameter holes regardless of the building orientation, although the hole forming was difficult for the smaller holes.
The purpose of this study was to analyze the alcohol volume consumed and alcohol dependancy according to multiple rounds of drinking. Sectional data collected in 2012 as part of an International Alcohol Control Study were used, and 855 of 1,789 drinker aged 19 to 64 were conducted. The proportion of multiple rounds drinking were significantly higher in males(χ²=37.607, p<.001), students(χ²=52.466, p<.001), single(χ²=34.205, p<.001), smoking experience and stressed(χ²=40,09, p<.001; χ²=21.66, p<.001) among drinkers. In particular, the alcohol volume consumed of unmarried people, smokers, and stress groups were significantly higher than married people, non-smokers and no-stress group. The highest alcohol intake in the first, 2nd and third rounds was found in bars in the liquor trade (F=67.8g, p<0.001). The total alcohol intake increased as the number of rounds increased (F=209.993, p=0.001) and the number of drinkers who tested positive for alcohol dependency increased, using the tests RAPS4 and DSM-IV(F=129.836, p<0.001; F=94.669, p<0.001). The OR of alcohol dependancy in males was 2.3(95% CI: 1.745-3.057), unemployed was 3.2(95% CI: 1.053-9.838), smokers was 3.9(95% CI: 1.230-12.292), and stress group was 2.1(95% CI: 1.561-2.768) compared to females, employed, non-smokers, and no-stress group respectively. In conclusion, it suggests that those consuming multiple rounds drinking can become more vulnerable to alcohol harms due to its relation to smoking, stress and increased dependence on alcohol.
In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.