• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.33-46
• /
• 2019

Even though Korea is strengthening the support for startups due to the limitations of growth policies focusing on large companies, the survival rate of startups is very low, so that there should be more efforts to increase the survival rate of startups. As the existing startup support institutions have provided only fragmentary supports to startups, it would be necessary to have the comprehensive support institutions. As an alternative, the accelerator providing the comprehensive support such as spatial support, education, mentoring, networking, seed investment, and connection for follow-up investment to the initial startups was legalized in Korea of 2016, based on the registration system. Currently, within less than two year from then, there have been much interest in it enough to have about 136 registered accelerators. In the United States, the accelerator was introduced more than ten years ago. In Korea, however, it is still in the initial stage, so that the researches or social consensus on the accelerator are not sufficient. Thus, this study aims to suggest the measures for the development of accelerator and the consensus on the decision making for the selection of accelerator of startups, by researching which parts are considered when startups in the accelerator stage select the accelerator. As a result of the empirical analysis, the factor that has the greatest influence on decision making factors when startup chooses an accelerator was the subsequent investment attraction. This can be explained to the accelerator as desired, considering the factor that the startup of the initial stage places the most importance on growth as investment. We hope that these research results will be sustainable in future research related to accelerators, in hopes that it will be useful for establishing accelerator policies for domestic startups and direction for revitalizing related industries.

• Environmental and Resource Economics Review
• /
• v.21 no.3
• /
• pp.595-625
• /
• 2012

Recently environment-friendly pellet boilers have interests as emissions of greenhouse gases are regulated internationally and energy security becomes more important to oil addicted countries including Republic of Korea. But the Korean market for pellet boilers is on the initial stage due to the high production costs relative to other conventional boilers. Hence the Korean government has supported financially and promoted the pellet boiler business. In this sense, it would contribute market stratergy and effective promotion policy for both of the government and private companies if we can forecast market shares of pellet boilers appropriately. For this purpose, this study surveyed potential consumers' preferences on pellet boilers among various alternatives using a choice experiment reflecting intangible costs. As the market share of new technology increases, intangible costs decline. According to different intangible cost scenarios, we experimented people's preferences on oil, gas, electric, and pellet boilers. A multinomial logit model was employed to estimate coefficient parameters of common attributes for various alternative boilers. Based on the estimates, we forecasted market shares of individual boilers. We found that as intangible costs decline, the market share of pellet boiler increase substantically while market shares of electric and gas boilers decrease dramatically. The market share of oil boiler did not change significantly. Meanwhile, as people are more rich, more educated, and exposed to advertisement on pellet boilers, the likelihood of choosing the pellet boiler increases.

• Journal of Korean Philosophical Society
• /
• v.147
• /
• pp.333-356
• /
• 2018

Shang Yang was a person who, as a representative of the former School of Law, not only had an effect of thought on Han Fei Tzu, but also put a cornerstone of Qin Shi Huang's great universal unification by placing small and weak Qin Dynasty in a border area in the rank of a newly rising powerful nation. He is especially regarded as a person who valued laws and established the theoretical framework of legalist thought of School of Law systematically. To begin with, this writing examines the contents of the enforcement of legal reforms relevant to the prerequisite of Shang Yang's legal thought in historical archives, and confirms that Shang Yang succeeded in accomplishing legal reforms twice and that the aim of the legal reforms was to realize national prosperity and military power for the universal unification. This writing also takes notice of the fact that Shang Yang's legal thought went through specific steps for unifying the legal authority and the power of the monarch. Especially this writing focuses on applying the three-step theory of norms that was presented in the western social and political norm theory to Shang Yang's legal thought and on examining the characteristic and meaning explicitly. In short, the social and political norms go through emergence, cascade, and internalization. This writing aims to confirm that Shang Yang's legal thought also went through these three steps and was specified. Specifying this critical mind, this writing is a result which discusses that Shang Yang's legal thought went though the steps of the selective prescriptivism of emergence, the monarchical absolutism through sever punishment, and the internal monarchism for national prosperity and military power, and that the thought was systemized. Finding that the contents of Shang Yang's legal thought correspond to the three-step theory of norms and produce the individual meaning is the independent characteristic of this writing. It is the aim of this writing that the system and meaning of Shang Yang's legal thought will be confirmed more explicitly through this contextual examination.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.275-286
• /
• 2022

As a first step in the optical design process, we derive a recursive numerical calculation method that can give a solution to the Gaussian equation that the paraxial rays satisfy. Given the refractive power, the angle of incidence to the first principal plane of the lens, the angle of exit to the second principal plane of the lens, and the distance between the principal planes, the radii of curvature of the front and back surfaces of a lens can be obtained by applying the recursive numerical calculation method proposed in this paper according to the thickness of the lens. If a module consists of two or more lenses, the thickness and radius of curvature of each lens can be similarly determined after selecting the distance between the principal planes of the lens under the condition of the design specification while increasing the number of lenses one by one.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.46-51
• /
• 2008

The traditional view of the fate of lignin under anaerobic conditions is that it is recalcitrant because molecular oxygen is required for depolymerization. The presence of lignin is apparently the most important factor affecting the biodegradability of ligneous materials. The initial step in the degradation of ligneous material to smaller intermediates is catalyzed by enzymes secreted by microorganisms and is generally regarded as the rate limiting step in the microbial mineralization of organic matter. Biochemical methane potential (BMP) test, typically used to assess anaerobic biodegradability of liquid wastes with added nutrients and bacteria, have been adapted to assess initial biodegradation of ligneous material under anaerobic conditions. A method based on selective inhibition of microorganism activity, by 3% toluene, has been used to measure using the initial degradation rate of ligneous material and the accumulation of lignin-derived compounds.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.5-9
• /
• 2006

Method for separation and quantification of methylxanthins, catechins, and theaflavins in Korean commercial teas (green, oolong, and black teas) was developed using reversed phase high-performance liquid chromatography (HPLC). After extraction with hot water, tea compounds were separated on Inertsil ODS-3v $(5\;{\mu}m)$ column, eluted with gradient of 7% acetonitrile and 93% of 20 mM phosphate buffer mixture for 7 min. Column effluent was monitored at 270 nm. This technique was effective for analyses of m methylxanthins, catechins, and theaflavins in teas and biological samples. In green and oolong teas, two kinds of methylxanthins and 7 of catechins were identified, whereas 4 theaflavins were only identified in black tea. Among seven catechins in green and oolong teas, EGCG showed highest amount, whereas ECG was highest in black tea. (theaflavins were found only in black teas) In all teas, theobromine content was lower than that of caffeine.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.344-354
• /
• 1998

This study was conducted to evaluate the MSPD and HPLC method about simultaneous determination for residual synthetic antimicrobials of sixteen species such as sulfonamide etc. in livestock products. Elution solvent used in HPLC was ethylacetate:acetonitrile (4:1), and mobile phases for solvent A and B were water:methanol:acetonit rile:phosphric acid (700:250:50:0.2) and 100% acetonitrile respectively. The detector and absorbency used in HPLC was UV 266 nm. This study showed the reduction effect of 99.1% for organic solvents, 94% for experimental steps, 95% for analytical time and manpower and 98.9% for costs compared with korea food standard method. The average recovery rates for chicken, bovine, pork and milk were 67.7% 96.2%, 67.7%~96.6%, 70.0%~96.2%, and 13.8%~97.8%.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.23-23
• /
• 1994

환경에 대한 관심이 높아지는 가운데 용존무기염을 효과적으로 분리하기 위한 많은 기술이 연구되고 개발되었다. 이중 막분리를 이용한 무기염의 제거 방법(역삼투법)은 상변화를 수반하지 않는다는 점에서 많은 주목을 받아왔다. 최근들어서는 2가 이상의 염에 대한 선택적 분리 능력을 가지고 있고, 작동압력이 낮아 에너지 소모가 적은 나노여과법(Nanofiltration)이 폐수나 정수처리에 도입되고 있다. 본 연구는 이러한 나노여과법을 이용하여 무기 염을 제거하는 방법에 관한 것이다. 실험에 사용한 분리 막은 Filmtec사의 NF-40, NF-45 두 가지이고 사용한 모듈은 평탄형과 나관형의 두 가지이다. 대상이 되는 폐수는 소석회 처리 단계를 거친 산 폐수로 주로 $Ca^{2+},So_4^{2-}$등의 2가 이온과 Na, Cl등의 1가 이온으로 구성되어 있다. 여기서 $CaSO_4$는 스케일을 형성할 가능성이 크므로 1가 이온에 비해 제거할 필요성이 크지만, 비교적 용해도가 높고 과포화 되는 성질이 커서 처리에 어려움이 있다. 이러한 폐수를 나노여과하였을 때 NF-45 평판평 막의 경우 농축 인자 2.6 부근에서, NF-40 나관평 막의 경우 농축 인자 3 부근에서 막 투과 유속의 급격한 감소가 관찰되었다. 이 때 용액 내 전도도와 용액 내 입자의 분포 변화를 종합하여, 평판형 모듈과 나관형 모듈의 막 오염 현상에 대한 메커니즘을 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.16-16
• /
• 2017

기후 시스템의 다양한 상호작용으로 인해 나타나는 대표적 현상인 강우는 수문학적 분석 과정의 필수적인 요소이며 장기 강우를 예측하는 것은 효율적인 수자원 관리에 중요한 기반이 되고 있다. 이러한 강우는 장기적으로 지구의 대기-해양 순환 패턴의 영향을 받으며, 특히 엘니뇨와 라니냐와 같은 기상 이변이 발생할 경우 대규모 순환에 변화가 일어나게 되어 강우에 영향을 미칠 수 있다. 따라서 본 연구에서는 지구의 순환 패턴 특성을 수치화한 전지구적 기상인자 중에서 우리나라 장기 강우를 예측하기 위한 기상인자를 선정하고 시계열 모형 구축을 통하여 예측력을 평가하였다. 이를 위해 강우에 내재된 다양한 대기-해양 순환 패턴으로부터 나타나는 주기적 요소를 추출하기 위해 앙상블 경험적 모드분해법을 사용하여 강우를 분해한 후, 각 분해된 강우자료와 전지구적 기상인자와의 상관성 분석을 통해 높은 상관성을 가진 기상인자를 선별하고 단계식 변수선택법으로부터 유의미한 기상인자를 최종적으로 선정하였다. 그 결과, 우리나라 기상청 60개 지점의 월별 강우자료 중 전반적으로 영향을 미치는 기상인자를 선정할 수 있었으며, 선정된 기상인 자로 구축된 시계열 모형을 통해 우리나라 장기 강우를 예측하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.533-541
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.