• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.465-466
• /
• 2011

이 연구는 일본식 배수공이 설치된 제방의 침투 흐름을 비정상 상태로 SEEP/W 모형을 사용하여 해석하고 모형의 적용성을 평가하기 위해 수행하였다. 수치모형의 적용성 평가를 위해 비정상 상태로 제방 침투에 대한 수리모형실험을 수행하였다. 제체 재료는 경상북도 구미시에 위치한 해평천의 제방 건설 현장의 재료를 사용하였고 일본식배수공은 굵은 골재와 부직포를 사용하여 실험실에 제방 축소 모형을 수조 내부에 제작하였다. 모형제방은 제방축조 방법과 유사하게 다짐을 하기 위해 흙을 쌓으면서 0.20 m 높이마다 다짐을 실시하였다. 다짐방법은 고무망치를 이용한 층다짐을 하였다. 제방 제외지에 0.55 cm/min의 속도로 수위를 증가하여 15분 간격으로 각 0.3 m, 0.4 m, 0.5 m 수위에 따른 비정상 상태의 위압계 측정을 수행하였다. SEEP/W 모형의 매개변수는 투수계수와 입도분포도, 불포화 함수특성곡선(값을 산정하기 어려움)이 있으며, 각 매개변수에 대한 민감도 분석을 수행하였다. SEEP/W 모형의 모의 결과는 수리모형실험 결과와 비교적 잘 일치함을 알 수 있었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.674-677
• /
• 2010

본 논문에서는 지반에 매립된 파이프에서 전파되는 유도초음파의 종파 모드 특성을 분석하였다. 지상 배관과는 달리 매립 배관에서는 주변 매질로 유도초음파의 누설이 발생할 수 있으며, 이로 인하여 유도초음파의 감쇠가 상대적으로 커질 수 있다. 따라서 본 연구에서는 유도초음파의 여러 특성들 중 종파 모드의 감쇠 특성을 중점적으로 분석하였다. 감쇠에 영향을 미치는 지반의 파동 특성(밀도, 체적종파속도, 체적횡파속도)을 결정하기 위하여 포화도와 다짐을 고려하였다. 포화도가 증가할수록 지반의 체적종파속도와 체적횡파속도는 감소하며, 다짐된 지반은 밀도와 체적종파속도, 체적횡파속도를 증가시킨다. 이와 같은 조건으로 결정된 지반의 파동 특성치와 배관의 물성치를 바탕으로 유도초음파 종파 모드의 감쇠 곡선을 계산하고, 특성을 분석하였다. 결과적으로 포화도가 증가할수록 종파 모드의 감쇠는 감소하는 경향을 나타내었고, 다짐이 증가할 경우 감쇠는 전반적으로 증가하는 경향을 나타냄을 알 수 있었다.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.55-63
• /
• 2007

Deformational characteristics of subgrade soils are important properties in the mechanistic analysis and design of pavement system. In this study, to evaluate the effect of specimen construction methods on deformational characteristics of subgrade soils in Korea, resonant column tests were performed for specimens constructed by various methods. Specimen construction method affected to the modulus value but the variation in the normalized modulus reduction curve was almost identical. The effects of specimen construction method on modulus are decreased with increasing confining pressure. The average maximum variation in the modulus value with different specimen construction methods was estimated as 16.8%. The differences in the modulus value of the specimens with same water content and dry density conditions that made by gyratory compaction and impact compaction were very small within 5.2%. The impact compaction method was proposed as a specimen construction method for determining the design input parameter testing considering that impact compaction method is much simpler and require less expensive specimen construction equipment and setup than gyratory compaction method.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.31-36
• /
• 2012

Recently, industrial by-products are exponentially growing because energy consumption is increasing due to rapid industrial development and improved living standards. The purpose of this study is to determine the proper mixing ratio to meet the liner conditions(must be less than $1{\times}10^{-7}$cm/sec), using pond ash and bentonite as liner. As the result of the compaction test, depending on the increase mixing ratio of bentonite, the maximum dry unit weight was decreased but the optimum moisture content was tended to be increased at the compaction curve. As the result of the permeability test, depending on the increase mixing ratio of bentonite, the coefficient of permeability showed tendency to be decreased in the form of index and the tendency was caused by the hydration reactions filling the void of the pond ash. When the mixing ratio of bentonite was approximately over 15%, it was satisfied with the land fill liner conditions. In other words, it is necessary to consider other mixtures containing the cement or another material in the economical aspect for application of the pond ash.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.1
• /
• pp.37-43
• /
• 2015

Korea has four distinct seasons, showing hot and humidity in summer and cold weather lasted in winter. Domestic research on earth work has been developed according to the seasonal characteristics, and most of research topics have focused on the effect of freezing-thawing on the performance of geo-materials. However, the previous research was performed on the ground compacted at room temperature and therefore, the effect of the sub-zero temperature at the time of construction was not fully investigated. The ground characteristics compacted at freezing temperature can be different from those at room temperature and show different characteristics of strength and deformation caused by freezing and thawing. Therefore, the compaction tests on sandy materials were conducted under various temperature at $-3^{\circ}C$ and $-8^{\circ}C$ with various fine contents of 0%, 5%, 10% and 15% in weight fraction. The effectiveness of soil compaction at below-freezing temperatures were compared with the compaction at room temperature at $18^{\circ}C$ in terms of the maximum dry unit weight and optimum water contents. Based on the test results, the maximum dry unit weight tends to decrease with the freezing temperature and the relative compaction at $-8^{\circ}C$ can not be satisfied with general specification standard.

• International Journal of Highway Engineering
• /
• v.7 no.1 s.23
• /
• pp.49-61
• /
• 2005

The dynamic modulus of hot mix asphalt can be determined according to the different combinations of testing temperature and loading frequency. The superposition rule is adapted to get the master curve of dynamic modulus for each hot mix asphalt. There are couple of different methods to get the shift factor which is a key for making the master curve. In this paper, Arrehnius, 2002 AASHTO, and experimental method was employed to get the master curve. Evaluation of dynamic modulus for 25mm base course of hot mix asphalt with granite aggregate and two asphalt binders(AP-3 and AP-5) was carried out. Superpave Level 1 Mix Design with gyratory compactor was adopted to determine the optimum asphalt binder content(OAC) and the measured ranges of OAC were between 4.1% and 4.4%. UTM was used for laboratory test. The dynamic modulus and phase angle were determined by testing on UTM, with 5 different testing temperature(-10, 5, 20, 40, & $55^{\circ}C$) and 5 different loading frequencies(0.05, 0.1, 1, 10, 25 Hz). Using the measured dynamic modulus and phase angle, the input parameters of Sigmoidal function equation to represent the master curve were determined and these will be adopted in FEM analysis for asphalt pavements. The shift factor and activation energy for determination of master curve were calculated.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.1
• /
• pp.41-52
• /
• 2011

The hypothesis on effective stress of unsaturated soil is validated by $K_0$ consolidation results of triaxial tests for the compacted residual soil. The stress characteristic curve (SSCC) can describe unsaturated soil behavior on water contents, which was defined from shear strength or from soil water characteristic curves. In this study, it was found that the stress path of $K_0$ consolidation can also define the SSCC. The effective stress was defined by SSCC. $K_0$ paths for various matric suctions could be described as a unique line by effective stress. The measured values of $K_0$ were interpreted by effective stress as a constant with respect to matric suction. Since the SSCC from $K_0$ consolidation agrees with that from the shear strength, the SSCC from soil water retention curve could describe effective stress behavior consistently on both $K_0$ consolidation path and stress at failure. The effective stress based on SSCC can describe the entire unsaturated behavior from consolidation to failure.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.27-35
• /
• 2004

The goal of this study is to investigate the feasibility of the reference state approach in determining the generalized soil-water characteristic curve that is essential fur characterization of unsaturated soil behavior. The soil-water characteristic curves are obtained from a number of specimens of fine-grained residual soils compacted with different void ratios. Based on the experimental test results, the feasibility of using the liquid limit state as the reference state for predicting the soil-water characteristic curve is verified. Finally, through the regression analysis of experimental data using the equation of Fredlund and Xing (1994), a reliable method is proposed to predict the generalized soil-water characteristic curve of fine-grained residual soils using the liquid limit state as the reference state.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.105-113
• /
• 2018

In this study, the engineering properties including bearing capacity of subgrades stabilized with a binder are analyzed by laboratory and field experiments. The main components of the binder are CaO and $SO_3$. After the binder was mixed with a low plasticity clay, the passing rates were relatively decreased as the sieve mesh size increased. Not only did the soil type change to silty sand, but engineering properties, such as the plasticity index and modified California bearing ratio (CBR), were improved for the subgrade. A comparison of the compaction curves of the stabilized subgrade and field soil compacted with the same energy demonstrated an increase of approximately 6% in the maximum dry unit weight, slight decrease in optimum moisture content, and considerable increase improvement in grain size. In the modified CBR test, the effect of unit weight and strength increase of the modified soil (with a specific amount of binder) was remarkably improved. As the proportion of granulated material increased after the addition of binder, the swelling was reduced by 3.3 times or more during initial compaction and 6.5 times by final compaction. The unconfined compressive strength of the specimens was maintained at the homogeneous value with a constant design strength. The stabilized subgrade was validated by applying it in the field under the same conditions; this test demonstrated that the bearing capacity coefficients at all six sites after one day of compaction exceeded the target value and exhibited good variability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.107-116
• /
• 1983

This paper is concerned with the permeability through a decomposed granite soil layer which is influnced by change of grain sizes and crushed soils made by varied compaction energy. The change in the content of crushed soils can be described in terms of the ratio of surface area ($S_w{^{\prime}}/S_w $). The experiments were carried out to obtain the relationships of the coefficient of permeability(K) versus the optimum moisture content($w_{opt}$) by the variable head permeability test with the samples that were preapared by compaction test. The results are found as follows; (1) By the change in compaction energy, the crush ratio increased whereas the void ratio decreased with a larger maximum dry density running in parallel with the zero air void curve. (2) The ratio of surface area was $0.33(P)^{0.96}$ in $S_w{^{\prime}}/S_w $ with no relation to the compaction energy. (3) The grain size which produced the largest crush of soil particles ranged from 0.5 to 1 millimetre (4) The relationship of K versus $e^3$/1+e appeared as a straight line on the full-log-scale paper under the optimum moisture state. (5) As the compaction energy was larger, the passing percentage of #200-sieve grains increased linearly. The increment in the surface area ratio was deemed to have been caused by the decreased in the permeability.