• Geotechnical Engineering
• /
• v.6 no.4
• /
• pp.19-32
• /
• 1990

Generally foundation is composed of complicated multi - layers. Primary objective of this study is to perform numerical analysis on the distribution of stresses on the subgrade with the variation of constitutive equations, the structures and the depth of layer, rigidity, loading condition, etc. Multi - layered soils has been treated as Burmister's elastic model. However, in this research it was intended to analyzed the distribution of stresses on the subgrade with all of the multi - layered soils by using the EVP(elasto - viscoplastic) model, one of the numerical program based on the Biot's equation as governing equation. The numerical results are compared with those by the Burmister's and the Fox'method, which in turn proves to be satisfactory. This research is aiming at investigating the mechanism of stress transfer within a foundation by using computer program for multilayers foundation.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.65-66
• /
• 2015

다층퍼셉트론은 학습성능이 우수하여 많은 패턴인식 문제에 응용되고 있다. 그 응용문제 중 하나인 갑상선 질환 진단 문제는 학습이 어려운 문제이다. 이 논문에서는 다층퍼셉트론으로 갑상선 진단 질환을 학습하는 여러 방법을 비교하고, 성능이 좋지 않은 원인을 토대로 성능 향상을 위한 방법을 제시하겠다.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.5-12
• /
• 1985

Ocassionally it is used for simple extensions of Terzahgi's theory to account for time-depend- tint loading but there is little evidence of application in more complicated consolidation theories that take into account such effects as nonlinear stress.strain, layered systems or large strains. The purpose of this paper provides an efficient computer algorthm based on numerical analysis using finite difference method which account for multi-layered soils to determine the degree of consolidation and excess pore pressures relative to time and positions more realistically. The explicitly scheme of solving the consolidation equations has been investigated from the point of view of the stability conditions and the convergence with variance of the operator as well as to obtain an optimal divided depth ratios of total depth. A comparison of the settlement predictions with both the classical analysis and the algorithm based on numerical analysis indicates that the new algorithm scheme is found to be superior to the classical theory in the layered soils.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.473-481
• /
• 2013

The purpose of this research is to evaluate the improvements in the strength and injection range of loose ground after injecting $CaCO_3$(created by microorganism reaction). For this purpose, three cases of single-layer (Sand, SP, SW) specimens were made in a 150mm D ${\times}$ 200mm H space and two cases of multi-layer specimens (SW/SP, SP/SW) were made in a 150mm D ${\times}$ 300mm H space. The specimens were made with a relative density of 30% of soft ground and an injection was given over a time of one day. The uniaxial compression strength was measured with a cone penetrometer and the injection range was observed by checking the bulb formation around the injection nozzle. Also, the compositions of the specimens were assessed through XRD analyses. Based on the test results, a compressive strength of 500kPa and 15cm thick cementation were noted due to the cementation of the soil. This implies that there are significant effects of the pore condition and size on bio-grouting technology.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.5-13
• /
• 2003

The soil nailing is one of the useful support-system in urban excavation because of the presence of other structures in the vicinity Since the soil nailing system was introduced, model experiments and theoretical studies have been performed to investigate behavior of soil nailed wall. However, there are few data in the case of multi-layered soil strata just like Seoul Metropolitan area in Korea. The feed back analyses are carried out using the measured wall displacement data for soil nailing construction sites with multi-layered strata in order to analyze the distance and the coefficients of extension zone of ground behind soil nailed wall. As a result, the distance of extension zone increased with increasing of the final excavation depth and the ratio of the distance to the final excavation depth was shown to be about 94% of the final excavation depth. Also, the coefficients of extension zone increased with enlargement of soil layer thickness and converged into constant value of 1.05. On the other hand, the maximum vertical displacements by the feed back analysis and Caspe's method were shown to be approximately 80%, 150~280% of the maximum horizontal displacement respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.205-215
• /
• 1992

Load tests for fourteen small-scale foundation models combined with geotextile, sand mat and rigid mat were conducted to study the effect of geotextile(G/T), sand mat(S/M), and foundation types on deformation of foundation soils. In addition, the experimental results were compared with those obtained from numerical analysis using a software program. The main conclusions were summarized as follows: 1. The restraint effect on G/T is more outstanding on the lateral displacement than on the vertical one. 2. The single use of S/M has better effect on the restraint of vertical displacement than lateral one. 3. The use of both S/M and G/T is required for the restraint of lateral and vertical displacement. 4. Multi-layered foundation with large rigidity shows similar tendency to that of foundation reinforced with S/M and G/T.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.5
• /
• pp.59-69
• /
• 2013

본 연구에서는 동적 점탄-점소성 구성식에 기초한 다층지반의 1차원 액상화 해석을 수행하였다. 일본 고베 포트아일랜드에서 발생한 1995 Hyogoken Nanbu 지진에 대하여 지반 모델링을 하였으며, 사질토 지반에는 탄소성 모델을, 점성토 지반에는 점탄-점소성 모델 및 탄-점소성 모델을 각각 적용하였다. 본 연구 결과, 모델 지반의 경우 지표 10 m 아래를 전후하여 액상화가 발생하였으며 액상화가 발생한 지반을 통과하는 지진파는 감쇠특성을 나타내고 이 때 전단변형률을 크게 증가시켰다. 또한, 대변형률 영역에서의 점성토의 동적거동 해석에서는 점소성 거동특성이 지배적이므로 점소성 모델의 적용이 중요함을 알 수 있었다. 한편 동적 점탄-점소성 구성모델은 대변형률 영역에서 점성토의 소성변형을 유발하는 대형 지진 발생시 점성토의 증폭 및 감쇠특성 분석에 적용 가능한 모델임을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.65-65
• /
• 2022

울창한 숲에도 어느 정도 햇빛은 들 듯이, 태양복사에너지는 식생의 잎과 흙에 모두 미치며, 그로 인해 증산과 증발이 각각 발생한다. 이러한 사실을 반영하는 것은 현존하는 증발산 산정 방법을 개선하여 더 나은 증발산 추정치를 구하는 데에 도움이 될 것이다. 이 연구에서는 증발 표면을 수직적으로 흙층(soil layer)과 잎층(canopy layer)으로 나눠진 다층 구조로 바라보고, 각 층에서 증발산을 계산하는 방법을 도입했다. 증발 표면을 수직 상에서 구분했기에 각 층의 환경 조건은 그 층을 대표하는 높이에서 관측된 기상자료를 활용할 수 있다. 또한, 식생 활기에 따른 각 층의 복사에너지 유입량과 기공의 여닫힘에 따른 Bowen 비를 통해 식생이 증발산에 미치는 영향을 반영하는 것이 가능하다. 본 연구에서는 Fluxnet에서 제공하는 공분산 방법(eddy covariance method)으로 측정한 자료를 참고하여 다층 구조가 실제 증발산 산정에 타당한가를 논했다. 시스템 내 변화는 주어진 조건에서 엔트로피가 최대로 생성되는 방향으로 발생한다는 Maximum Entropy Production (MEP) 이론을 기반으로 만들어진 증발산 산정법을 통해 각 층의 증발산을 계산했으며, 관측 증발산을 토대로 잎층과 흙층에 유입된 복사에너지의 크기를 비교했다. 결과적으로 잎층에 계산된 복사에너지 흡수능이 낙엽수림의 변화 주기를 잘 반영하는 것을 확인했으며 다층 구조를 도입하는 것이 증발산 산정 향상과 수문-식생 관계를 고려한 증발산 분석에 적절한 접근법임을 보였다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.35-45
• /
• 2016

Estimation of vertical bearing capacity is critical in the design of bucket foundation used to support offshore structure. Empirical formula and closed form solutions for bucket foundations in uniform sand or clay profiles have been extensively studied. However, the vertical bearing capacity of bucket foundations in alternating layers of sand overlying clay is not well defined. We performed a series of two-dimensional axisymmetric finite element analyses on bucket foundations in sand overlying clay soil, using elasto-plastic soil model. The load transfer mechanism is investigated for various conditions. Performing the parametric study for the friction angles, undrained shear strengths, thickness of sand layer, and aspect ratios of foundation, we present the predictive charts for determining the vertical bearing capacities of bucket foundations in sand overlying clay layer. In addition, after comparing with the finite element analysis results, it is found that linear interpolation between the design charts give acceptable values in these ranges of parameters.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.43-50
• /
• 2000

This paper presents the measured performance of in-situ walls using the measured data collected from various deep excavation sites in urban area. A variety of in-situ wall systems from 57 sites were considered, including H-pile walls, soil cement walls, cast-in-place pile walls, and diaphram walls. The examination included lateral wall movements as well as apparent earth pressure distributions. The measured data were thoroughly analyzed to investigate the effects of various components of in-situ wall system, such as types of wall and supporting system, on the lateral wall movement as well as on the apparent earth pressure distribution. The results wee then compared with the current design/analysis methods, and information is presented in chart formes to provide tools that can be used for design and analysis. Using the measured data, a semi-empirical equation for predicting deep excavation induced maximum lateral wall movement is suggested.