• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.583-588
• /
• 2007

It is easy to implement a temporary network with a mobile ad-hoc network in which mobile nodes have without using a infrastructure network. They depend on their limited power. Recently, it is a hot issue to save the energy in a mobile ad-hoc network because a mobile nodes have a limited energy. Research of IEEE 802.11 PSM was proposed in a single hop ad-hoc assumption. If IEEE 802.11 PSM is applied to multi hop ad-hoc network, non-optimal paths will be generated by the mobile nodes which didn't receive a message of routing request. Non-optimal paths increase not only a network latency but also energy consumption of mobile nodes. Reconfiguring algorithm of non-optimal paths caused by the mobile nodes which didn't receive a message of routing request is proposed in this paper. A mobile node can overhear the data in his range. A wireless medium is shared by all mobile nodes using the same bandwidth. All mobile nodes lookout the non-optimal paths with these properties of a medium, if non-optimal path is generated, optimal reconfiguring will be accomplished by modifying routing table of itself or sending a request message of routing update to nearby nodes. By reconfiguring the non-optimal paths to optimized ones, network latency and energy consumption was decreased. It is confirmed to ignore the overhead caused by a algorithm presented in this paper through the result of the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.876-884
• /
• 2012

This paper introduces two multi-hop delay factors which can be caused by conventional TDMA scheduling; queueing delay and delay by random link scheduling, and proposes a new sequential scheduling scheme to resolve these two factors. We also simulate the TDMA network with the proposed link scheduling scheme and compare it with conventional(random) link scheduling scheme in terms of end-to-end packet transmission delay. From the simulation results, the more the average hop distance increases, the more the difference of the delay performance of both scheduling schemes increases. When the average number of hops is 2.66, 4.1, 4.75, and 6.3, the proposed sequential scheduling scheme reduces the average end-to-end delay by about 22%, 36%, 48%, and 55% respectively when compared to the random scheduling scheme.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.182-189
• /
• 2016

In this paper, we propose a buoy system based on multi-hop relay networks for ocean observation. The proposed system consists of various sensor modules, a gateway, wireless communication modules, and a remote monitoring site. The sensor modules are integrated with various communication interfaces and connected to the gateway of the proposed buoy system with an unified protocol based on controller area network (CAN)-bus. In order to communicate with the remote monitoring site and extend the coverage, the proposed system uses long-term evolution (LTE) router and XBee mesh network modules. The field test results show that the proposed system can extend the coverage using the proposed multi-hop relay network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.734-740
• /
• 2012

In this paper, we propose a method for throughput improvement in multirate multihop wireless networks with intra-session network coding. A multirate transmission supports several rates so that it has a tradeoff between transmission rate and transmission range, therefore multirate can cope with the performance degradation. We present the rate selection method with intra-session network coding in multirate nodes. The effective transmission rate is calculated by using intra-session network coding, and then its maximum effective transmission rate is selected. Concurrent transmission set is determined by selected transmission rate and then the linear programming is formulated for throughput calculation in multihop wireless networks. We evaluate the performance by using MATLAB and lp_solve programs in two topologies. It is shown that the throughput of the proposed method is improved.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.177-185
• /
• 2008

Research on media access control (MAC) scheme for Wireless Sensor Network (WSN) has been mainly focused on energy efficiency improvement, while interest on latency is relatively weak. However, end-to-end latency could be a critical limitation specifically in the multi-hop network such as wireless multimedia sensor networks. In this paper we propose a media access control scheme with distributed transmission power control to Improve end-to-end transmission latency as well as reduce power consumption in multi-hop wireless sensor networks. According to the simulation results, the proposed scheme is turned out to be an energy efficient scheme with improved end-to-end transmission latency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.1-6
• /
• 2007

In wireless mesh networks (WMNs), the end-to-end throughput of a flow decreases drastically according to the traversed number of hops due to interference among different hops of the same flow in addition to interference between hops of different flows with different paths. This paper proposes a distributed multi-channel assignment scheme based on hops (DMASH) to improve the performance of a static WMN. The proposed DMASH is a novel distributed multi-channel assignment scheme based on hops to enhance the end-to-end throughput by reducing interference between channels when transmitting packets in the IEEE 802.11 based multi-interface environments. The DMASH assigns a channel group to each hop, which has no interference between adjacent hops from a gateway in channel assignment phase, then each node selects its channel randomly among the channel group. Since the DMASH is a distributed scheme with unmanaged and auto-configuration of channel assignment, it has a less overhead and implementation complexity in algorithm than centralized multi-channel assignment schemes. Simulation results using the NS-2 showed that the DMASH could improve remarkably the total network throughput in multi-hop environments, comparing with a random channel assignment scheme.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.96-97
• /
• 2010

다중 홉 중계기술은 차세대 무선통신을 위한 핵심 기술로 최근 전 세계적으로 활발히 연구되고 있으며, 셀 용량 증대, 셀영역 확장, 음영지역 축소 등의 장점으로 인하여, IEEE 802.11s, 802.15.4, 802.16j 등의 표준화에의 반영을 위한 논의가 활발히 진행되고 있다. 본 논문에서는 간섭신호가 존재하지 않는 이상적 네트워크 환경을 고려한 기존 연구의 한계를 극복하기 위해, 다중 간섭신호가 존재하는 레일레이(Rayleigh) 페이딩 채널에서 이중 홉(dual-hop) 복호후재전송(DF : decode-and-forward) 중계시스템의 시스템 모델을 제안하고, 모의실험을 통하여 불능확률 및 4진 직교 진폭 변조(4-QAM)를 위한 평균비트오율 (average bit error rate) 성능을 살펴본다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.469-471
• /
• 2005

802.11 기반의 DCF 모드 상에서 하나의 패킷 전송을 위해서는 RTS-CTS-DATA-ACK 의 4가지 단계의 프레임 전송 과정이 이루어져야한다. 다중 홉 상태에서의 패킷 전송 또한 위 4단계를 거쳐서 종단 간에 패킷 전송이 이루어진다. 다중 홉 상태의 패킷 전송 단계에서는 전송 도중 패킷간의 충돌이 발생 할 수 있다. 이와 같은 충돌을 최소화 시키고 종단 간 패킷전송의 성능을 향상시키기 위한 연구가 진행되고 있다. 본 논문에서는 이러한 연구 중에 하나인 DCMA(Data-driven Cut-through Medium Access) 프로토콜[1]의 기능을 파악하고 이에 대한 보완 방법을 제안하여 이를 발전시킨 BCTMA (Bi-directional Cut-Through Medium Access) 프로토콜을 제안 한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.45-49
• /
• 2011

Cooperative multihop communications support effective transmissions over underwater acoustic channels as inferior wireless channels. But the performance of cooperative multihop systems may degrade due to the lack of cooperative nodes at the initial operation time duration. At the initial time duration, the lack of cooperative nodes causes more errors, and the multihop network propagates these errors. In this paper, we apply fountain code to the cooperative multihop system at the initial time duration, and show performance improvements by simulations.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.41-42
• /
• 2015

본 논문에서는 다수 1 차 사용자가 다수 존재하고 2 차 사용자들이 다중 홉 통신을 하는 스펙트럼 공유 방식 무선 인지 네트워크를 분석한다. 다수의 1 차 사용자로부터의 간섭신호를 고려하여 각 2 차 사용자에서의 수신 신호대간섭잡음비를 분석하고 이를 바탕으로 2 차 사용자 네트워크의 불능확률을 구한다. 모의실험을 통해 1 차 사용자의 수가 감소함에 따라 불능확률이 감소한다는 것을 확인하였다.