• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2005년도 춘계학술발표논문집
• /
• pp.79-82
• /
• 2005

본 논문에서는 PCB의 제작 공정에 있어 기준구멍을 가공하기 위한 다축드릴머신의 PCB와 드릴날 간의 충돌시험을 구하여 설계에 반영한다. 이는 PCB 가공을 대량생산에 적합하고 정확성을 높이기 위해 PCB용 다축드릴 머신을 설계함에 있어 해석결과를 이용하여 안전성확보와 제작단가를 절감할 수 있다.

• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.412-417
• /
• 2005

본 논문에서는 PCB의 제작 공정에 있어 기준구멍을 가공하기 위한 다축드릴머신의 PCB와 드릴날 간의 충돌시 힘을 구하여 설계에 반영한다 이는 PCB 가공을 대량생산에 적합하고 정확성을 높이기 위해 PCB용 다축드릴머신을 설계함에 있어 해석결과를 이용하여 안전성확보와 제작단가를 절감할 수 있다.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.79-83
• /
• 2001

A verification of multi-spindles drilling NC data is presented. The drilling of multi-spindles can offer productivity over three times as fast as that of single spindle. The most important things in machining tube sheet are precision of hole position and machining time. The drilling of multi-spindles has difficulties in controlling many motors to drive spindles and assign a correspondent number to each spindles. Multi-spindles drilling has different codes from CNC milling ; many subroutines, assignment of spindle, and so on. The conventional method, which inspects the NC code of the drilling, is to drill holes on a thin plate or tube sheet previously. The method results in low productivity because it consumed long machining time and welding for correction. This paper describes details of multi-spindles NC code and operation of multi-spindles drilling machine. A verification software of the multi-spindles drilling NC code is developed on the details.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.263-268
• /
• 1999

The most important things to the tube the of the heat exchanger are the precision of t hole position and the quality of the drill face. Nowadays, 6 and 12 spindle multi-drilling machine controlled by CNC or used to drill holes of the tube sheet. The drilling of 12 axes can offer high speover three times as fast as the drilling of axis. However, the drilling of 12 axes h difficulty in controlling many motors to d spindles and assigning a corresponded numbe accurately to each axis. In the past, conventional method to inspect the code the drilling was machining holes on a thin plate previously which resulted in the productivity because it required a h production cost by machining and weldin time. In this thesis, there are two drilling codes different from CNC code. M code is used to control many motors and S code is used to assign a correspondent number for each axis. For increasing the productivity by removing process, this paper is intended to take simulation of the drill machining c including 6 and 12 axis on the persona computer.