• 패션비즈니스
• /
• 제27권3호
• /
• pp.96-114
• /
• 2023

In modern society, there is a tendency to prioritize both fashion and comfort, with a preference for loose-fit clothing that enhances mobility. While darts may not be visibly present on the garment's exterior, their effects should be dispersed and incorporated into the design. However, there is a significant lack of systematic research on dartless patterns in the current state. Therefore, this study focuses on investigating dartless patterns used in loose-fit clothing tailored to the body measurements of women in their 20s. The objective of this research is to develop foundational dartless patterns that serve as a basis for diverse design possibilities in loose-fit clothing. To achieve this purpose, seven dartless patterns introduced in clothing construction references were selected for the production of experimental prototypes, which were then subjected to visual evaluations by a panel of experts. Based on the evaluation results, superior patterns were selected and they underwent modification and improvement to develop the research patterns. The developed research patterns were derived through the formulation of calculation formulas, and based on these formulas, garments were produced. Subsequently, a second round of visual evaluations was conducted by a panel of experts, and notable improvements were observed in most of the aspects assessed. However, it should be noted that this study was limited to women in their 20s it did not explore a wide range of fabrics. Therefore, further research is needed in the future.

• 대한가정학회지
• /
• 제44권3호
• /
• pp.91-102
• /
• 2006

The following research compares the two apparel systems that are used in Korean colleges, Gerber and PAD, by analyzing the advantages and disadvantages of their Dart-related functions in the pattern construction process. The results are as follows. 1. Regarding transformation methods, the Gerber system was able to use pivot method, while the PAD system was able to use both pivot method and slash methods. in other issues, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart could be produced only in the PAD system, while curvy shaped Dart could not be produced in either system. 2. The change in side lines due to the change of Dart width only occurred in the PAD system, while the change in Dart length only occurred in the Gerber system; both systems need improvement. 3. As for the pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes which need to be corrected. 4. We first constructed a Dart shape composition chart according to the number of Darts. Based on this, we examined whether they have appropriate shapes. Among single-Darts, the Gerber system had an inappropriate, outer-line shape for Underarm Dart and Center Front Dart, and among two-Darts, it was inappropriate for Side and Waist Dart.

• 복식문화연구
• /
• 제15권2호
• /
• pp.193-202
• /
• 2007

The purpose of this study was to find out effects of textile motifs and the application methods on wearer's image perception. A survey was conducted to total of 255 male and female university students who are residing in Daejeon and Chungnam province. The stimuli were composed of 2 level tones(dark and light), 3 level complexity(simple, medial and complex), 3 patterns(polka dot, stripe and check) and the 2 way of stimuli application methods(fabric and garment). The instrument for measuring preference of stimuli consisted of 4 items, encouraging, preference, purchasing and popularity. The instrument for measuring image of stimuli consisted 24 pair items. Factor analysis for the adjective pair images(24 inquiries) about the textile patterns which were used in this study was performed. It resulted as three factors which are attraction, salience, and potential. Attraction, salience, and potency dimensions showed the most significant interaction effects of application methods and patterns. And tone and application method effected attraction and salience, tones and patterns effected attraction, tones and complex effected salience. Application methods and patterns effected potential and patterns and complex effected salience. The preferences toward stimuli, it resulted only interaction of tones and patterns affected the preferences('total preference' and 'purchasing'). Pearson's product-moment correlation analysis carried out to find out the relation of images of clothing and preferences. As a result, salience was significant relation with attraction and potency. In correlation between image of textile pattern and preference, attraction is most significant relation with the preference. The results of the study could be used for the marketing strategies of the motif in fashion product.

• 복식
• /
• 제66권4호
• /
• pp.146-165
• /
• 2016

The aim of the study is to propose ways to improve the break line fit of women's tailored collar vests by modifying the patternmaking process. The study explored the fit effects of experimental vests with a focus on 3 different breast sizes, A, B, and C cups. Women in the ages between 20 and 24 in South Korea were targeted. In order to carry out the objective, the study implemented separate girth measurements for the front and the back of the tailored collar vests, and also allocated different dart amounts on the lapel through the break line according to the different breast cup sizes. The study adopted a 5-point rating scale to perform evaluation of the different fit effects caused by the varying dart amounts given on the experimental vests' break lines. This evaluation was carried out by apparel pattern experts. The results derived from the study were as follows: first, the implementation of separate girth measurements provided originality to the study, as the application of different measurements for the waist back length and the neck shoulder point-to-breast point-to-waist line led to the front panels of the experimental vests having varying slack amounts. Second, break line dart was applied in three different amounts, 0.5, 1.0, and 1.5cm respectively according to A, B and C breast sizes, and as the dart amount increased, extra ease on the break lines was reduced. The dart was applied on the edge lines of the lapel and it was applied from a point which was 6cm above the breast point to the end of the princess line for all the breast cup sizes.

• 한국컴퓨터정보학회논문지
• /
• 제25권11호
• /
• pp.167-178
• /
• 2020

본 연구는 소재 특성, 맞음새, 여밈 등을 고려하여 변화되고 있는 신한복 저고리의 패턴을 비교 분석해봄으로써 시판 신한복 브랜드 간의 저고리 패턴의 차이를 알아보고자 하였다. 6개 제품을 구매, 분해한 후 분해 패턴을 가지고 분석을 실시하였다. 저고리 형태의 경우, 1, 3, 6브랜드의 경우 다트가 없는 형태를 나타냈고 5브랜드는 프린세스라인으로 인체의 입체감을 표현하였다. 외관 평가결과, 5브랜드가 앞품너비의 여유량, 뒤소매진동의 군주름을 제외한 대부분의 항목에서 가장 높게 평가되어 외관이 가장 우수한 것으로 분석되었다. 의복압은 1브랜드의 경우 다른 브랜드의 제품보다 가슴둘레가 작고 어깨폭이나 길이도 짧아 착용 후 당김 현상이 발생하였다. 신한복에 대한 수요가 증가됨에 따라 기성복화하여 사이즈 체계에 대한 확립이 필요할 것으로 생각된다.

• 복식
• /
• 제46권
• /
• pp.67-88
• /
• 1999

텍스타일의 발전에 있어서 진보적 기술혁신은 합성섬유의 잠재력을 높이는데 큰 촉매 역할을 해왔는데 그 중 가장 두드러지게 성공적인 분야는 바로 스트레치 직물 분야이다. 스트레치는 그자체의 다양한 종류와 변화무쌍한 특성과 함께 스포츠 웨어, 캐주얼웨어 뿐 아니라 최근에는 정장류 남성복에 이르기 까지 그 사용범위와 미적 표현이 크게 증가되고 다양해졌다. 스트레치의 미는 기능적이고 편안하면서도 직물자체의 유동적인 특성과 함께 인체와 더불어 표출되는시각적 이미지가 현대미에 새로운 개념을 더하고있다는 데에 그 가치가 있다. 본 연구목적은 현대 패션디자인에 표현되어진 스트레치의 미적 개념과 가치가 무엇인가를 발견하는데 있다. 특히 섬유과학기술의 진보로 인한 스트레치 직물의 다양함과 그에대한 디자이너들의 패션철학과 디자인의 다양한 변화를 강조하고 나아가 다음세기를 위한 보다 나은 디자인의 방향을 제시해 보고자한다. 연구결과는 다음과같다. 1, 스트레치의 가장 두드러지는 현대적 미는 편안함과 기능성에 있다. 특히 스트레치 직물 자체가 더욱 가벼워지고 강해지면서 현대생활과 미래생활에서 가장 크게 중시되고 있는 comfortable & functional 의 이상적인 개념을 충적시켜 주고 있다. 2. 스트레치 직물의 유동적특징에서 대표적으로 나타난 스타일은 바디스트인데 이것은 스트레치 자체의 신축성이 기본적으로 인체곡선 위에서 표현되어진 것으로서 거의 비슷한 스타일의 uniformity 현상을 낳게 되었고 또한 인체선의 드러남으로 인해 'healthy'이미지 추구라는 현대미의 새로운 개념을 가져왔다. 2. 더욱 정교해진 스트레치는 결국 transparent look을 낳았고 또한 비치는 직물들을 겹쳐입는 layering 현상을 가져왔는데 이것은 현대적 순수미와 여성미가 시감각적 이미지로 표현되어진 것이라 할수 있다. 4. 스트레치가 되므로서 생기는 긴장은 다른 디자인 요소들에 대해서는 극히 단순한 것을 요구하면서 결국 simplicity를 동반하게 되었다. 5. 스트레치는 디자인 구성 요소들의 보다 작은 개념을 낳았는데 즉 더욱 좁아진 형과 작아진 사이즈 없어지거나 줄어든 다트와 구성선 그리고 그에따라 줄어든 공정과 낮아진 가격이다. 이 개념은 현대미의 minimalism의 한 현상으로 해석되어지며 스트레치 직물은 여기에 가장 부합되는 소재가 되었다. 6. 스트레치의 시각적 이미지는 그자체가 'easy' 'free'느낌과 함께 보편적이면서 미래적이다. 이상으로 볼 때 미래의 패션은 보다 진보적인 섬유과학발전에 힘입어 21세기의 새로운 환경에 잘 적응 할 수 있는 합리적이면서도 미적 가치가 내포된 인간에게 보다 친숙한 디자인으로 전개되리라고 생각되어진다.

• 한국의류학회지
• /
• 제33권2호
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• 대한의용생체공학회:의공학회지
• /
• 제34권2호
• /
• pp.55-62
• /
• 2013

Wrist joints consist of irregularly shaped carpal bones and other complicated structures. Thus, evaluating the motion of a wrist joint is a challenging task. In this study, we used an infrared camera to perform a kinematic analysis of a dart-throwing motion. We measured the difference between the movement of a normal wrist and constrained wrist (wrist with a wrist glove) in the dart-throwing motion with thirty six healthy participants. We measured the ulna flexion - radial extension motion using the attached passive marker and analyzed it using Polygon software and SPSS. The pitch and yaw motions with a glove was bigger than the ones without a glove by 20 and 15 degrees, respectively. On the other hand, the roll motion without a glove was bigger than the one with a glove by 7 degree. Wilcoxon signed rank test (p<0.05) confirmed that there are significant differences between the motion with and without a glove. It was found that the magnitude of the pitch and yaw motion with a constrained wrist joint toward radial extension in dart-throwing motion is smaller than the one with a normal wrist joint. However, a normal wrist joint showed a bigger movement in the roll direction.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.467-476
• /
• 2010

The purpose of this study was to develop a plausible methodology based on experimental data how to set up darts and split lines on 3D parametric body dressed with tight-fit garment. The results were as following: Through the process of making convex hull, the concave parts were straightened to make a convex hull, especially in the center part of bust, under breast part and scapular part. To figure out the optimum positions of darts and split lines, the inflection points of curve ratio were searched along the horizontal polylines of waist and bust. This procedures produced reliable results with low deviation. Using Rapidform, CATIA and Unigraphics, six patches of bodice patterns were drawn and aligned. Paired t-test results showed the outline and area between 3D surface and 2D were not significantly different, meaning this method could be adaptable when flattening 3D surfaces. The amount of waist dart measured on the pattern showed that the highest portion was allocated on 2nd dart(back), followed by 1st dart(back), 1st dart(front), 2nd dart(front)/side dart, and center back dart. A series of findings suggested that curve ration inflection point could be used as a guide to set up darts and split line on 3D parametric model with low deviation.